您尚未登录。

#1 2012-03-29 01:49:45

caasi
会员
注册时间: 2012-03-20
帖子: 51
个人网站

开启ssh或者mentohust后Arch无法正常关机(重启)

每次只要是忘了断开ssh或者mentohust(这个是用来在学校上网的),关机(重启)的时候就会卡住,屏幕上停在下面这条:

... ssh ... exit preempt_count 1

如果是mentohust没断开,也是提示exit preempt_count 1,一样卡住。只能按住电源键来关机。

离线

#2 2012-03-29 11:46:29

sigma
会员
注册时间: 2012-01-03
帖子: 183

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

caasi 说:

每次只要是忘了断开ssh或者mentohust(这个是用来在学校上网的),关机(重启)的时候就会卡住,屏幕上停在下面这条:

... ssh ... exit preempt_count 1

如果是mentohust没断开,也是提示exit preempt_count 1,一样卡住。只能按住电源键来关机。

不会吧。。。lz我也用mentohust的,没这个问题啊,你把network和mentohust放到daemons里去了么?


riverrun, past Eve and Adam's.

离线

#3 2012-03-29 23:33:10

caasi
会员
注册时间: 2012-03-20
帖子: 51
个人网站

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

sigma 说:
caasi 说:

每次只要是忘了断开ssh或者mentohust(这个是用来在学校上网的),关机(重启)的时候就会卡住,屏幕上停在下面这条:

... ssh ... exit preempt_count 1

如果是mentohust没断开,也是提示exit preempt_count 1,一样卡住。只能按住电源键来关机。

不会吧。。。lz我也用mentohust的,没这个问题啊,你把network和mentohust放到daemons里去了么?

没有阿

离线

#4 2012-03-29 23:58:23

sigma
会员
注册时间: 2012-01-03
帖子: 183

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

caasi 说:
sigma 说:
caasi 说:

每次只要是忘了断开ssh或者mentohust(这个是用来在学校上网的),关机(重启)的时候就会卡住,屏幕上停在下面这条:

... ssh ... exit preempt_count 1

如果是mentohust没断开,也是提示exit preempt_count 1,一样卡住。只能按住电源键来关机。

不会吧。。。lz我也用mentohust的,没这个问题啊,你把network和mentohust放到daemons里去了么?

没有阿

这个错误是内核抢占锁啊,你的mentohust是源码编译的?看看头文件里什么地方开了lock注释掉。。。
不过我觉得这样不是个办法。。。如此蛋疼,你不如yaourt装一下,我的就没问题


riverrun, past Eve and Adam's.

离线

#5 2012-03-30 00:23:23

caasi
会员
注册时间: 2012-03-20
帖子: 51
个人网站

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

sigma 说:
caasi 说:
sigma 说:
caasi 说:

每次只要是忘了断开ssh或者mentohust(这个是用来在学校上网的),关机(重启)的时候就会卡住,屏幕上停在下面这条:

... ssh ... exit preempt_count 1

如果是mentohust没断开,也是提示exit preempt_count 1,一样卡住。只能按住电源键来关机。

不会吧。。。lz我也用mentohust的,没这个问题啊,你把network和mentohust放到daemons里去了么?

没有阿

这个错误是内核抢占锁啊,你的mentohust是源码编译的?看看头文件里什么地方开了lock注释掉。。。
不过我觉得这样不是个办法。。。如此蛋疼,你不如yaourt装一下,我的就没问题

谢谢,mentohust确实不是编译安装的,当初只是把已编译的文件放到了相应位置。试过重新yaourt编译,貌似失败了,有一个pass的时候失败了……
不过ssh那个是怎么回事?关机的时候报的是一样的错,也是内核锁吗?我是安装的openssh

离线

#6 2012-03-30 22:52:30

sigma
会员
注册时间: 2012-01-03
帖子: 183

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

caasi 说:
sigma 说:
caasi 说:
sigma 说:
caasi 说:

每次只要是忘了断开ssh或者mentohust(这个是用来在学校上网的),关机(重启)的时候就会卡住,屏幕上停在下面这条:

... ssh ... exit preempt_count 1

如果是mentohust没断开,也是提示exit preempt_count 1,一样卡住。只能按住电源键来关机。

不会吧。。。lz我也用mentohust的,没这个问题啊,你把network和mentohust放到daemons里去了么?

没有阿

这个错误是内核抢占锁啊,你的mentohust是源码编译的?看看头文件里什么地方开了lock注释掉。。。
不过我觉得这样不是个办法。。。如此蛋疼,你不如yaourt装一下,我的就没问题

谢谢,mentohust确实不是编译安装的,当初只是把已编译的文件放到了相应位置。试过重新yaourt编译,貌似失败了,有一个pass的时候失败了……
不过ssh那个是怎么回事?关机的时候报的是一样的错,也是内核锁吗?我是安装的openssh

有可能是跟网络有关的都被锁了,具体我也没遇到过,贴日志来看看吧。dmesg,error和X的


riverrun, past Eve and Adam's.

离线

#7 2012-03-30 23:10:39

caasi
会员
注册时间: 2012-03-20
帖子: 51
个人网站

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

dmesg.log :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.13-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.3 (GCC) ) #1 SMP PREEMPT Sat Mar 24 08:09:57 UTC 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007b27c000 (usable)
[    0.000000]  BIOS-e820: 000000007b27c000 - 000000007b282000 (reserved)
[    0.000000]  BIOS-e820: 000000007b282000 - 000000007b3ee000 (usable)
[    0.000000]  BIOS-e820: 000000007b3ee000 - 000000007b40f000 (reserved)
[    0.000000]  BIOS-e820: 000000007b40f000 - 000000007b46f000 (usable)
[    0.000000]  BIOS-e820: 000000007b46f000 - 000000007b470000 (reserved)
[    0.000000]  BIOS-e820: 000000007b470000 - 000000007b4f1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007b4f1000 - 000000007b70f000 (reserved)
[    0.000000]  BIOS-e820: 000000007b70f000 - 000000007b717000 (usable)
[    0.000000]  BIOS-e820: 000000007b717000 - 000000007b71f000 (reserved)
[    0.000000]  BIOS-e820: 000000007b71f000 - 000000007b77f000 (usable)
[    0.000000]  BIOS-e820: 000000007b77f000 - 000000007b79f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007b79f000 - 000000007b7e0000 (usable)
[    0.000000]  BIOS-e820: 000000007b7e0000 - 000000007b7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007b7ff000 - 000000007b800000 (usable)
[    0.000000]  BIOS-e820: 000000007b800000 - 000000007c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8904000 - 00000000f8905000 (reserved)
[    0.000000]  BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI present.
[    0.000000] DMI: LENOVO                           IdeaPad Y460    /KL2                             , BIOS 27CN55WW   05/06/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7b800 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 07C000000 mask FFC000000 uncachable
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f6ad0] f6ad0
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] Base memory trampoline at [c0098000] 98000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[    0.000000] RAMDISK: 7afb0000 - 7b26c000
[    0.000000] Allocated new RAMDISK: 37542000 - 377fd16a
[    0.000000] Move RAMDISK from 000000007afb0000 - 000000007b26b169 to 37542000 - 377fd169
[    0.000000] ACPI: RSDP 000f6990 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 7b7f1fec 0005C (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7b7e2000 000F4 (v03 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: DSDT 7b7e3000 0CB82 (v02 LENOVO CB-01    06040000 INTL 20060912)
[    0.000000] ACPI: FACS 7b79bfc0 00040
[    0.000000] ACPI: HPET 7b7fed6a 00038 (v01 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: MCFG 7b7feda2 0003C (v01 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: APIC 7b7fedde 00084 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 7b7fee62 00028 (v01 LENOVO CB-01    06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 7b7fee8a 00176 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 7b7e1000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1088MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007b800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x0007b27c
[    0.000000]     0: 0x0007b282 -> 0x0007b3ee
[    0.000000]     0: 0x0007b40f -> 0x0007b46f
[    0.000000]     0: 0x0007b70f -> 0x0007b717
[    0.000000]     0: 0x0007b71f -> 0x0007b77f
[    0.000000]     0: 0x0007b79f -> 0x0007b7e0
[    0.000000]     0: 0x0007b7ff -> 0x0007b800
[    0.000000] On node 0 totalpages: 504958
[    0.000000] free_area_init_node: node 0, pgdat c060c880, node_mem_map f65d1200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3948 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2177 pages used for memmap
[    0.000000]   HighMem zone: 275571 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s31232 r0 d22016 u1048576
[    0.000000] pcpu-alloc: s31232 r0 d22016 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 501005
[    0.000000] Kernel command line: root=/dev/sda6 ro nomodeset
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8093440 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007b800)
[    0.000000] Memory: 1985580k/2023424k available (3766k kernel code, 34252k reserved, 1441k data, 524k init, 1110992k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0617000 - 0xc069a000   ( 524 kB)
[    0.000000]       .data : 0xc04ad9d5 - 0xc06160c0   (1441 kB)
[    0.000000]       .text : 0xc0100000 - 0xc04ad9d5   (3766 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f540a000 soft=f540c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] Detected 2261.891 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4525.27 BogoMIPS (lpj=7539636)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000043] Security Framework initialized
[    0.000063] AppArmor: AppArmor disabled by boot time parameter
[    0.000077] Mount-cache hash table entries: 512
[    0.000354] Initializing cgroup subsys cpuacct
[    0.000361] Initializing cgroup subsys memory
[    0.000368] Initializing cgroup subsys devices
[    0.000370] Initializing cgroup subsys freezer
[    0.000388] Initializing cgroup subsys net_cls
[    0.000390] Initializing cgroup subsys blkio
[    0.000432] CPU: Physical Processor ID: 0
[    0.000433] CPU: Processor Core ID: 0
[    0.000454] mce: CPU supports 9 MCE banks
[    0.000463] CPU0: Thermal monitoring handled by SMI
[    0.000487] using mwait in idle threads.
[    0.001983] ACPI: Core revision 20110623
[    0.024161] ftrace: allocating 16587 entries in 33 pages
[    0.034600] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.035440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068561] CPU0: Intel(R) Core(TM) i3 CPU       M 350  @ 2.27GHz stepping 02
[    0.173275] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.173281] ... version:                3
[    0.173283] ... bit width:              48
[    0.173300] ... generic registers:      4
[    0.173302] ... value mask:             0000ffffffffffff
[    0.173303] ... max period:             000000007fffffff
[    0.173304] ... fixed-purpose events:   3
[    0.173306] ... event mask:             000000070000000f
[    0.193432] NMI watchdog enabled, takes one hw-pmu counter.
[    0.219891] CPU 1 irqstacks, hard=f550a000 soft=f550c000
[    0.219913] Booting Node   0, Processors  #1
[    0.219918] smpboot cpu 1: start_ip = 98000
[    0.230176] Initializing CPU#1
[    0.313029] CPU1: Thermal monitoring handled by SMI
[    0.333169] NMI watchdog enabled, takes one hw-pmu counter.
[    0.353007] CPU 2 irqstacks, hard=f5518000 soft=f551a000
[    0.353009]  #2
[    0.353010] smpboot cpu 2: start_ip = 98000
[    0.363271] Initializing CPU#2
[    0.446091] CPU2: Thermal monitoring handled by SMI
[    0.466222] NMI watchdog enabled, takes one hw-pmu counter.
[    0.486072] CPU 3 irqstacks, hard=f5526000 soft=f5528000
[    0.486074]  #3 Ok.
[    0.486076] smpboot cpu 3: start_ip = 98000
[    0.496335] Initializing CPU#3
[    0.579154] CPU3: Thermal monitoring handled by SMI
[    0.599360] NMI watchdog enabled, takes one hw-pmu counter.
[    0.605741] Brought up 4 CPUs
[    0.605763] Total of 4 processors activated (18099.75 BogoMIPS).
[    0.610433] devtmpfs: initialized
[    0.610790] PM: Registering ACPI NVS region at 7b470000 (528384 bytes)
[    0.610803] PM: Registering ACPI NVS region at 7b77f000 (131072 bytes)
[    0.612767] print_constraints: dummy: 
[    0.612866] NET: Registered protocol family 16
[    0.613099] ACPI: bus type pci registered
[    0.613254] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.613257] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.613259] PCI: Using MMCONFIG for extended config space
[    0.613260] PCI: Using configuration type 1 for base access
[    0.614392] bio: create slab <bio-0> at 0
[    0.614517] ACPI: Added _OSI(Module Device)
[    0.614519] ACPI: Added _OSI(Processor Device)
[    0.614521] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.614523] ACPI: Added _OSI(Processor Aggregator Device)
[    0.618217] ACPI: EC: Look up EC in DSDT
[    0.632045] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.632827] ACPI: SSDT 7b71a918 003F0 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.633702] ACPI: Dynamic OEM Table Load:
[    0.633704] ACPI: SSDT   (null) 003F0 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.634015] ACPI: SSDT 7b718018 00842 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.634836] ACPI: Dynamic OEM Table Load:
[    0.634855] ACPI: SSDT   (null) 00842 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.652858] ACPI: SSDT 7b719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.653829] ACPI: Dynamic OEM Table Load:
[    0.653832] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.662522] ACPI: SSDT 7b717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.663422] ACPI: Dynamic OEM Table Load:
[    0.663424] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.676474] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.928925] ACPI: Interpreter enabled
[    0.928940] ACPI: (supports S0 S3 S4 S5)
[    0.928969] ACPI: Using IOAPIC for interrupt routing
[    1.055739] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.056069] ACPI: No dock devices found.
[    1.056072] HEST: Table not found.
[    1.056076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.056629] \_SB_.PCI0:_OSC invalid UUID
[    1.056630] _OSC request data:1 8 1f 
[    1.056635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.057534] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.057537] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.057540] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.057543] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.057545] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.057547] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.057550] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[    1.057570] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.057633] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.057682] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.057794] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.057798] pci 0000:00:01.0: PME# disabled
[    1.057915] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.057971] pci 0000:00:16.0: reg 10: [mem 0xf8905800-0xf890580f 64bit]
[    1.058207] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.058213] pci 0000:00:16.0: PME# disabled
[    1.058289] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.058365] pci 0000:00:1a.0: reg 10: [mem 0xf8906000-0xf89063ff]
[    1.058596] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.058608] pci 0000:00:1a.0: PME# disabled
[    1.058662] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.058722] pci 0000:00:1b.0: reg 10: [mem 0xf8900000-0xf8903fff 64bit]
[    1.058930] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.058941] pci 0000:00:1b.0: PME# disabled
[    1.058990] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.059225] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.059232] pci 0000:00:1c.0: PME# disabled
[    1.059284] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.059525] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.059532] pci 0000:00:1c.1: PME# disabled
[    1.059587] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    1.059803] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.059810] pci 0000:00:1c.3: PME# disabled
[    1.059884] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    1.060102] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.060109] pci 0000:00:1c.4: PME# disabled
[    1.060202] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.060244] pci 0000:00:1d.0: reg 10: [mem 0xf8906400-0xf89067ff]
[    1.060480] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.060510] pci 0000:00:1d.0: PME# disabled
[    1.060552] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.060733] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.061028] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.061081] pci 0000:00:1f.2: reg 10: [io  0x1830-0x1837]
[    1.061101] pci 0000:00:1f.2: reg 14: [io  0x1824-0x1827]
[    1.061120] pci 0000:00:1f.2: reg 18: [io  0x1828-0x182f]
[    1.061142] pci 0000:00:1f.2: reg 1c: [io  0x1820-0x1823]
[    1.061184] pci 0000:00:1f.2: reg 20: [io  0x1800-0x181f]
[    1.061207] pci 0000:00:1f.2: reg 24: [mem 0xf8905000-0xf89057ff]
[    1.061354] pci 0000:00:1f.2: PME# supported from D3hot
[    1.061361] pci 0000:00:1f.2: PME# disabled
[    1.061397] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.061436] pci 0000:00:1f.3: reg 10: [mem 0xf8906800-0xf89068ff 64bit]
[    1.061515] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    1.061604] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.061685] pci 0000:00:1f.6: reg 10: [mem 0xf8904000-0xf8904fff 64bit]
[    1.061990] pci 0000:01:00.0: [1002:68c1] type 0 class 0x000300
[    1.062022] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.062051] pci 0000:01:00.0: reg 18: [mem 0xf8400000-0xf841ffff 64bit]
[    1.062067] pci 0000:01:00.0: reg 20: [io  0x2000-0x20ff]
[    1.062121] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.062203] pci 0000:01:00.0: supports D1 D2
[    1.062270] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[    1.062305] pci 0000:01:00.1: reg 10: [mem 0xf8420000-0xf8423fff 64bit]
[    1.062489] pci 0000:01:00.1: supports D1 D2
[    1.062580] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.062584] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.062590] pci 0000:00:01.0:   bridge window [mem 0xf8400000-0xf84fffff]
[    1.062596] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.062753] pci 0000:03:00.0: [197b:2387] type 0 class 0x000880
[    1.062792] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf80000ff]
[    1.062971] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    1.063217] pci 0000:03:00.2: [197b:2386] type 0 class 0x000805
[    1.063255] pci 0000:03:00.2: reg 10: [mem 0xf8100400-0xf81004ff]
[    1.063657] pci 0000:03:00.3: [197b:2388] type 0 class 0x000880
[    1.063713] pci 0000:03:00.3: reg 10: [mem 0xf8100800-0xf81008ff]
[    1.064115] pci 0000:03:00.4: [197b:2389] type 0 class 0x000880
[    1.064154] pci 0000:03:00.4: reg 10: [mem 0xf8100c00-0xf8100cff]
[    1.068349] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.068355] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.068362] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    1.068374] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.068553] pci 0000:05:00.0: [8086:0084] type 0 class 0x000280
[    1.068635] pci 0000:05:00.0: reg 10: [mem 0xf8500000-0xf8501fff 64bit]
[    1.068954] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    1.068965] pci 0000:05:00.0: PME# disabled
[    1.069094] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.069111] pci 0000:00:1c.1:   bridge window [mem 0xf8500000-0xf85fffff]
[    1.069245] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[    1.069254] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.069261] pci 0000:00:1c.3:   bridge window [mem 0xf8200000-0xf83fffff]
[    1.069277] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.069456] pci 0000:09:00.0: [14e4:1692] type 0 class 0x000200
[    1.069531] pci 0000:09:00.0: reg 10: [mem 0xf8600000-0xf860ffff 64bit]
[    1.069837] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    1.069845] pci 0000:09:00.0: PME# disabled
[    1.069978] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
[    1.069990] pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf86fffff]
[    1.070164] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[    1.070186] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.070188] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.070190] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.070193] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.070195] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.070197] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    1.070200] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[    1.070282] pci_bus 0000:00: on NUMA node 0
[    1.070286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.070673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.070869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.071085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.071213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.071306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.071402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    1.071561] \_SB_.PCI0:_OSC invalid UUID
[    1.071565] _OSC request data:1 1f 1f 
[    1.071570]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.071631] \_SB_.PCI0:_OSC invalid UUID
[    1.071632] _OSC request data:1 0 1d 
[    1.071641]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.071642] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.081145] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.081250] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.081276] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.081298] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.081343] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.081362] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.081384] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.081413] pci_bus 0000:ff: on NUMA node 0
[    1.081446]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    1.081448]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.081450] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.081829] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.081908] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.081964] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.082039] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.082094] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.082168] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.082228] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.082303] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.082452] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.082459] vgaarb: loaded
[    1.082460] vgaarb: bridge control possible 0000:01:00.0
[    1.082562] PCI: Using ACPI for IRQ routing
[    1.105670] PCI: pci_cache_line_size set to 64 bytes
[    1.105849] reserve RAM buffer: 000000000009c400 - 000000000009ffff 
[    1.105852] reserve RAM buffer: 000000007b27c000 - 000000007bffffff 
[    1.105856] reserve RAM buffer: 000000007b3ee000 - 000000007bffffff 
[    1.105860] reserve RAM buffer: 000000007b46f000 - 000000007bffffff 
[    1.105863] reserve RAM buffer: 000000007b717000 - 000000007bffffff 
[    1.105866] reserve RAM buffer: 000000007b77f000 - 000000007bffffff 
[    1.105869] reserve RAM buffer: 000000007b7e0000 - 000000007bffffff 
[    1.105871] reserve RAM buffer: 000000007b800000 - 000000007bffffff 
[    1.106029] NetLabel: Initializing
[    1.106031] NetLabel:  domain hash size = 128
[    1.106032] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.106044] NetLabel:  unlabeled traffic allowed by default
[    1.106081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.106087] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.108161] Switching to clocksource hpet
[    1.116585] pnp: PnP ACPI init
[    1.116604] ACPI: bus type pnp registered
[    1.117100] pnp 00:00: [bus 00-fe]
[    1.117104] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.117106] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.117109] pnp 00:00: [io  0x0d00-0xffff window]
[    1.117111] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.117113] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.117115] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.117117] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.117119] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.117121] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.117123] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.117124] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.117126] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.117128] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.117130] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.117132] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.117134] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.117136] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.117164] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[    1.117166] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.117242] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.117320] pnp 00:01: [io  0x0000-0x001f]
[    1.117323] pnp 00:01: [io  0x0081-0x0091]
[    1.117325] pnp 00:01: [io  0x0093-0x009f]
[    1.117326] pnp 00:01: [io  0x00c0-0x00df]
[    1.117329] pnp 00:01: [dma 4]
[    1.117362] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.117371] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.117424] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.117535] pnp 00:03: [irq 0 disabled]
[    1.117547] pnp 00:03: [irq 8]
[    1.117548] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.117586] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.117596] pnp 00:04: [io  0x00f0]
[    1.117604] pnp 00:04: [irq 13]
[    1.117659] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.117670] pnp 00:05: [io  0x002e-0x002f]
[    1.117673] pnp 00:05: [io  0x004e-0x004f]
[    1.117675] pnp 00:05: [io  0x0061]
[    1.117677] pnp 00:05: [io  0x0063]
[    1.117678] pnp 00:05: [io  0x0065]
[    1.117680] pnp 00:05: [io  0x0067]
[    1.117682] pnp 00:05: [io  0x0070]
[    1.117684] pnp 00:05: [io  0x0080]
[    1.117685] pnp 00:05: [io  0x0092]
[    1.117690] pnp 00:05: [io  0x00b2-0x00b3]
[    1.117692] pnp 00:05: [io  0x0680-0x069f]
[    1.117694] pnp 00:05: [io  0x0500-0x050f]
[    1.117696] pnp 00:05: [io  0x0600-0x0603]
[    1.117698] pnp 00:05: [io  0xffff]
[    1.117700] pnp 00:05: [io  0x0400-0x047f]
[    1.117703] pnp 00:05: [io  0x1180-0x11ff]
[    1.117704] pnp 00:05: [io  0x164e-0x164f]
[    1.117706] pnp 00:05: [io  0xfe00]
[    1.117707] pnp 00:05: [io  0x0068]
[    1.117709] pnp 00:05: [io  0x006c]
[    1.117711] pnp 00:05: [io  0x0700-0x070f]
[    1.117800] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.117803] system 00:05: [io  0x0500-0x050f] has been reserved
[    1.117806] system 00:05: [io  0x0600-0x0603] has been reserved
[    1.117809] system 00:05: [io  0xffff] has been reserved
[    1.117811] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.117814] system 00:05: [io  0x1180-0x11ff] has been reserved
[    1.117818] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.117820] system 00:05: [io  0xfe00] has been reserved
[    1.117822] system 00:05: [io  0x0700-0x070f] has been reserved
[    1.117825] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.117882] pnp 00:06: [io  0x06a0-0x06af]
[    1.117884] pnp 00:06: [io  0x06b0-0x06ff]
[    1.117940] system 00:06: [io  0x06a0-0x06af] has been reserved
[    1.117943] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    1.117946] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.118002] pnp 00:07: [io  0x0070-0x0077]
[    1.118036] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.118070] pnp 00:08: [io  0x0060]
[    1.118072] pnp 00:08: [io  0x0064]
[    1.118079] pnp 00:08: [irq 1]
[    1.118134] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.118170] pnp 00:09: [irq 12]
[    1.118204] pnp 00:09: Plug and Play ACPI device, IDs SYN1038 SYN1000 SYN0002 PNP0f13 (active)
[    1.118883] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.118887] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[    1.118889] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    1.118891] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    1.118894] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    1.118896] pnp 00:0a: [mem 0x00000000-0xffffffff disabled]
[    1.118898] pnp 00:0a: [mem 0x7c000000-0x7c000fff]
[    1.118900] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.118902] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[    1.118904] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    1.118906] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    1.118909] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.118911] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.119018] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.119021] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.119023] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.119026] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.119030] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    1.119033] system 00:0a: [mem 0x7c000000-0x7c000fff] has been reserved
[    1.119036] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.119039] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.119042] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.119044] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    1.119047] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.119050] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.119283] pnp 00:0b: [bus ff]
[    1.119361] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.131636] pnp: PnP ACPI: found 12 devices
[    1.131638] ACPI: ACPI bus type pnp unregistered
[    1.171746] PCI: max bus depth: 1 pci_try_num: 2
[    1.171869] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7c100000-0x7c2fffff 64bit pref]
[    1.171873] pci 0000:00:1c.4: BAR 13: assigned [io  0x5000-0x5fff]
[    1.171878] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c300000-0x7c4fffff 64bit pref]
[    1.171882] pci 0000:00:1c.1: BAR 13: assigned [io  0x6000-0x6fff]
[    1.171887] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8440000-0xf845ffff pref]
[    1.171891] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.171894] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.171899] pci 0000:00:01.0:   bridge window [mem 0xf8400000-0xf84fffff]
[    1.171903] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.171914] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
[    1.171916] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.171944] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.171953] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    1.171959] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.171970] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.171974] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[    1.171984] pci 0000:00:1c.1:   bridge window [mem 0xf8500000-0xf85fffff]
[    1.171991] pci 0000:00:1c.1:   bridge window [mem 0x7c300000-0x7c4fffff 64bit pref]
[    1.172004] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[    1.172008] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.172021] pci 0000:00:1c.3:   bridge window [mem 0xf8200000-0xf83fffff]
[    1.172029] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.172040] pci 0000:00:1c.4: PCI bridge to [bus 09-09]
[    1.172043] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
[    1.172052] pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf86fffff]
[    1.172059] pci 0000:00:1c.4:   bridge window [mem 0x7c100000-0x7c2fffff 64bit pref]
[    1.172072] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[    1.172129] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.172133] pci 0000:00:01.0: setting latency timer to 64
[    1.172142] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.172148] pci 0000:00:1c.0: setting latency timer to 64
[    1.172167] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.172174] pci 0000:00:1c.1: setting latency timer to 64
[    1.172188] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.172194] pci 0000:00:1c.3: setting latency timer to 64
[    1.172206] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.172213] pci 0000:00:1c.4: setting latency timer to 64
[    1.172247] pci 0000:00:1e.0: setting latency timer to 64
[    1.172251] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.172253] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.172255] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.172257] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.172259] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.172262] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.172264] pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
[    1.172266] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.172268] pci_bus 0000:01: resource 1 [mem 0xf8400000-0xf84fffff]
[    1.172270] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.172273] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    1.172275] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf81fffff]
[    1.172277] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.172280] pci_bus 0000:05: resource 0 [io  0x6000-0x6fff]
[    1.172282] pci_bus 0000:05: resource 1 [mem 0xf8500000-0xf85fffff]
[    1.172285] pci_bus 0000:05: resource 2 [mem 0x7c300000-0x7c4fffff 64bit pref]
[    1.172287] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    1.172289] pci_bus 0000:07: resource 1 [mem 0xf8200000-0xf83fffff]
[    1.172292] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.172295] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    1.172297] pci_bus 0000:09: resource 1 [mem 0xf8600000-0xf86fffff]
[    1.172300] pci_bus 0000:09: resource 2 [mem 0x7c100000-0x7c2fffff 64bit pref]
[    1.172303] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    1.172306] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    1.172308] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    1.172310] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.172312] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.172314] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.172317] pci_bus 0000:0a: resource 10 [mem 0x7c000000-0xfeafffff]
[    1.172375] NET: Registered protocol family 2
[    1.172432] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.172650] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.173542] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.173972] TCP: Hash tables configured (established 131072 bind 65536)
[    1.173974] TCP reno registered
[    1.173977] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.174011] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.174079] NET: Registered protocol family 1
[    1.174129] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.174164] pci 0000:00:1a.0: PCI INT A disabled
[    1.174207] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.174235] pci 0000:00:1d.0: PCI INT A disabled
[    1.174281] pci 0000:01:00.0: Boot video device
[    1.174346] PCI: CLS 64 bytes, default 64
[    1.174399] Unpacking initramfs...
[    1.264546] Freeing initrd memory: 2800k freed
[    1.265364] Simple Boot Flag at 0x36 set to 0x1
[    1.265898] apm: BIOS not found.
[    1.266168] audit: initializing netlink socket (disabled)
[    1.266180] type=2000 audit(1333145605.103:1): initialized
[    1.269288] highmem bounce pool size: 64 pages
[    1.269295] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.276583] VFS: Disk quotas dquot_6.5.2
[    1.276673] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.276798] msgmni has been set to 1713
[    1.277084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.277149] io scheduler noop registered
[    1.277152] io scheduler deadline registered
[    1.277160] io scheduler cfq registered (default)
[    1.277329] pcieport 0000:00:01.0: setting latency timer to 64
[    1.277412] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.278166] intel_idle: MWAIT substates: 0x1120
[    1.278169] intel_idle: v0.4 model 0x25
[    1.278171] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.278263] ERST: Table is not found!
[    1.278264] GHES: HEST is not enabled!
[    1.278280] isapnp: Scanning for PnP cards...
[    1.642007] isapnp: No Plug & Play device found
[    1.642137] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.830769] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.836144] i8042: Detected active multiplexing controller, rev 1.1
[    1.837634] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.837669] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.837703] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.837754] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.837777] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.837968] mousedev: PS/2 mouse device common for all mice
[    1.838080] rtc_cmos 00:07: RTC can wake from S4
[    1.838304] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.838355] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.838556] cpuidle: using governor ladder
[    1.838814] cpuidle: using governor menu
[    1.839081] TCP cubic registered
[    1.839228] NET: Registered protocol family 10
[    1.839879] NET: Registered protocol family 17
[    1.839883] Registering the dns_resolver key type
[    1.839907] Using IPI No-Shortcut mode
[    1.840241] PM: Hibernation image not present or could not be loaded.
[    1.840245] registered taskstats version 1
[    1.844192] rtc_cmos 00:07: setting system clock to 2012-03-30 22:13:26 UTC (1333145606)
[    1.844283] Initializing network drop monitor service
[    1.844527] Freeing unused kernel memory: 524k freed
[    1.844774] Write protecting the kernel text: 3768k
[    1.844843] Write protecting the kernel read-only data: 1112k
[    1.862874] udevd[44]: starting version 181
[    1.882445] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.912490] usbcore: registered new interface driver usbfs
[    1.912549] usbcore: registered new interface driver hub
[    1.912697] usbcore: registered new device driver usb
[    1.913378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.913413] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.913499] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.913509] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.913577] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.913694] ehci_hcd 0000:00:1a.0: debug port 2
[    1.917699] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.917738] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf8906000
[    1.927033] SCSI subsystem initialized
[    1.930496] libata version 3.00 loaded.
[    1.933354] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.933911] hub 1-0:1.0: USB hub found
[    1.933917] hub 1-0:1.0: 3 ports detected
[    1.934079] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.934135] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.934140] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.934153] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.934203] ehci_hcd 0000:00:1d.0: debug port 2
[    1.938205] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.938228] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf8906400
[    1.949981] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.950231] hub 2-0:1.0: USB hub found
[    1.950236] hub 2-0:1.0: 3 ports detected
[    1.950688] ahci 0000:00:1f.2: version 3.0
[    1.950704] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.950818] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.950876] ahci: SSS flag set, parallel bus scan disabled
[    1.951502] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.951508] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.951515] ahci 0000:00:1f.2: setting latency timer to 64
[    1.970670] scsi0 : ahci
[    1.970801] scsi1 : ahci
[    1.970927] scsi2 : ahci
[    1.971051] scsi3 : ahci
[    1.971171] scsi4 : ahci
[    1.971290] scsi5 : ahci
[    1.971425] ata1: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905100 irq 41
[    1.971429] ata2: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905180 irq 41
[    1.971432] ata3: DUMMY
[    1.971433] ata4: DUMMY
[    1.971436] ata5: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905300 irq 41
[    1.971440] ata6: SATA max UDMA/133 abar m2048@0xf8905000 port 0xf8905380 irq 41
[    2.239370] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.266033] Refined TSC clocksource calibration: 2260.997 MHz.
[    2.266038] Switching to clocksource tsc
[    2.289319] ata1: SATA link down (SStatus 0 SControl 300)
[    2.363108] hub 1-1:1.0: USB hub found
[    2.363165] hub 1-1:1.0: 6 ports detected
[    2.468929] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.592794] hub 2-1:1.0: USB hub found
[    2.592967] hub 2-1:1.0: 8 ports detected
[    2.608687] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.609590] ata2.00: ATA-8: HITACHI HTS725032A9A364, PC3ZC70F, max UDMA/100
[    2.609593] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.610715] ata2.00: configured for UDMA/100
[    2.610881] scsi 1:0:0:0: Direct-Access     ATA      HITACHI HTS72503 PC3Z PQ: 0 ANSI: 5
[    2.671950] usb 1-1.6: new full-speed USB device number 3 using ehci_hcd
[    2.858328] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[    2.928235] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.930813] ata5.00: ATAPI: HL-DT-STDVDRAM GT30N, LC01, max UDMA/100
[    2.933803] ata5.00: configured for UDMA/100
[    2.938883] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     LC01 PQ: 0 ANSI: 5
[    3.011276] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[    3.257393] ata6: SATA link down (SStatus 0 SControl 300)
[    3.261162] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
[    3.261302] generic-usb 0003:0461:4D80.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    3.261333] usbcore: registered new interface driver usbhid
[    3.261336] usbhid: USB HID core driver
[    3.264149] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.264265] sd 1:0:0:0: [sda] Write Protect is off
[    3.264268] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.264315] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.332635]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[    3.333551] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.338862] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.338869] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.339180] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.206864] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.611610] udevd[153]: starting version 181
[    5.925075] fuse init (API version 7.17)
[    6.166090] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    6.221467] ACPI: Lid Switch [LID]
[    6.221542] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    6.221590] ACPI: Power Button [PWRB]
[    6.221646] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[    6.221710] ACPI: Sleep Button [SLPB]
[    6.221827] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    6.221950] ACPI: Power Button [PWRF]
[    6.288065] thermal LNXTHERM:00: registered as thermal_zone0
[    6.288068] ACPI: Thermal Zone [TZ00] (35 C)
[    6.304926] acpi device:03: registered as cooling_device4
[    6.304998] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[    6.305062] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.430322] iTCO_vendor_support: vendor-support=0
[    6.452146] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    6.513085] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    6.513115] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.513180] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[    6.513390] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    6.516987] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    6.517208] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.517216] mei 0000:00:16.0: setting latency timer to 64
[    6.517277] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[    6.537951] cfg80211: Calling CRDA to update world regulatory domain
[    6.558126] Bluetooth: Core ver 2.16
[    6.558152] NET: Registered protocol family 31
[    6.558155] Bluetooth: HCI device and connection manager initialized
[    6.558159] Bluetooth: HCI socket layer initialized
[    6.558161] Bluetooth: L2CAP socket layer initialized
[    6.558168] Bluetooth: SCO socket layer initialized
[    6.584952] Linux agpgart interface v0.103
[    6.636664] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.637101] usbcore: registered new interface driver btusb
[    6.790542] Linux media interface: v0.10
[    6.865450] psmouse serio3: hgpk: ID: 10 00 64
[    7.133078] ACPI: Battery Slot [BAT1] (battery present)
[    7.166249] sdhci: Secure Digital Host Controller Interface driver
[    7.166251] sdhci: Copyright(c) Pierre Ossman
[    7.182985] ACPI: AC Adapter [ACAD] (on-line)
[    7.183281] wmi: Mapper loaded
[    7.191420] tg3.c:v3.121 (November 2, 2011)
[    7.191467] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.191478] tg3 0000:09:00.0: setting latency timer to 64
[    7.311622] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    7.311710] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[    7.311798] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.314283] tg3 mdio bus: probed
[    7.325321] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address c8:0a:a9:78:ec:3e
[    7.325324] tg3 0000:09:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=900:01)
[    7.325327] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    7.325330] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    7.326046] [drm] Initialized drm 1.1.0 20060810
[    7.353698] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    7.353701] Copyright(c) 2003-2011 Intel Corporation
[    7.353747] iwlwifi 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.353756] iwlwifi 0000:05:00.0: setting latency timer to 64
[    7.353779] iwlwifi 0000:05:00.0: pci_resource_len = 0x00002000
[    7.353781] iwlwifi 0000:05:00.0: pci_resource_base = f8aac000
[    7.353783] iwlwifi 0000:05:00.0: HW Revision ID = 0x0
[    7.353857] iwlwifi 0000:05:00.0: irq 43 for MSI/MSI-X
[    7.353888] iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    7.353947] iwlwifi 0000:05:00.0: L1 Enabled; Disabling L0S
[    7.370863] Linux video capture interface: v2.00
[    7.373668] iwlwifi 0000:05:00.0: device EEPROM VER=0x15d, CALIB=0x6
[    7.373671] iwlwifi 0000:05:00.0: Device SKU: 0X50
[    7.373673] iwlwifi 0000:05:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[    7.373682] iwlwifi 0000:05:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[    7.395716] jmb38x_ms 0000:03:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.395726] jmb38x_ms 0000:03:00.3: setting latency timer to 64
[    7.414638] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2386] (rev 20)
[    7.414655] sdhci-pci 0000:03:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.414682] sdhci-pci 0000:03:00.2: setting latency timer to 64
[    7.414693] _regulator_get: 0000:03:00.2 supply vmmc not found, using dummy regulator
[    7.414740] Registered led device: mmc0::
[    7.415779] mmc0: SDHCI controller on PCI [0000:03:00.2] using DMA
[    7.435566] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0190)
[    7.437758] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input8
[    7.437902] usbcore: registered new interface driver uvcvideo
[    7.437906] USB Video Class driver (1.1.1)
[    7.489233] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input9
[    7.499242] input: Ideapad extra buttons as /devices/platform/ideapad/input/input10
[    7.627986] iwlwifi 0000:05:00.0: loaded firmware version 39.31.5.1 build 35138
[    7.628124] Registered led device: phy0-led
[    7.650676] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    7.650683] ACPI: resource 0000:00:1f.3 [io  0x1840-0x185f] conflicts with ACPI region SMBI [io 0x1840-0x184f]
[    7.650686] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.677547] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    7.845360] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.845451] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    7.845519] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.894278] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[    7.901340] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.901503] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.901825] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.901953] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    7.902021] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    7.947487] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    7.947677] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    8.079230] [drm] VGACON disable radeon kernel modesetting.
[    8.079744] pci 0000:01:00.0: power state changed by ACPI to D0
[    8.079749] pci 0000:01:00.0: power state changed by ACPI to D0
[    8.079759] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.079767] pci 0000:01:00.0: setting latency timer to 64
[    8.080022] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.080025] [drm] No driver support for vblank timestamp query.
[    8.080028] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[    8.179638] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.179642] Disabling lock debugging due to kernel taint
[    8.243573] [fglrx] Maximum main memory to use for locked dma buffers: 1818 MBytes.
[    8.243936] [fglrx]   vendor: 1002 device: 68c1 count: 1
[    8.244572] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[    8.244582] pci 0000:01:00.0: setting latency timer to 64
[    8.244860] [fglrx] Kernel PAT support is enabled
[    8.244903] [fglrx] module loaded - fglrx 8.95.3 [Feb 14 2012] with 1 minors
[    8.376553] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[    8.420797] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input15
[    8.641437] EXT4-fs (sda6): re-mounted. Opts: (null)
[    8.650877] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    8.712597] Adding 2006012k swap on /dev/sda7.  Priority:-1 extents:1 across:2006012k 

errors.log :

Mar 25 10:41:19 localhost kernel: [ 4002.543337] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 25 10:41:19 localhost kernel: [ 4002.543344] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 25 10:41:19 localhost kernel: [ 4002.546268] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 25 10:41:19 localhost kernel: [ 4002.546297] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 25 10:41:19 localhost kernel: [ 4002.549007] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 25 10:41:19 localhost kernel: [ 4002.549010] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 25 10:41:38 localhost udevd[24316]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
Mar 25 10:41:38 localhost udevd[24316]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
Mar 25 12:30:19 localhost dhcpcd[1118]: eth0: sendmsg: Cannot assign requested address
Mar 25 12:36:11 localhost kernel: [    6.444119] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 25 12:36:12 localhost /usr/sbin/crond[551]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 25 12:36:16 localhost dhcpcd[640]: eth0: sendmsg: Cannot assign requested address
Mar 25 12:36:42 localhost pulseaudio[1010]: [pulseaudio] pid.c: Daemon already running.
Mar 25 13:55:45 localhost kernel: [    7.095340] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 25 13:55:46 localhost /usr/sbin/crond[549]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 25 13:55:50 localhost dhcpcd[639]: eth0: sendmsg: Cannot assign requested address
Mar 25 18:00:55 localhost kernel: [    6.389762] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 25 18:00:56 localhost /usr/sbin/crond[548]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 25 18:01:00 localhost dhcpcd[639]: eth0: sendmsg: Cannot assign requested address
Mar 25 18:01:27 localhost pulseaudio[1001]: [pulseaudio] pid.c: Daemon already running.
Mar 25 22:40:43 localhost kernel: [    6.191341] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 25 22:40:44 localhost /usr/sbin/crond[541]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 25 22:40:47 localhost dhcpcd[592]: eth0: sendmsg: Cannot assign requested address
Mar 25 23:20:39 localhost kernel: [    6.471105] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 25 23:20:40 localhost /usr/sbin/crond[539]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 25 23:20:43 localhost dhcpcd[592]: eth0: sendmsg: Cannot assign requested address
Mar 25 23:21:06 localhost pulseaudio[905]: [pulseaudio] pid.c: Daemon already running.
Mar 25 23:58:10 localhost kernel: [    6.020390] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 25 23:58:11 localhost /usr/sbin/crond[541]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 25 23:58:15 localhost dhcpcd[594]: eth0: sendmsg: Cannot assign requested address
Mar 25 23:58:38 localhost pulseaudio[902]: [pulseaudio] pid.c: Daemon already running.
Mar 26 00:06:09 localhost kernel: [    7.515609] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 00:06:10 localhost /usr/sbin/crond[540]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 00:06:13 localhost dhcpcd[593]: eth0: sendmsg: Cannot assign requested address
Mar 26 00:06:38 localhost pulseaudio[928]: [pulseaudio] pid.c: Daemon already running.
Mar 26 00:29:17 localhost kernel: [    6.368105] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 00:29:18 localhost /usr/sbin/crond[548]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 00:29:22 localhost dhcpcd[601]: eth0: sendmsg: Cannot assign requested address
Mar 26 00:29:44 localhost pulseaudio[921]: [pulseaudio] pid.c: Daemon already running.
Mar 26 12:36:43 localhost kernel: [    6.422452] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 12:36:45 localhost /usr/sbin/crond[572]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 12:36:49 localhost dhcpcd[642]: eth0: sendmsg: Cannot assign requested address
Mar 26 12:37:26 localhost pulseaudio[990]: [pulseaudio] pid.c: Daemon already running.
Mar 26 13:21:50 localhost pulseaudio[4760]: [pulseaudio] pid.c: Daemon already running.
Mar 26 13:43:10 localhost pulseaudio[10462]: [pulseaudio] pid.c: Daemon already running.
Mar 26 13:43:10 localhost pulseaudio[929]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 26 13:43:10 localhost pulseaudio[929]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 26 13:49:18 localhost sudo: pam_unix(sudo:auth): conversation failed
Mar 26 14:03:50 localhost pulseaudio[14871]: [pulseaudio] pid.c: Daemon already running.
Mar 26 14:03:50 localhost pulseaudio[929]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 26 14:03:50 localhost pulseaudio[929]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 26 14:12:46 localhost pulseaudio[15816]: [pulseaudio] pid.c: Daemon already running.
Mar 26 14:12:46 localhost pulseaudio[929]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 26 14:12:46 localhost pulseaudio[929]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 26 14:25:55 localhost pulseaudio[17049]: [pulseaudio] pid.c: Daemon already running.
Mar 26 14:25:55 localhost pulseaudio[929]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 26 14:25:55 localhost pulseaudio[929]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 26 14:34:32 localhost pulseaudio[18176]: [pulseaudio] pid.c: Daemon already running.
Mar 26 14:34:32 localhost pulseaudio[929]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 26 14:34:32 localhost pulseaudio[929]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 26 18:09:24 localhost kernel: [    9.492348] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 18:09:26 localhost /usr/sbin/crond[549]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 18:09:30 localhost dhcpcd[612]: eth0: sendmsg: Cannot assign requested address
Mar 26 18:09:54 localhost pulseaudio[953]: [pulseaudio] pid.c: Daemon already running.
Mar 26 22:21:14 localhost dhcpcd[4923]: eth0: sendmsg: Cannot assign requested address
Mar 26 22:23:12 localhost pulseaudio[5353]: [pulseaudio] pid.c: Daemon already running.
Mar 26 22:41:03 localhost kernel: [    9.562012] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 22:41:04 localhost /usr/sbin/crond[558]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 22:41:08 localhost dhcpcd[620]: eth0: sendmsg: Cannot assign requested address
Mar 26 22:41:26 localhost kernel: [   37.633630] [fglrx:IRQMGR_callback_hifreq_interrupt] *ERROR* irqSourceID = 0xa0000001 is unknown
Mar 26 22:41:34 localhost pulseaudio[975]: [pulseaudio] pid.c: Daemon already running.
Mar 26 22:43:58 localhost dhcpcd[1721]: eth0: sendmsg: Cannot assign requested address
Mar 26 22:47:14 localhost dhcpcd[2038]: wlan0: sendmsg: Cannot assign requested address
Mar 26 22:47:44 localhost dhcpcd[2038]: timed out
Mar 26 22:47:48 localhost dhcpcd[2097]: wlan0: sendmsg: Cannot assign requested address
Mar 26 22:48:01 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:48:01 localhost NetworkManager[609]: <error> [1332773281.764934] [nm-device.c:1692] dhcp6_start(): (wlan0): failed to add IPv6 multicast route: Object not found
Mar 26 22:48:06 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:48:33 localhost NetworkManager[609]: real_stop: assertion `priv->pid > 0' failed
Mar 26 22:48:50 localhost dhcpcd[2170]: wlan0: sendmsg: Cannot assign requested address
Mar 26 22:49:29 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:49:33 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:50:26 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:51:55 localhost dhcpcd[2170]: received RA for unexpected interface from fe80::219:7ff:fe41:7800
Mar 26 22:52:15 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:52:20 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:52:24 localhost pulseaudio[2691]: [pulseaudio] pid.c: Daemon already running.
Mar 26 22:52:25 localhost pulseaudio[911]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 26 22:52:25 localhost pulseaudio[911]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 26 22:52:37 localhost dhcpcd[2170]: received RA for unexpected interface from fe80::219:7ff:fe41:7800
Mar 26 22:53:10 localhost dhcpcd[2170]: received RA for unexpected interface from fe80::219:7ff:fe41:7800
Mar 26 22:53:14 localhost dhcpcd[2170]: received RA for unexpected interface from fe80::219:7ff:fe41:7800
Mar 26 22:53:41 localhost dhcpcd[2994]: wlan0: sendmsg: Cannot assign requested address
Mar 26 22:53:49 localhost dhcpcd[1721]: received RA for unexpected interface from fe80::5470:8af3:51c9:384c
Mar 26 22:53:49 localhost NetworkManager[609]: <error> [1332773629.763717] [nm-device.c:1692] dhcp6_start(): (wlan0): failed to add IPv6 multicast route: Object not found
Mar 26 22:53:53 localhost NetworkManager[609]: real_stop: assertion `priv->pid > 0' failed
Mar 26 22:55:12 localhost kernel: [    6.439419] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 22:55:13 localhost /usr/sbin/crond[548]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 22:55:18 localhost dhcpcd[613]: eth0: sendmsg: Cannot assign requested address
Mar 26 22:55:54 localhost pulseaudio[996]: [pulseaudio] pid.c: Daemon already running.
Mar 26 23:34:26 localhost kernel: [    6.151450] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 26 23:34:27 localhost /usr/sbin/crond[540]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 26 23:34:31 localhost dhcpcd[616]: eth0: sendmsg: Cannot assign requested address
Mar 26 23:36:42 localhost pulseaudio[1065]: [pulseaudio] pid.c: Daemon already running.
Mar 27 08:44:12 localhost dhcpcd[4110]: eth0: sendmsg: Cannot assign requested address
Mar 27 08:44:17 localhost gnome-screensaver-dialog: gkr-pam: the password for the login keyring was invalid.
Mar 27 08:54:37 localhost kernel: [    7.204100] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 27 08:54:38 localhost /usr/sbin/crond[546]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 27 08:54:42 localhost dhcpcd[611]: eth0: sendmsg: Cannot assign requested address
Mar 27 08:55:09 localhost pulseaudio[977]: [pulseaudio] pid.c: Daemon already running.
Mar 27 22:17:26 localhost kernel: [    8.031225] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 27 22:17:27 localhost /usr/sbin/crond[537]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 27 22:17:31 localhost dhcpcd[602]: eth0: sendmsg: Cannot assign requested address
Mar 27 22:17:58 localhost pulseaudio[968]: [pulseaudio] pid.c: Daemon already running.
Mar 27 22:50:08 localhost pulseaudio[5594]: [pulseaudio] pid.c: Daemon already running.
Mar 27 22:50:08 localhost pulseaudio[889]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 27 22:50:08 localhost pulseaudio[889]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 27 22:53:59 localhost pulseaudio[6323]: [pulseaudio] pid.c: Daemon already running.
Mar 27 22:53:59 localhost pulseaudio[889]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 27 22:53:59 localhost pulseaudio[889]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 27 23:00:29 localhost kernel: [    6.381131] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 27 23:00:31 localhost /usr/sbin/crond[549]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 27 23:00:35 localhost dhcpcd[614]: eth0: sendmsg: Cannot assign requested address
Mar 27 23:01:02 localhost pulseaudio[974]: [pulseaudio] pid.c: Daemon already running.
Mar 27 23:10:06 localhost pulseaudio[1902]: [pulseaudio] pid.c: Daemon already running.
Mar 27 23:10:06 localhost pulseaudio[902]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 27 23:10:06 localhost pulseaudio[902]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 27 23:10:59 localhost pulseaudio[2333]: [pulseaudio] pid.c: Daemon already running.
Mar 27 23:10:59 localhost pulseaudio[902]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 27 23:10:59 localhost pulseaudio[902]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 27 23:46:33 localhost sudo: pam_unix(sudo:auth): conversation failed
Mar 28 08:22:54 localhost kernel: [    7.223435] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 28 08:22:55 localhost /usr/sbin/crond[598]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 28 08:23:00 localhost dhcpcd[1144]: eth0: sendmsg: Cannot assign requested address
Mar 28 08:23:31 localhost pulseaudio[1512]: [pulseaudio] pid.c: Daemon already running.
Mar 28 08:44:09 localhost pulseaudio[8533]: [pulseaudio] pid.c: Daemon already running.
Mar 28 08:44:09 localhost pulseaudio[1435]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 28 08:44:09 localhost pulseaudio[1435]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 28 08:45:26 localhost kernel: [    6.549959] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 28 08:45:27 localhost /usr/sbin/crond[591]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 28 08:45:33 localhost dhcpcd[1171]: eth0: sendmsg: Cannot assign requested address
Mar 28 08:46:00 localhost pulseaudio[1541]: [pulseaudio] pid.c: Daemon already running.
Mar 28 22:21:00 localhost dhcpcd[25993]: eth0: sendmsg: Cannot assign requested address
Mar 28 22:27:13 localhost kernel: [    6.375926] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 28 22:27:14 localhost /usr/sbin/crond[584]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 28 22:27:20 localhost dhcpcd[1128]: eth0: sendmsg: Cannot assign requested address
Mar 28 22:27:48 localhost pulseaudio[1485]: [pulseaudio] pid.c: Daemon already running.
Mar 28 23:41:27 localhost pulseaudio[12486]: [pulseaudio] pid.c: Daemon already running.
Mar 28 23:41:27 localhost pulseaudio[1420]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 28 23:41:27 localhost pulseaudio[1420]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 28 23:53:39 localhost kernel: [ 5186.310651] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 28 23:53:39 localhost kernel: [ 5186.310656] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 28 23:53:39 localhost kernel: [ 5186.312905] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 28 23:53:39 localhost kernel: [ 5186.312908] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 28 23:53:39 localhost kernel: [ 5186.628299] end_request: I/O error, dev sdb, sector 3862400
Mar 28 23:53:39 localhost kernel: [ 5186.628304] Buffer I/O error on device sdb, logical block 482800
Mar 28 23:53:39 localhost kernel: [ 5186.630914] end_request: I/O error, dev sdb, sector 3862512
Mar 28 23:53:39 localhost kernel: [ 5186.630917] Buffer I/O error on device sdb, logical block 482814
Mar 28 23:53:39 localhost kernel: [ 5186.632678] end_request: I/O error, dev sdb, sector 3862512
Mar 28 23:53:39 localhost kernel: [ 5186.632682] Buffer I/O error on device sdb, logical block 482814
Mar 28 23:53:39 localhost kernel: [ 5186.636145] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.636150] Buffer I/O error on device sdb, logical block 482815
Mar 28 23:53:39 localhost kernel: [ 5186.803954] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.803960] Buffer I/O error on device sdb, logical block 482815
Mar 28 23:53:39 localhost kernel: [ 5186.805178] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.805181] Buffer I/O error on device sdb, logical block 482815
Mar 28 23:53:39 localhost kernel: [ 5186.806312] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.806317] Buffer I/O error on device sdb, logical block 482815
Mar 28 23:53:39 localhost kernel: [ 5186.807549] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.807552] Buffer I/O error on device sdb, logical block 482815
Mar 28 23:53:39 localhost kernel: [ 5186.808554] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.808557] Buffer I/O error on device sdb, logical block 482815
Mar 28 23:53:39 localhost kernel: [ 5186.809545] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.811432] end_request: I/O error, dev sdb, sector 3862464
Mar 28 23:53:39 localhost kernel: [ 5186.813197] end_request: I/O error, dev sdb, sector 3862512
Mar 28 23:53:39 localhost kernel: [ 5186.814424] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.815923] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.817038] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:39 localhost kernel: [ 5186.969732] end_request: I/O error, dev sdb, sector 3862400
Mar 28 23:53:39 localhost kernel: [ 5186.971489] end_request: I/O error, dev sdb, sector 3862512
Mar 28 23:53:39 localhost kernel: [ 5186.973618] end_request: I/O error, dev sdb, sector 3862512
Mar 28 23:53:39 localhost kernel: [ 5186.979003] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.146513] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.147383] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.148252] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.150260] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.151175] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.152117] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.152989] end_request: I/O error, dev sdb, sector 3862521
Mar 28 23:53:40 localhost kernel: [ 5187.153856] end_request: I/O error, dev sdb, sector 3862522
Mar 28 23:53:40 localhost kernel: [ 5187.154737] end_request: I/O error, dev sdb, sector 3862464
Mar 28 23:53:40 localhost kernel: [ 5187.155610] end_request: I/O error, dev sdb, sector 3862465
Mar 28 23:53:40 localhost kernel: [ 5187.156747] end_request: I/O error, dev sdb, sector 3862466
Mar 28 23:53:40 localhost kernel: [ 5187.157614] end_request: I/O error, dev sdb, sector 3862512
Mar 28 23:53:40 localhost kernel: [ 5187.158632] end_request: I/O error, dev sdb, sector 3862513
Mar 28 23:53:40 localhost kernel: [ 5187.159758] end_request: I/O error, dev sdb, sector 3862514
Mar 28 23:53:40 localhost kernel: [ 5187.166967] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.167839] end_request: I/O error, dev sdb, sector 3862521
Mar 28 23:53:40 localhost kernel: [ 5187.168724] end_request: I/O error, dev sdb, sector 3862522
Mar 28 23:53:40 localhost kernel: [ 5187.169594] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.170452] end_request: I/O error, dev sdb, sector 3862521
Mar 28 23:53:40 localhost kernel: [ 5187.171332] end_request: I/O error, dev sdb, sector 3862522
Mar 28 23:53:40 localhost kernel: [ 5187.172214] end_request: I/O error, dev sdb, sector 3862520
Mar 28 23:53:40 localhost kernel: [ 5187.173318] end_request: I/O error, dev sdb, sector 3862521
Mar 28 23:53:40 localhost kernel: [ 5187.174209] end_request: I/O error, dev sdb, sector 3862522
Mar 29 00:31:52 localhost sudo: pam_unix(sudo:auth): conversation failed
Mar 29 00:46:27 localhost kernel: [ 8348.078568] sd 7:0:0:0: [sdb] No Caching mode page present
Mar 29 00:46:27 localhost kernel: [ 8348.078585] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 00:46:27 localhost kernel: [ 8348.081191] sd 7:0:0:0: [sdb] No Caching mode page present
Mar 29 00:46:27 localhost kernel: [ 8348.081194] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 00:46:27 localhost kernel: [ 8348.083949] sd 7:0:0:0: [sdb] No Caching mode page present
Mar 29 00:46:27 localhost kernel: [ 8348.083951] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 00:47:32 localhost pulseaudio[24117]: [pulseaudio] client-conf-x11.c: xcb_connection_has_error() returned true
Mar 29 00:47:33 localhost pulseaudio[24120]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NoServer: Failed to connect to socket /tmp/dbus-K7E9uDgTpM: Connection refused
Mar 29 00:47:33 localhost pulseaudio[24120]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument: ""): initialization failed.
Mar 29 00:47:33 localhost pulseaudio[24120]: [pulseaudio] main.c: Module load failed.
Mar 29 12:27:54 localhost kernel: [    8.599665] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 12:27:55 localhost /usr/sbin/crond[589]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 12:28:01 localhost dhcpcd[1131]: eth0: sendmsg: Cannot assign requested address
Mar 29 12:28:31 localhost pulseaudio[1522]: [pulseaudio] pid.c: Daemon already running.
Mar 29 12:46:10 localhost kernel: [    6.628361] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 12:46:11 localhost /usr/sbin/crond[544]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 12:46:15 localhost dhcpcd[609]: eth0: sendmsg: Cannot assign requested address
Mar 29 12:46:57 localhost pulseaudio[968]: [pulseaudio] pid.c: Daemon already running.
Mar 29 13:06:37 localhost kernel: [    6.312144] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 13:06:38 localhost /usr/sbin/crond[582]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 13:06:45 localhost dhcpcd[1129]: eth0: sendmsg: Cannot assign requested address
Mar 29 13:07:14 localhost pulseaudio[1528]: [pulseaudio] pid.c: Daemon already running.
Mar 29 22:01:57 localhost dhcpcd[6853]: eth0: sendmsg: Cannot assign requested address
Mar 29 22:11:50 localhost kernel: [    6.496941] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 22:11:51 localhost /usr/sbin/crond[531]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 22:11:55 localhost dhcpcd[586]: eth0: sendmsg: Cannot assign requested address
Mar 29 22:13:15 localhost kernel: [    7.937401] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 22:13:16 localhost /usr/sbin/crond[553]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 22:13:19 localhost dhcpcd[606]: eth0: sendmsg: Cannot assign requested address
Mar 29 22:13:42 localhost pulseaudio[923]: [pulseaudio] pid.c: Daemon already running.
Mar 29 22:24:07 localhost dhcpcd[1838]: eth0: sendmsg: Cannot assign requested address
Mar 29 22:53:20 localhost pulseaudio[3389]: [pulseaudio] pid.c: Daemon already running.
Mar 29 23:17:18 localhost kernel: [    6.296290] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 23:17:20 localhost /usr/sbin/crond[564]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 23:17:23 localhost dhcpcd[619]: eth0: sendmsg: Cannot assign requested address
Mar 29 23:18:28 localhost pulseaudio[959]: [pulseaudio] pid.c: Daemon already running.
Mar 29 23:38:24 localhost dhcpcd[2630]: eth0: sendmsg: Cannot assign requested address
Mar 29 23:57:02 localhost pulseaudio[3675]: [pulseaudio] pid.c: Daemon already running.
Mar 29 23:57:02 localhost pulseaudio[3677]: [pulseaudio] pid.c: Daemon already running.
Mar 29 23:57:02 localhost pulseaudio[3679]: [pulseaudio] pid.c: Daemon already running.
Mar 29 23:58:35 localhost kernel: [   11.337829] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 29 23:58:36 localhost /usr/sbin/crond[549]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 29 23:58:40 localhost dhcpcd[604]: eth0: sendmsg: Cannot assign requested address
Mar 29 23:59:06 localhost pulseaudio[1007]: [pulseaudio] pid.c: Daemon already running.
Mar 30 00:02:04 localhost dhcpcd[1748]: eth0: sendmsg: Cannot assign requested address
Mar 30 09:45:18 localhost kernel: [    7.432937] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 30 09:45:19 localhost /usr/sbin/crond[585]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 30 09:45:22 localhost dhcpcd[649]: eth0: sendmsg: Cannot assign requested address
Mar 30 09:45:46 localhost pulseaudio[998]: [pulseaudio] pid.c: Daemon already running.
Mar 30 10:05:55 localhost pulseaudio[2941]: [pulseaudio] pid.c: Daemon already running.
Mar 30 10:05:55 localhost pulseaudio[948]: [pulseaudio] x11wrap.c: XOpenDisplay() failed
Mar 30 10:05:55 localhost pulseaudio[948]: [pulseaudio] module.c: Failed to load module "module-x11-publish" (argument: "display=:1"): initialization failed.
Mar 30 10:07:24 localhost kernel: [    6.746443] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 30 10:07:25 localhost /usr/sbin/crond[535]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 30 10:07:29 localhost dhcpcd[597]: eth0: sendmsg: Cannot assign requested address
Mar 30 10:08:01 localhost pulseaudio[1047]: [pulseaudio] pid.c: Daemon already running.
Mar 30 10:42:04 localhost dhcpcd[3247]: eth0: sendmsg: Cannot assign requested address
Mar 30 10:50:28 localhost pulseaudio[4149]: [pulseaudio] pid.c: Daemon already running.
Mar 30 10:53:19 localhost kernel: [    6.401583] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 30 10:53:20 localhost /usr/sbin/crond[557]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 30 10:53:24 localhost dhcpcd[624]: eth0: sendmsg: Cannot assign requested address
Mar 30 10:53:55 localhost pulseaudio[1126]: [pulseaudio] pid.c: Daemon already running.
Mar 30 22:13:34 localhost kernel: [    6.513180] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Mar 30 22:13:35 localhost /usr/sbin/crond[546]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Mar 30 22:13:40 localhost dhcpcd[613]: eth0: sendmsg: Cannot assign requested address
Mar 30 22:14:06 localhost pulseaudio[965]: [pulseaudio] pid.c: Daemon already running.

Xorg.0.log :

[    13.227] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[    13.227] X Protocol Version 11, Revision 0
[    13.227] Build Operating System: Linux 3.2.2-1-ARCH i686 
[    13.228] Current Operating System: Linux halo 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 08:09:57 UTC 2012 i686
[    13.228] Kernel command line: root=/dev/sda6 ro nomodeset
[    13.228] Build Date: 29 January 2012  03:41:53PM
[    13.228]  
[    13.228] Current version of pixman: 0.24.4
[    13.228] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.228] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.228] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 30 22:13:38 2012
[    13.253] (==) Using config file: "/etc/X11/xorg.conf"
[    13.253] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.281] (==) ServerLayout "aticonfig Layout"
[    13.281] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    13.281] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    13.282] (**) |   |-->Device "aticonfig-Device[0]-0"
[    13.283] (==) Automatically adding devices
[    13.283] (==) Automatically enabling devices
[    13.296] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[    13.296] 	Entry deleted from font path.
[    13.296] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[    13.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    13.314] 	Entry deleted from font path.
[    13.328] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    13.328] 	Entry deleted from font path.
[    13.328] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    13.338] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    13.338] 	Entry deleted from font path.
[    13.338] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    13.338] (==) FontPath set to:
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    13.338] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.338] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.338] (II) Loader magic: 0x8228580
[    13.338] (II) Module ABI versions:
[    13.338] 	X.Org ANSI C Emulation: 0.4
[    13.338] 	X.Org Video Driver: 11.0
[    13.338] 	X.Org XInput driver : 13.0
[    13.338] 	X.Org Server Extension : 6.0
[    13.340] (--) PCI:*(0:1:0:0) 1002:68c1:17aa:3928 rev 0, Mem @ 0xd0000000/268435456, 0xf8400000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    13.341] (II) Open ACPI successful (/var/run/acpid.socket)
[    13.341] (II) "extmod" will be loaded by default.
[    13.341] (II) "dbe" will be loaded by default.
[    13.341] (II) "glx" will be loaded by default.
[    13.341] (II) "record" will be loaded by default.
[    13.341] (II) "dri" will be loaded by default.
[    13.341] (II) "dri2" will be loaded by default.
[    13.341] (II) LoadModule: "extmod"
[    13.362] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    13.366] (II) Module extmod: vendor="X.Org Foundation"
[    13.366] 	compiled for 1.11.4, module version = 1.0.0
[    13.366] 	Module class: X.Org Server Extension
[    13.366] 	ABI class: X.Org Server Extension, version 6.0
[    13.366] (II) Loading extension MIT-SCREEN-SAVER
[    13.366] (II) Loading extension XFree86-VidModeExtension
[    13.366] (II) Loading extension XFree86-DGA
[    13.367] (II) Loading extension DPMS
[    13.367] (II) Loading extension XVideo
[    13.367] (II) Loading extension XVideo-MotionCompensation
[    13.367] (II) Loading extension X-Resource
[    13.367] (II) LoadModule: "dbe"
[    13.367] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    13.374] (II) Module dbe: vendor="X.Org Foundation"
[    13.374] 	compiled for 1.11.4, module version = 1.0.0
[    13.374] 	Module class: X.Org Server Extension
[    13.374] 	ABI class: X.Org Server Extension, version 6.0
[    13.374] (II) Loading extension DOUBLE-BUFFER
[    13.374] (II) LoadModule: "glx"
[    13.377] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.400] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    13.400] 	compiled for 6.9.0, module version = 1.0.0
[    13.400] (II) Loading extension GLX
[    13.400] (II) LoadModule: "record"
[    13.400] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    13.400] (II) Module record: vendor="X.Org Foundation"
[    13.400] 	compiled for 1.11.4, module version = 1.13.0
[    13.401] 	Module class: X.Org Server Extension
[    13.401] 	ABI class: X.Org Server Extension, version 6.0
[    13.401] (II) Loading extension RECORD
[    13.401] (II) LoadModule: "dri"
[    13.401] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    13.427] (II) Module dri: vendor="X.Org Foundation"
[    13.427] 	compiled for 1.11.4, module version = 1.0.0
[    13.427] 	ABI class: X.Org Server Extension, version 6.0
[    13.427] (II) Loading extension XFree86-DRI
[    13.427] (II) LoadModule: "dri2"
[    13.427] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    13.440] (II) Module dri2: vendor="X.Org Foundation"
[    13.440] 	compiled for 1.11.4, module version = 1.2.0
[    13.440] 	ABI class: X.Org Server Extension, version 6.0
[    13.440] (II) Loading extension DRI2
[    13.440] (II) LoadModule: "fglrx"
[    13.461] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    13.621] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    13.628] 	compiled for 1.4.99.906, module version = 8.95.3
[    13.628] 	Module class: X.Org Video Driver
[    13.629] (II) Loading sub module "fglrxdrm"
[    13.629] (II) LoadModule: "fglrxdrm"
[    13.629] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    13.644] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    13.644] 	compiled for 1.4.99.906, module version = 8.95.3
[    13.651] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[    13.651] (II) ATI Proprietary Linux Driver Release Identifier: 8.95                                 
[    13.651] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:04:52
[    13.651] (++) using VT number 7

[    13.657] (WW) Falling back to old probe method for fglrx
[    13.863] (II) Loading PCS database from /etc/ati/amdpcsdb
[    13.870] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[    13.870] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    13.871] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    13.871] (II) AMD Video driver is signed
[    13.871] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    13.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    13.871] (II) fglrx(0): pEnt->device->identifier=0x928fae0
[    13.871] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    13.871] (II) Loading sub module "vgahw"
[    13.872] (II) LoadModule: "vgahw"
[    13.884] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    13.888] (II) Module vgahw: vendor="X.Org Foundation"
[    13.888] 	compiled for 1.11.4, module version = 0.1.0
[    13.888] 	ABI class: X.Org Video Driver, version 11.0
[    13.888] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    13.888] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    13.888] (==) fglrx(0): Default visual is TrueColor
[    13.888] (**) fglrx(0): Option "DPMS" "true"
[    13.888] (==) fglrx(0): RGB weight 888
[    13.888] (II) fglrx(0): Using 8 bits per RGB 
[    13.888] (==) fglrx(0): Buffer Tiling is ON
[    13.889] (II) Loading sub module "fglrxdrm"
[    13.889] (II) LoadModule: "fglrxdrm"
[    13.889] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    13.889] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    13.889] 	compiled for 1.4.99.906, module version = 8.95.3
[    13.891] ukiDynamicMajor: found major device number 249
[    13.891] ukiDynamicMajor: found major device number 249
[    13.891] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    13.891] ukiOpenDevice: node name is /dev/ati/card0
[    13.891] ukiOpenDevice: open result is 12, (OK)
[    13.891] ukiOpenByBusid: ukiOpenMinor returns 12
[    13.891] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    13.891] (**) fglrx(0): NoAccel = NO
[    13.891] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    13.892] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[    13.892] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3928)
[    13.892] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    13.892] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    13.892] (--) fglrx(0): MMIO registers at 0xf8400000
[    13.892] (--) fglrx(0): I/O port at 0x00002000
[    13.892] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    13.936] (II) fglrx(0): AC Adapter is used
[    13.956] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    14.257] (II) Loading sub module "vbe"
[    14.257] (II) LoadModule: "vbe"
[    14.257] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    14.272] (II) Module vbe: vendor="X.Org Foundation"
[    14.272] 	compiled for 1.11.4, module version = 1.1.0
[    14.272] 	ABI class: X.Org Video Driver, version 11.0
[    14.272] (II) fglrx(0): VESA BIOS detected
[    14.272] (II) fglrx(0): VbeVersion is 768, OemStringPtr is 0xc00001fc,
	OemVendorNamePtr is 0xc0000124, OemProductNamePtr is 0xc00000b4,
	OemProductRevPtr is 0xc0004dec
[    14.272] (II) fglrx(0): VESA VBE Version 3.0
[    14.272] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    14.273] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    14.273] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    14.273] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    14.273] (II) fglrx(0): VESA VBE OEM Product: MADISON
[    14.273] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    14.304] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    14.304] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    14.304] (II) fglrx(0): PCIE card detected
[    14.304] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    14.304] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    14.317] (II) fglrx(0): Using adapter: 1:0.0.
[    14.354] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    14.669] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[    14.669] (II) fglrx(0): RandR 1.2 support is enabled!
[    14.669] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    14.669] (==) fglrx(0): Center Mode is disabled 
[    14.669] (II) Loading sub module "fb"
[    14.669] (II) LoadModule: "fb"
[    14.669] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.684] (II) Module fb: vendor="X.Org Foundation"
[    14.684] 	compiled for 1.11.4, module version = 1.0.0
[    14.684] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.684] (II) Loading sub module "ddc"
[    14.684] (II) LoadModule: "ddc"
[    14.684] (II) Module "ddc" already built-in
[    14.868] (II) fglrx(0): Finished Initialize PPLIB!
[    14.870] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    14.870] (II) fglrx(0): Output DFP1 has no monitor section
[    14.870] (II) fglrx(0): Output CRT1 has no monitor section
[    14.870] (II) Loading sub module "ddc"
[    14.870] (II) LoadModule: "ddc"
[    14.870] (II) Module "ddc" already built-in
[    14.870] (II) fglrx(0): Connected Display0: LVDS
[    14.871] (II) fglrx(0): Display0 EDID data ---------------------------
[    14.871] (II) fglrx(0): Manufacturer: SEC  Model: 3049  Serial#: 1
[    14.871] (II) fglrx(0): Year: 2009  Week: 0
[    14.871] (II) fglrx(0): EDID Version: 1.3
[    14.871] (II) fglrx(0): Digital Display Input
[    14.871] (II) fglrx(0): Max Image Size [cm]: horiz.: 32  vert.: 19
[    14.871] (II) fglrx(0): Gamma: 2.20
[    14.871] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    14.871] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.871] (II) fglrx(0): First detailed timing is preferred mode
[    14.871] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.871] (II) fglrx(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    14.871] (II) fglrx(0): Manufacturer's mask: 0
[    14.871] (II) fglrx(0): Supported detailed timing:
[    14.871] (II) fglrx(0): clock: 75.1 MHz   Image Size:  309 x 174 mm
[    14.871] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[    14.871] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[    14.871] (II) fglrx(0): Supported detailed timing:
[    14.871] (II) fglrx(0): clock: 50.0 MHz   Image Size:  309 x 174 mm
[    14.871] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[    14.871] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[    14.871] (II) fglrx(0):  SAMSUNG
[    14.871] (II) fglrx(0):  140AT11-L01
[    14.871] (II) fglrx(0): EDID (in hex):
[    14.871] (II) fglrx(0): 	00ffffffffffff004ca3493001000000
[    14.871] (II) fglrx(0): 	0013010380201378ea87e594574f8c27
[    14.871] (II) fglrx(0): 	22505400000001010101010101010101
[    14.871] (II) fglrx(0): 	010101010101541d56ce50001c303020
[    14.871] (II) fglrx(0): 	250035ae100000198d1356ce50001c30
[    14.871] (II) fglrx(0): 	3020250035ae10000019000000fe0053
[    14.871] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    14.871] (II) fglrx(0): 	00313430415431312d4c30310a20005b
[    14.871] (II) fglrx(0): End of Display0 EDID data --------------------
[    14.872] (II) fglrx(0): EDID for output LVDS
[    14.872] (II) fglrx(0): Manufacturer: SEC  Model: 3049  Serial#: 1
[    14.872] (II) fglrx(0): Year: 2009  Week: 0
[    14.872] (II) fglrx(0): EDID Version: 1.3
[    14.872] (II) fglrx(0): Digital Display Input
[    14.872] (II) fglrx(0): Max Image Size [cm]: horiz.: 32  vert.: 19
[    14.872] (II) fglrx(0): Gamma: 2.20
[    14.872] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    14.872] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.872] (II) fglrx(0): First detailed timing is preferred mode
[    14.872] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.872] (II) fglrx(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    14.872] (II) fglrx(0): Manufacturer's mask: 0
[    14.873] (II) fglrx(0): Supported detailed timing:
[    14.873] (II) fglrx(0): clock: 75.1 MHz   Image Size:  309 x 174 mm
[    14.873] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[    14.873] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[    14.873] (II) fglrx(0): Supported detailed timing:
[    14.873] (II) fglrx(0): clock: 50.0 MHz   Image Size:  309 x 174 mm
[    14.873] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[    14.873] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[    14.873] (II) fglrx(0):  SAMSUNG
[    14.873] (II) fglrx(0):  140AT11-L01
[    14.873] (II) fglrx(0): EDID (in hex):
[    14.873] (II) fglrx(0): 	00ffffffffffff004ca3493001000000
[    14.873] (II) fglrx(0): 	0013010380201378ea87e594574f8c27
[    14.873] (II) fglrx(0): 	22505400000001010101010101010101
[    14.873] (II) fglrx(0): 	010101010101541d56ce50001c303020
[    14.873] (II) fglrx(0): 	250035ae100000198d1356ce50001c30
[    14.873] (II) fglrx(0): 	3020250035ae10000019000000fe0053
[    14.873] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    14.873] (II) fglrx(0): 	00313430415431312d4c30310a20005b
[    14.873] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    14.873] (II) fglrx(0): Printing DDC gathered Modelines:
[    14.873] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Printing probed modes for output LVDS
[    14.873] (II) fglrx(0): Modeline "1366x768"x60.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1366x768"x40.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1360x768"x60.0   75.08  1360 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1360x768"x40.0   50.05  1360 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1280x768"x60.0   75.08  1280 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1280x768"x40.0   50.05  1280 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1280x720"x60.0   75.08  1280 1414 1446 1572  720 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1280x720"x40.0   50.05  1280 1414 1446 1572  720 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1024x768"x60.0   75.08  1024 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1024x768"x40.0   50.05  1024 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1024x600"x60.0   75.08  1024 1414 1446 1572  600 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "1024x600"x40.0   50.05  1024 1414 1446 1572  600 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "800x600"x60.0   75.08  800 1414 1446 1572  600 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "800x600"x40.0   50.05  800 1414 1446 1572  600 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "800x480"x60.0   75.08  800 1414 1446 1572  480 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "800x480"x40.0   50.05  800 1414 1446 1572  480 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): Modeline "640x480"x60.0   75.08  640 1414 1446 1572  480 770 775 796 -hsync -vsync (47.8 kHz)
[    14.873] (II) fglrx(0): Modeline "640x480"x40.0   50.05  640 1414 1446 1572  480 770 775 796 -hsync -vsync (31.8 kHz)
[    14.873] (II) fglrx(0): EDID for output DFP1
[    14.873] (II) fglrx(0): EDID for output CRT1
[    14.874] (II) fglrx(0): Output LVDS connected
[    14.874] (II) fglrx(0): Output DFP1 disconnected
[    14.874] (II) fglrx(0): Output CRT1 disconnected
[    14.874] (II) fglrx(0): Using exact sizes for initial modes
[    14.874] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    14.874] (II) fglrx(0): Display dimensions: (320, 190) mm
[    14.874] (II) fglrx(0): DPI set to (108, 102)
[    14.874] (II) fglrx(0): Eyefinity capable adapter detected.
[    14.874] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 6 configurable heads and 1 displays connected.
[    14.874] (==) fglrx(0):  PseudoColor visuals disabled
[    14.874] (II) Loading sub module "ramdac"
[    14.874] (II) LoadModule: "ramdac"
[    14.874] (II) Module "ramdac" already built-in
[    14.874] (==) fglrx(0): NoDRI = NO
[    14.874] (==) fglrx(0): Capabilities: 0x00000000
[    14.874] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    14.874] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    14.874] (==) fglrx(0): UseFastTLS=0
[    14.874] (==) fglrx(0): BlockSignalsOnLock=1
[    14.874] (--) Depth 24 pixmap format is 32 bpp
[    14.874] (II) Loading extension ATIFGLRXDRI
[    14.874] (II) fglrx(0): doing swlDriScreenInit
[    14.874] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    14.874] ukiDynamicMajor: found major device number 249
[    14.874] ukiDynamicMajor: found major device number 249
[    14.875] ukiDynamicMajor: found major device number 249
[    14.875] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    14.875] ukiOpenDevice: node name is /dev/ati/card0
[    14.875] ukiOpenDevice: open result is 17, (OK)
[    14.875] ukiOpenByBusid: ukiOpenMinor returns 17
[    14.875] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    14.875] (II) fglrx(0): [uki] DRM interface version 1.0
[    14.875] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    14.875] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    14.875] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7219000
[    14.875] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    14.875] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    14.875] (II) fglrx(0): swlDriScreenInit done
[    14.875] (II) fglrx(0): Kernel Module Version Information:
[    14.875] (II) fglrx(0):     Name: fglrx
[    14.875] (II) fglrx(0):     Version: 8.95.3
[    14.875] (II) fglrx(0):     Date: Feb 14 2012
[    14.875] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    14.875] (II) fglrx(0): Kernel Module version matches driver.
[    14.875] (II) fglrx(0): Kernel Module Build Time Information:
[    14.875] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.9-1-ARCH
[    14.875] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    14.875] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    14.875] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    14.875] (II) fglrx(0): [uki] register handle = 0x00004000
[    14.916] (II) fglrx(0): DRI initialization successfull
[    14.931] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    14.948] (==) fglrx(0): Backing store disabled
[    14.948] (II) Loading extension FGLRXEXTENSION
[    14.948] (**) fglrx(0): DPMS enabled
[    14.949] (II) fglrx(0): Initialized in-driver Xinerama extension
[    14.949] (**) fglrx(0): Textured Video is enabled.
[    14.949] (II) LoadModule: "glesx"
[    14.949] (II) Loading /usr/lib/xorg/modules/glesx.so
[    15.060] (II) Module glesx: vendor="X.Org Foundation"
[    15.060] 	compiled for 1.4.99.906, module version = 1.0.0
[    15.060] (II) Loading extension GLESX
[    15.060] (II) fglrx(0): GLESX enableFlags = 592
[    15.060] (II) fglrx(0): GLESX is enabled
[    15.060] (II) LoadModule: "amdxmm"
[    15.060] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    15.071] (II) Module amdxmm: vendor="X.Org Foundation"
[    15.071] 	compiled for 1.4.99.906, module version = 2.0.0
[    15.081] (II) Loading extension AMDXVOPL
[    15.082] (II) Loading extension AMDXVBA
[    15.094] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    15.098] (II) fglrx(0): Enable composite support successfully
[    15.098] (WW) fglrx(0): Option "VendorName" is not used
[    15.098] (WW) fglrx(0): Option "ModelName" is not used
[    15.098] (II) fglrx(0): X context handle = 0x1
[    15.098] (II) fglrx(0): [DRI] installation complete
[    15.098] (==) fglrx(0): Silken mouse enabled
[    15.099] (==) fglrx(0): Using HW cursor of display infrastructure!
[    15.099] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    15.099] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    15.099] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    16.470] (--) RandR disabled
[    16.471] (II) Initializing built-in extension Generic Event Extension
[    16.471] (II) Initializing built-in extension SHAPE
[    16.471] (II) Initializing built-in extension MIT-SHM
[    16.471] (II) Initializing built-in extension XInputExtension
[    16.471] (II) Initializing built-in extension XTEST
[    16.471] (II) Initializing built-in extension BIG-REQUESTS
[    16.471] (II) Initializing built-in extension SYNC
[    16.471] (II) Initializing built-in extension XKEYBOARD
[    16.471] (II) Initializing built-in extension XC-MISC
[    16.471] (II) Initializing built-in extension SECURITY
[    16.471] (II) Initializing built-in extension XINERAMA
[    16.471] (II) Initializing built-in extension XFIXES
[    16.471] (II) Initializing built-in extension RENDER
[    16.471] (II) Initializing built-in extension RANDR
[    16.471] (II) Initializing built-in extension COMPOSITE
[    16.471] (II) Initializing built-in extension DAMAGE
[    16.475] ukiDynamicMajor: found major device number 249
[    16.475] ukiDynamicMajor: found major device number 249
[    16.475] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.475] ukiOpenDevice: node name is /dev/ati/card0
[    16.475] ukiOpenDevice: open result is 18, (OK)
[    16.475] ukiOpenByBusid: ukiOpenMinor returns 18
[    16.475] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    17.223] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    17.316] (II) fglrx(0): Enable the clock gating!
[    17.317] (II) fglrx(0): Setting screen physical size to 361 x 203
[    17.509] (II) XKB: Reusing cached keymap
[    17.512] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    17.512] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.512] (II) LoadModule: "evdev"
[    17.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.525] (II) Module evdev: vendor="X.Org Foundation"
[    17.525] 	compiled for 1.10.99.902, module version = 2.6.0
[    17.525] 	Module class: X.Org XInput Driver
[    17.525] 	ABI class: X.Org XInput driver, version 13.0
[    17.525] (II) Using input driver 'evdev' for 'Power Button'
[    17.525] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.525] 	Option "XkbRules" "evdev"
[    17.525] 	Option "XkbModel" "evdev"
[    17.525] 	Option "XkbLayout" "us"
[    17.525] 	Option "_source" "server/udev"
[    17.525] 	Option "name" "Power Button"
[    17.525] 	Option "path" "/dev/input/event5"
[    17.525] 	Option "device" "/dev/input/event5"
[    17.525] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    17.525] 	Option "driver" "evdev"
[    17.526] (**) Power Button: always reports core events
[    17.526] (**) Power Button: Device: "/dev/input/event5"
[    17.526] (--) Power Button: Found keys
[    17.526] (II) Power Button: Configuring as keyboard
[    17.526] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    17.526] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.526] (**) Option "xkb_rules" "evdev"
[    17.526] (**) Option "xkb_model" "evdev"
[    17.526] (**) Option "xkb_layout" "us"
[    17.574] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    17.574] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.574] (II) Using input driver 'evdev' for 'Video Bus'
[    17.574] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.574] 	Option "XkbRules" "evdev"
[    17.574] 	Option "XkbModel" "evdev"
[    17.574] 	Option "XkbLayout" "us"
[    17.574] 	Option "_source" "server/udev"
[    17.574] 	Option "name" "Video Bus"
[    17.574] 	Option "path" "/dev/input/event6"
[    17.574] 	Option "device" "/dev/input/event6"
[    17.574] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[    17.574] 	Option "driver" "evdev"
[    17.574] (**) Video Bus: always reports core events
[    17.574] (**) Video Bus: Device: "/dev/input/event6"
[    17.574] (--) Video Bus: Found keys
[    17.574] (II) Video Bus: Configuring as keyboard
[    17.574] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[    17.574] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    17.574] (**) Option "xkb_rules" "evdev"
[    17.574] (**) Option "xkb_model" "evdev"
[    17.574] (**) Option "xkb_layout" "us"
[    17.574] (II) XKB: Reusing cached keymap
[    17.575] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    17.575] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.575] (II) Using input driver 'evdev' for 'Power Button'
[    17.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.575] 	Option "XkbRules" "evdev"
[    17.575] 	Option "XkbModel" "evdev"
[    17.575] 	Option "XkbLayout" "us"
[    17.575] 	Option "_source" "server/udev"
[    17.575] 	Option "name" "Power Button"
[    17.575] 	Option "path" "/dev/input/event3"
[    17.575] 	Option "device" "/dev/input/event3"
[    17.575] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    17.575] 	Option "driver" "evdev"
[    17.575] (**) Power Button: always reports core events
[    17.575] (**) Power Button: Device: "/dev/input/event3"
[    17.575] (--) Power Button: Found keys
[    17.575] (II) Power Button: Configuring as keyboard
[    17.575] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    17.575] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    17.575] (**) Option "xkb_rules" "evdev"
[    17.575] (**) Option "xkb_model" "evdev"
[    17.575] (**) Option "xkb_layout" "us"
[    17.575] (II) XKB: Reusing cached keymap
[    17.576] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    17.576] (II) No input driver specified, ignoring this device.
[    17.576] (II) This device may have been added with another device file.
[    17.576] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    17.576] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    17.576] (II) Using input driver 'evdev' for 'Sleep Button'
[    17.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.576] 	Option "XkbRules" "evdev"
[    17.576] 	Option "XkbModel" "evdev"
[    17.576] 	Option "XkbLayout" "us"
[    17.576] 	Option "_source" "server/udev"
[    17.576] 	Option "name" "Sleep Button"
[    17.576] 	Option "path" "/dev/input/event4"
[    17.576] 	Option "device" "/dev/input/event4"
[    17.577] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    17.577] 	Option "driver" "evdev"
[    17.577] (**) Sleep Button: always reports core events
[    17.577] (**) Sleep Button: Device: "/dev/input/event4"
[    17.577] (--) Sleep Button: Found keys
[    17.577] (II) Sleep Button: Configuring as keyboard
[    17.577] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[    17.577] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    17.577] (**) Option "xkb_rules" "evdev"
[    17.577] (**) Option "xkb_model" "evdev"
[    17.577] (**) Option "xkb_layout" "us"
[    17.577] (II) XKB: Reusing cached keymap
[    17.577] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[    17.577] (II) No input driver specified, ignoring this device.
[    17.577] (II) This device may have been added with another device file.
[    17.578] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    17.578] (II) No input driver specified, ignoring this device.
[    17.578] (II) This device may have been added with another device file.
[    17.578] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[    17.578] (II) No input driver specified, ignoring this device.
[    17.578] (II) This device may have been added with another device file.
[    17.578] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[    17.578] (II) No input driver specified, ignoring this device.
[    17.578] (II) This device may have been added with another device file.
[    17.579] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[    17.579] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    17.579] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    17.579] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.579] 	Option "XkbRules" "evdev"
[    17.579] 	Option "XkbModel" "evdev"
[    17.579] 	Option "XkbLayout" "us"
[    17.579] 	Option "_source" "server/udev"
[    17.579] 	Option "name" "USB Optical Mouse"
[    17.579] 	Option "path" "/dev/input/event1"
[    17.579] 	Option "device" "/dev/input/event1"
[    17.579] 	Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1/event1"
[    17.579] 	Option "driver" "evdev"
[    17.579] (**) USB Optical Mouse: always reports core events
[    17.579] (**) USB Optical Mouse: Device: "/dev/input/event1"
[    17.579] (--) USB Optical Mouse: Found 3 mouse buttons
[    17.579] (--) USB Optical Mouse: Found scroll wheel(s)
[    17.579] (--) USB Optical Mouse: Found relative axes
[    17.579] (--) USB Optical Mouse: Found x and y relative axes
[    17.579] (II) USB Optical Mouse: Configuring as mouse
[    17.579] (II) USB Optical Mouse: Adding scrollwheel support
[    17.579] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    17.579] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.579] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1/event1"
[    17.579] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[    17.579] (II) USB Optical Mouse: initialized for relative axes.
[    17.579] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    17.580] (**) USB Optical Mouse: (accel) acceleration profile 0
[    17.580] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    17.580] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    17.580] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    17.580] (II) No input driver specified, ignoring this device.
[    17.580] (II) This device may have been added with another device file.
[    17.580] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event8)
[    17.580] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    17.580] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    17.580] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.580] 	Option "XkbRules" "evdev"
[    17.580] 	Option "XkbModel" "evdev"
[    17.580] 	Option "XkbLayout" "us"
[    17.581] 	Option "_source" "server/udev"
[    17.581] 	Option "name" "Lenovo EasyCamera"
[    17.581] 	Option "path" "/dev/input/event8"
[    17.581] 	Option "device" "/dev/input/event8"
[    17.581] 	Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input8/event8"
[    17.581] 	Option "driver" "evdev"
[    17.581] (**) Lenovo EasyCamera: always reports core events
[    17.581] (**) Lenovo EasyCamera: Device: "/dev/input/event8"
[    17.581] (--) Lenovo EasyCamera: Found keys
[    17.581] (II) Lenovo EasyCamera: Configuring as keyboard
[    17.581] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input8/event8"
[    17.581] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[    17.581] (**) Option "xkb_rules" "evdev"
[    17.581] (**) Option "xkb_model" "evdev"
[    17.581] (**) Option "xkb_layout" "us"
[    17.581] (II) XKB: Reusing cached keymap
[    17.581] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    17.581] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    17.581] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    17.581] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.581] 	Option "XkbRules" "evdev"
[    17.581] 	Option "XkbModel" "evdev"
[    17.581] 	Option "XkbLayout" "us"
[    17.582] 	Option "_source" "server/udev"
[    17.582] 	Option "name" "AT Translated Set 2 keyboard"
[    17.582] 	Option "path" "/dev/input/event0"
[    17.582] 	Option "device" "/dev/input/event0"
[    17.582] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    17.582] 	Option "driver" "evdev"
[    17.582] (**) AT Translated Set 2 keyboard: always reports core events
[    17.582] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    17.582] (--) AT Translated Set 2 keyboard: Found keys
[    17.582] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    17.582] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    17.582] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    17.582] (**) Option "xkb_rules" "evdev"
[    17.582] (**) Option "xkb_model" "evdev"
[    17.582] (**) Option "xkb_layout" "us"
[    17.582] (II) XKB: Reusing cached keymap
[    17.582] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event9)
[    17.582] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[    17.582] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[    17.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.582] 	Option "XkbRules" "evdev"
[    17.582] 	Option "XkbModel" "evdev"
[    17.582] 	Option "XkbLayout" "us"
[    17.583] 	Option "_source" "server/udev"
[    17.583] 	Option "name" "PS/2 Generic Mouse"
[    17.583] 	Option "path" "/dev/input/event9"
[    17.583] 	Option "device" "/dev/input/event9"
[    17.583] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input9/event9"
[    17.583] 	Option "driver" "evdev"
[    17.583] (**) PS/2 Generic Mouse: always reports core events
[    17.583] (**) PS/2 Generic Mouse: Device: "/dev/input/event9"
[    17.583] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[    17.583] (--) PS/2 Generic Mouse: Found relative axes
[    17.583] (--) PS/2 Generic Mouse: Found x and y relative axes
[    17.583] (II) PS/2 Generic Mouse: Configuring as mouse
[    17.583] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[    17.583] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.583] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input9/event9"
[    17.583] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[    17.583] (II) PS/2 Generic Mouse: initialized for relative axes.
[    17.583] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[    17.583] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[    17.583] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    17.583] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    17.583] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[    17.583] (II) No input driver specified, ignoring this device.
[    17.583] (II) This device may have been added with another device file.
[    17.584] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    17.584] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    17.584] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    17.584] (II) LoadModule: "synaptics"
[    17.584] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    17.593] (II) Module synaptics: vendor="X.Org Foundation"
[    17.593] 	compiled for 1.11.0, module version = 1.5.0
[    17.593] 	Module class: X.Org XInput Driver
[    17.593] 	ABI class: X.Org XInput driver, version 13.0
[    17.593] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    17.593] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    17.593] 	Option "_source" "server/udev"
[    17.593] 	Option "name" "SynPS/2 Synaptics TouchPad"
[    17.593] 	Option "path" "/dev/input/event15"
[    17.593] 	Option "device" "/dev/input/event15"
[    17.593] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input15/event15"
[    17.593] 	Option "driver" "synaptics"
[    17.593] 	Option "TapButton1" "1"
[    17.593] 	Option "TapButton2" "2"
[    17.593] 	Option "TapButton3" "3"
[    17.593] 	Option "VertEdgeScroll" "on"
[    17.593] 	Option "VertTwoFingerScroll" "on"
[    17.593] 	Option "HorizEdgeScroll" "on"
[    17.593] 	Option "HorizTwoFingerScroll" "on"
[    17.593] 	Option "CircularScrolling" "on"
[    17.593] 	Option "CircScrollTrigger" "2"
[    17.594] 	Option "EmulateTwoFingerMinZ" "40"
[    17.594] 	Option "EmulateTwoFingerMinW" "8"
[    17.594] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    17.594] (**) Option "Device" "/dev/input/event15"
[    17.820] (**) Option "Device" "/dev/input/event15"
[    17.820] port opened successfully
[    17.926] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5632
[    17.926] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4554
[    17.926] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    17.926] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[    17.926] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    17.926] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    17.926] (**) Option "EmulateTwoFingerMinZ" "40"
[    17.926] (**) Option "EmulateTwoFingerMinW" "8"
[    17.926] (**) Option "VertEdgeScroll" "on"
[    17.926] (**) Option "HorizEdgeScroll" "on"
[    17.926] (**) Option "VertTwoFingerScroll" "on"
[    17.926] (**) Option "HorizTwoFingerScroll" "on"
[    17.926] (**) Option "TapButton1" "1"
[    17.927] (**) Option "TapButton2" "2"
[    17.927] (**) Option "TapButton3" "3"
[    17.927] (**) Option "CircularScrolling" "on"
[    17.927] (**) Option "CircScrollTrigger" "2"
[    18.033] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.033] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.133] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input15/event15"
[    18.133] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    18.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    18.133] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    18.133] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    18.133] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    18.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    18.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.133] (**) Option "Device" "/dev/input/event15"
[    18.133] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.134] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    18.134] (II) No input driver specified, ignoring this device.
[    18.134] (II) This device may have been added with another device file.
[    18.134] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[    18.134] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    18.134] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    18.134] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.134] 	Option "XkbRules" "evdev"
[    18.134] 	Option "XkbModel" "evdev"
[    18.134] 	Option "XkbLayout" "us"
[    18.134] 	Option "_source" "server/udev"
[    18.134] 	Option "name" "Ideapad extra buttons"
[    18.134] 	Option "path" "/dev/input/event10"
[    18.134] 	Option "device" "/dev/input/event10"
[    18.134] 	Option "config_info" "udev:/sys/devices/platform/ideapad/input/input10/event10"
[    18.134] 	Option "driver" "evdev"
[    18.134] (**) Ideapad extra buttons: always reports core events
[    18.134] (**) Ideapad extra buttons: Device: "/dev/input/event10"
[    18.134] (--) Ideapad extra buttons: Found keys
[    18.134] (II) Ideapad extra buttons: Configuring as keyboard
[    18.134] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input10/event10"
[    18.134] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[    18.134] (**) Option "xkb_rules" "evdev"
[    18.134] (**) Option "xkb_model" "evdev"
[    18.134] (**) Option "xkb_layout" "us"
[    18.134] (II) XKB: Reusing cached keymap
[    18.135] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    18.135] (II) No input driver specified, ignoring this device.
[    18.135] (II) This device may have been added with another device file.
[    18.140] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    18.143] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    18.143] (II) fglrx(0): Printing DDC gathered Modelines:
[    18.143] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    18.143] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    22.762] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    22.762] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.762] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    22.762] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    22.811] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    22.818] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.818] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    22.818] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    22.829] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    22.829] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.829] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    22.829] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    22.840] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    22.840] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.840] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    22.840] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    22.850] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    22.850] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.850] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    22.850] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    38.768] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    38.769] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.769] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    38.769] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    38.868] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    38.868] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.868] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    38.868] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    38.879] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    38.879] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.879] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    38.879] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    38.890] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    38.890] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.890] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    38.890] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    38.901] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    38.901] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.901] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    38.901] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    38.912] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    38.912] (II) fglrx(0): Printing DDC gathered Modelines:
[    38.912] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    38.912] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    41.289] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    41.289] (II) fglrx(0): Printing DDC gathered Modelines:
[    41.289] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    41.289] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[    52.572] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[    52.572] (II) fglrx(0): Printing DDC gathered Modelines:
[    52.572] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[    52.572] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[   700.734] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[   700.734] (II) fglrx(0): Printing DDC gathered Modelines:
[   700.734] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[   700.734] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)

谢谢

离线

#8 2012-03-31 12:40:21

sigma
会员
注册时间: 2012-01-03
帖子: 183

Re: 开启ssh或者mentohust后Arch无法正常关机(重启)

我昨天看了下mentohust源码,里面没有什么跟抢占锁有关的部分。尝试更新下系统看看能不能把内核关联文件升级了,这个问题应该是特定版本啥的引起的吧


riverrun, past Eve and Adam's.

离线

页脚