您尚未登录。

#1 2018-08-02 01:47:55

Kurobac
小白
注册时间: 2018-05-12
帖子: 85

偶发的键盘按键无响应

键盘用了两年多,换用Arch之后开始出现,三个月内大概出现过三四次,想不出来是因为什么导致的。
只有键盘上的四个按键(静音,音量加减,启动计算器)无法相应,其余按键全部正常。正常情况下这几个按键是开箱即用的。
按照Wiki排查,dmesg和showkey都无法响应出scancode和keycode。
这次出现之前我在用虚拟机,键盘是Passthrough的,在虚拟机中工作一切正常,中间我还将键盘交还给宿主机调了下音量。虚拟机关闭之后(不知道具体是什么时候)键盘上的四个按键停止响应。
最后重新插拔键盘恢复正常(不在日志里)。
dmesg

[    0.000000] Linux version 4.17.11-arch1 (builduser@heftig-28170) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sun Jul 29 10:11:16 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0ea94209-a3b5-494f-ab14-3f105121d9b9 rw quiet splash loglevel=3 udev.log_priority=3 intel_iommu=on
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000056b1dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000056b1e000-0x0000000056b1efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000056b1f000-0x0000000056b48fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000056b49000-0x0000000056b9bfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000056b9c000-0x00000000578bcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000578bd000-0x0000000066e59fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000066e5a000-0x0000000066eb0fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000066eb1000-0x00000000677b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000677b3000-0x0000000067f99fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000067f9a000-0x0000000067ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000067fff000-0x0000000067ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000068000000-0x00000000680fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000485ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x67f31000  ACPI 2.0=0x67f31000  SMBIOS=0xf05e0  MPS=0xfc430 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170 Gaming K4, BIOS P7.30 01/23/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x486000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 0070000000 mask 7FF0000000 uncachable
[    0.000000]   2 base 006C000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 006A000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 0069000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 0068800000 mask 7FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x68000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fc6e0-0x000fc6ef] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x314662000, 0x314662fff] PGTABLE
[    0.000000] BRK [0x314663000, 0x314663fff] PGTABLE
[    0.000000] BRK [0x314664000, 0x314664fff] PGTABLE
[    0.000000] BRK [0x314665000, 0x314665fff] PGTABLE
[    0.000000] BRK [0x314666000, 0x314666fff] PGTABLE
[    0.000000] BRK [0x314667000, 0x314667fff] PGTABLE
[    0.000000] BRK [0x314668000, 0x314668fff] PGTABLE
[    0.000000] BRK [0x314669000, 0x314669fff] PGTABLE
[    0.000000] BRK [0x31466a000, 0x31466afff] PGTABLE
[    0.000000] BRK [0x31466b000, 0x31466bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x33ddc000-0x3459afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000067F31000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x0000000067F310A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x0000000067F52328 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000067F311F0 021132 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x0000000067F99F80 000040
[    0.000000] ACPI: APIC 0x0000000067F52438 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x0000000067F524C0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x0000000067F52508 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x0000000067F525A8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x0000000067F525E8 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x0000000067F52620 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: LPIT 0x0000000067F52990 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x0000000067F52A28 00002B (v02 INTEL  UsbCTabl 00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x0000000067F52A58 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x0000000067F52A90 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x0000000067F52AE8 000618 (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
[    0.000000] ACPI: AAFT 0x0000000067F53100 00051B (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x0000000067F53620 005212 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x0000000067F58838 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x0000000067F58880 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x0000000067F596D8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DMAR 0x0000000067F59710 0000A8 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: ASF! 0x0000000067F597B8 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000485ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x485ffc000-0x485ffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000485ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000056b1dfff]
[    0.000000]   node   0: [mem 0x0000000056b49000-0x0000000056b9bfff]
[    0.000000]   node   0: [mem 0x00000000578bd000-0x0000000066e59fff]
[    0.000000]   node   0: [mem 0x0000000067fff000-0x0000000067ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000485ffffff]
[    0.000000] Reserved but unavailable: 8020 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000485ffffff]
[    0.000000] On node 0 totalpages: 4112556
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6469 pages used for memmap
[    0.000000]   DMA32 zone: 413967 pages, LIFO batch:31
[    0.000000]   Normal zone: 57728 pages used for memmap
[    0.000000]   Normal zone: 3694592 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x69000000-0x78ffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x56b1e000-0x56b1efff]
[    0.000000] PM: Registered nosave memory: [mem 0x56b1f000-0x56b48fff]
[    0.000000] PM: Registered nosave memory: [mem 0x56b9c000-0x578bcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x66e5a000-0x66eb0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x66eb1000-0x677b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x677b3000-0x67f99fff]
[    0.000000] PM: Registered nosave memory: [mem 0x67f9a000-0x67ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x68000000-0x680fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x68100000-0x68ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x69000000-0x78ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x79000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4048269
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0ea94209-a3b5-494f-ab14-3f105121d9b9 rw quiet splash loglevel=3 udev.log_priority=3 intel_iommu=on
[    0.000000] DMAR: IOMMU enabled
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16003040K/16450224K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1480K init, 608K bss, 447184K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32658 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x00000067555000 end: 0x00000067574fff
[    0.003333] DMAR: RMRR base: 0x00000068800000 end: 0x00000078ffffff
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.003333] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.003333] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 3500.000 MHz processor
[    0.023333] tsc: Detected 3504.000 MHz TSC
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3282142a9b0, max_idle_ns: 440795384778 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 7010.00 BogoMIPS (lpj=11680000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.023333] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023333] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.023333] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.023333] CPU: Physical Processor ID: 0
[    0.023333] CPU: Processor Core ID: 0
[    0.023333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023333] mce: CPU supports 10 MCE banks
[    0.023333] CPU0: Thermal monitoring enabled (TM1)
[    0.023333] process: using mwait in idle threads
[    0.023333] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.023333] Spectre V2 : Mitigation: Full generic retpoline
[    0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.023333] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.023333] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.023333] Speculative Store Bypass: Vulnerable
[    0.028532] Freeing SMP alternatives memory: 28K
[    0.030748] TSC deadline timer enabled
[    0.030753] smpboot: CPU0: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.046685] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.046747] ... version:                4
[    0.046747] ... bit width:              48
[    0.046748] ... generic registers:      8
[    0.046748] ... value mask:             0000ffffffffffff
[    0.046749] ... max period:             00007fffffffffff
[    0.046749] ... fixed-purpose events:   3
[    0.046749] ... event mask:             00000007000000ff
[    0.050016] Hierarchical SRCU implementation.
[    0.060145] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.063357] smp: Bringing up secondary CPUs ...
[    0.086694] x86: Booting SMP configuration:
[    0.086697] .... node  #0, CPUs:      #1 #2 #3
[    0.133745] smp: Brought up 1 node, 4 CPUs
[    0.133745] smpboot: Max logical packages: 1
[    0.133745] smpboot: Total of 4 processors activated (28043.00 BogoMIPS)
[    0.135783] devtmpfs: initialized
[    0.135783] x86/mm: Memory block size: 128MB
[    0.137055] PM: Registering ACPI NVS region [mem 0x56b1e000-0x56b1efff] (4096 bytes)
[    0.137055] PM: Registering ACPI NVS region [mem 0x677b3000-0x67f99fff] (8286208 bytes)
[    0.137055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.137055] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.137055] pinctrl core: initialized pinctrl subsystem
[    0.137055] RTC time:  6:49:53, date: 08/01/18
[    0.137284] NET: Registered protocol family 16
[    0.137396] cpuidle: using governor ladder
[    0.137396] cpuidle: using governor menu
[    0.137396] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.137396] ACPI: bus type PCI registered
[    0.137396] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.137396] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.137396] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.137396] PCI: Using configuration type 1 for base access
[    0.137396] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.137396] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.137396] ACPI: Added _OSI(Module Device)
[    0.137396] ACPI: Added _OSI(Processor Device)
[    0.137396] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.137396] ACPI: Added _OSI(Processor Aggregator Device)
[    0.137396] ACPI: Added _OSI(Linux-Dell-Video)
[    0.165602] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.171313] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.174170] ACPI: Dynamic OEM Table Load:
[    0.174174] ACPI: SSDT 0xFFFFA016B3655800 000705 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.174605] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.175999] ACPI: Dynamic OEM Table Load:
[    0.176002] ACPI: SSDT 0xFFFFA016B3093400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.176877] ACPI: Dynamic OEM Table Load:
[    0.176880] ACPI: SSDT 0xFFFFA016B3653000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.177480] ACPI: Dynamic OEM Table Load:
[    0.177483] ACPI: SSDT 0xFFFFA016B307E200 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.180332] ACPI: Interpreter enabled
[    0.180360] ACPI: (supports S0 S3 S4 S5)
[    0.180361] ACPI: Using IOAPIC for interrupt routing
[    0.180429] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.181199] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.185583] ACPI: Power Resource [WRST] (off)
[    0.185896] ACPI: Power Resource [WRST] (off)
[    0.186186] ACPI: Power Resource [WRST] (off)
[    0.186477] ACPI: Power Resource [WRST] (off)
[    0.186770] ACPI: Power Resource [WRST] (off)
[    0.187061] ACPI: Power Resource [WRST] (off)
[    0.187350] ACPI: Power Resource [WRST] (off)
[    0.187641] ACPI: Power Resource [WRST] (off)
[    0.187954] ACPI: Power Resource [WRST] (off)
[    0.188269] ACPI: Power Resource [WRST] (off)
[    0.188588] ACPI: Power Resource [WRST] (off)
[    0.188879] ACPI: Power Resource [WRST] (off)
[    0.189169] ACPI: Power Resource [WRST] (off)
[    0.189460] ACPI: Power Resource [WRST] (off)
[    0.189755] ACPI: Power Resource [WRST] (off)
[    0.190047] ACPI: Power Resource [WRST] (off)
[    0.190359] ACPI: Power Resource [WRST] (off)
[    0.190669] ACPI: Power Resource [WRST] (off)
[    0.190960] ACPI: Power Resource [WRST] (off)
[    0.191251] ACPI: Power Resource [WRST] (off)
[    0.201887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.201892] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.203214] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.203214] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.203873] PCI host bridge to bus 0000:00
[    0.203874] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.203875] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.203876] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.203877] pci_bus 0000:00: root bus resource [mem 0x79000000-0xdfffffff window]
[    0.203878] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.203879] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.203885] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.204164] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.204197] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.204360] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[    0.204367] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.204372] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.204375] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.204386] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.204550] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.204568] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
[    0.204623] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.204749] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.204767] pci 0000:00:14.2: reg 0x10: [mem 0xdf22e000-0xdf22efff 64bit]
[    0.204919] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.204935] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
[    0.204979] pci 0000:00:16.0: PME# supported from D3hot
[    0.205114] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.205128] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
[    0.205134] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
[    0.205140] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.205146] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.205152] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.205157] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
[    0.205190] pci 0000:00:17.0: PME# supported from D3hot
[    0.205318] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
[    0.205379] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.205390] pci 0000:00:1b.0: Intel SPT PCH root port ACS workaround enabled
[    0.205536] pci 0000:00:1b.2: [8086:a169] type 01 class 0x060400
[    0.205597] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
[    0.205608] pci 0000:00:1b.2: Intel SPT PCH root port ACS workaround enabled
[    0.205748] pci 0000:00:1b.3: [8086:a16a] type 01 class 0x060400
[    0.205810] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[    0.205821] pci 0000:00:1b.3: Intel SPT PCH root port ACS workaround enabled
[    0.205972] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.206026] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.206036] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[    0.206180] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.206234] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.206244] pci 0000:00:1c.3: Intel SPT PCH root port ACS workaround enabled
[    0.206394] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.206455] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.206466] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[    0.206630] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[    0.206843] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.206854] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
[    0.207004] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.207026] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
[    0.207048] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
[    0.207089] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.207262] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.207321] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
[    0.207390] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.207608] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
[    0.207635] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.207644] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[    0.207649] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.207655] pci 0000:01:00.0: reg 0x24: [mem 0xdf100000-0xdf13ffff]
[    0.207661] pci 0000:01:00.0: reg 0x30: [mem 0xdf140000-0xdf15ffff pref]
[    0.207732] pci 0000:01:00.0: supports D1 D2
[    0.207733] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.207808] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
[    0.207831] pci 0000:01:00.1: reg 0x10: [mem 0xdf160000-0xdf163fff 64bit]
[    0.207916] pci 0000:01:00.1: supports D1 D2
[    0.207999] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.208001] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.208003] pci 0000:00:01.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.208005] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[    0.208045] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.208092] pci 0000:00:1b.2: PCI bridge to [bus 03]
[    0.208143] pci 0000:00:1b.3: PCI bridge to [bus 04]
[    0.208183] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.208239] pci 0000:06:00.0: [1969:e0a1] type 00 class 0x020000
[    0.208268] pci 0000:06:00.0: reg 0x10: [mem 0xdf000000-0xdf03ffff 64bit]
[    0.208278] pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.208377] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.208488] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.208490] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.208492] pci 0000:00:1c.3:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.208538] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.210158] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210209] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.210259] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210507] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.210782] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.210782] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.210782] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.210782] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.210782] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.210782] vgaarb: loaded
[    0.210782] pps_core: LinuxPPS API ver. 1 registered
[    0.210782] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.210782] PTP clock support registered
[    0.210782] EDAC MC: Ver: 3.0.0
[    0.210782] Registered efivars operations
[    0.215225] PCI: Using ACPI for IRQ routing
[    0.242669] PCI: pci_cache_line_size set to 64 bytes
[    0.242713] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.242713] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.242714] e820: reserve RAM buffer [mem 0x56b1e000-0x57ffffff]
[    0.242715] e820: reserve RAM buffer [mem 0x56b9c000-0x57ffffff]
[    0.242716] e820: reserve RAM buffer [mem 0x66e5a000-0x67ffffff]
[    0.242716] e820: reserve RAM buffer [mem 0x486000000-0x487ffffff]
[    0.242776] NetLabel: Initializing
[    0.242777] NetLabel:  domain hash size = 128
[    0.242777] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.242786] NetLabel:  unlabeled traffic allowed by default
[    0.242788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.242788] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.244356] clocksource: Switched to clocksource tsc-early
[    0.250273] VFS: Disk quotas dquot_6.6.0
[    0.250282] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.250318] pnp: PnP ACPI init
[    0.250581] system 00:00: [io  0x0280-0x028f] has been reserved
[    0.250582] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.250583] system 00:00: [io  0x02a0-0x02af] has been reserved
[    0.250584] system 00:00: [io  0x02b0-0x02bf] has been reserved
[    0.250587] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250793] pnp 00:01: [dma 0 disabled]
[    0.250824] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.250922] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.250923] system 00:02: [io  0xffff] has been reserved
[    0.250924] system 00:02: [io  0xffff] has been reserved
[    0.250926] system 00:02: [io  0xffff] has been reserved
[    0.250927] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.250928] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.250931] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250997] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.251000] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251013] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.251040] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.251042] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.251234] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.251235] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.251236] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.251237] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.251238] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.251239] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.251240] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.251241] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.251243] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.251244] system 00:06: [mem 0xdffc0000-0xdffdffff] has been reserved
[    0.251246] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251278] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.251279] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.251280] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.251282] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.251283] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.251284] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.251285] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.251287] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251521] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.251523] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.252482] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.252483] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.252484] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.252487] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.253194] pnp: PnP ACPI: found 10 devices
[    0.258456] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.258487] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.258489] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.258491] pci 0000:00:01.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.258493] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[    0.258495] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.258502] pci 0000:00:1b.2: PCI bridge to [bus 03]
[    0.258509] pci 0000:00:1b.3: PCI bridge to [bus 04]
[    0.258516] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.258522] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.258523] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.258526] pci 0000:00:1c.3:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.258530] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.258538] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.258539] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.258540] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.258541] pci_bus 0000:00: resource 7 [mem 0x79000000-0xdfffffff window]
[    0.258541] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.258542] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.258543] pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.258544] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[    0.258545] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.258546] pci_bus 0000:06: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.258668] NET: Registered protocol family 2
[    0.258746] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.258780] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.258885] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.258955] TCP: Hash tables configured (established 131072 bind 65536)
[    0.258975] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.259000] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.259039] NET: Registered protocol family 1
[    0.259047] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.260811] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.260820] PCI: CLS 0 bytes, default 64
[    0.260876] Unpacking initramfs...
[    0.342320] Freeing initrd memory: 7932K
[    0.342343] DMAR: No ATSR found
[    0.342361] DMAR: dmar0: Using Queued invalidation
[    0.342363] DMAR: dmar1: Using Queued invalidation
[    0.342575] DMAR: Setting RMRR:
[    0.342618] DMAR: Setting identity map for device 0000:00:02.0 [0x68800000 - 0x78ffffff]
[    0.342640] DMAR: Setting identity map for device 0000:00:14.0 [0x67555000 - 0x67574fff]
[    0.342645] DMAR: Prepare 0-16MiB unity mapping for LPC
[    0.342660] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    0.342679] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.342710] iommu: Adding device 0000:00:00.0 to group 0
[    0.342718] iommu: Adding device 0000:00:01.0 to group 1
[    0.342724] iommu: Adding device 0000:00:02.0 to group 2
[    0.342732] iommu: Adding device 0000:00:14.0 to group 3
[    0.342737] iommu: Adding device 0000:00:14.2 to group 3
[    0.342746] iommu: Adding device 0000:00:16.0 to group 4
[    0.342752] iommu: Adding device 0000:00:17.0 to group 5
[    0.342760] iommu: Adding device 0000:00:1b.0 to group 6
[    0.342767] iommu: Adding device 0000:00:1b.2 to group 7
[    0.342774] iommu: Adding device 0000:00:1b.3 to group 8
[    0.342781] iommu: Adding device 0000:00:1c.0 to group 9
[    0.342789] iommu: Adding device 0000:00:1c.3 to group 10
[    0.342796] iommu: Adding device 0000:00:1d.0 to group 11
[    0.342808] iommu: Adding device 0000:00:1f.0 to group 12
[    0.342813] iommu: Adding device 0000:00:1f.2 to group 12
[    0.342818] iommu: Adding device 0000:00:1f.3 to group 12
[    0.342823] iommu: Adding device 0000:00:1f.4 to group 12
[    0.342827] iommu: Adding device 0000:01:00.0 to group 1
[    0.342830] iommu: Adding device 0000:01:00.1 to group 1
[    0.342837] iommu: Adding device 0000:06:00.0 to group 13
[    0.343894] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3282142a9b0, max_idle_ns: 440795384778 ns
[    0.343903] clocksource: Switched to clocksource tsc
[    0.343952] Scanning for low memory corruption every 60 seconds
[    0.344301] Initialise system trusted keyrings
[    0.344308] Key type blacklist registered
[    0.344334] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.345063] zbud: loaded
[    0.345270] pstore: using lz4hc compression
[    0.345858] Key type asymmetric registered
[    0.345859] Asymmetric key parser 'x509' registered
[    0.345875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.345891] io scheduler noop registered
[    0.345892] io scheduler deadline registered
[    0.345915] io scheduler cfq registered (default)
[    0.345916] io scheduler mq-deadline registered
[    0.345917] io scheduler kyber registered
[    0.345920] io scheduler bfq registered
[    0.346944] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[    0.346957] pcieport 0000:00:1b.0: Signaling PME with IRQ 123
[    0.346969] pcieport 0000:00:1b.2: Signaling PME with IRQ 124
[    0.346980] pcieport 0000:00:1b.3: Signaling PME with IRQ 125
[    0.346991] pcieport 0000:00:1c.0: Signaling PME with IRQ 126
[    0.347002] pcieport 0000:00:1c.3: Signaling PME with IRQ 127
[    0.347013] pcieport 0000:00:1d.0: Signaling PME with IRQ 128
[    0.347050] efifb: probing for efifb
[    0.347064] efifb: framebuffer at 0xb0000000, using 32448k, total 32448k
[    0.347065] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[    0.347065] efifb: scrolling: redraw
[    0.347066] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.357190] Console: switching to colour frame buffer device 480x135
[    0.367236] fb0: EFI VGA frame buffer device
[    0.367242] intel_idle: MWAIT substates: 0x142120
[    0.367243] intel_idle: v0.4.1 model 0x5E
[    0.367372] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.367425] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.367430] ACPI: Sleep Button [SLPB]
[    0.367450] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.367454] ACPI: Power Button [PWRB]
[    0.367471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.367477] ACPI: Power Button [PWRF]
[    0.367729] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.388677] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.389690] intel_pstate: Intel P-state driver initializing
[    0.389796] intel_pstate: HWP enabled
[    0.389882] ledtrig-cpu: registered to indicate activity on CPUs
[    0.389892] intel_pmc_core:  initialized
[    0.390026] NET: Registered protocol family 10
[    0.392643] Segment Routing with IPv6
[    0.392655] NET: Registered protocol family 17
[    0.392897] RAS: Correctable Errors collector initialized.
[    0.392920] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[    0.392971] microcode: Microcode Update Driver: v2.2.
[    0.392977] sched_clock: Marking stable (392969186, 0)->(372629353, 20339833)
[    0.393099] registered taskstats version 1
[    0.393105] Loading compiled-in X.509 certificates
[    0.393113] zswap: loaded using pool lzo/zbud
[    0.395165] Key type big_key registered
[    0.395979]   Magic number: 14:507:821
[    0.396024] hctosys: unable to open rtc device (rtc0)
[    0.518178] Freeing unused kernel memory: 1480K
[    0.518179] Write protecting the kernel read-only data: 16384k
[    0.520262] Freeing unused kernel memory: 2016K
[    0.520934] Freeing unused kernel memory: 608K
[    0.584047] VFIO - User Level meta-driver version: 0.3
[    0.585200] vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    0.600162] vfio_pci: add [1002:67df[ffff:ffff]] class 0x000000/00000000
[    0.616788] vfio_pci: add [1002:aaf0[ffff:ffff]] class 0x000000/00000000
[    0.656035] SCSI subsystem initialized
[    0.657879] ACPI: bus type USB registered
[    0.657890] usbcore: registered new interface driver usbfs
[    0.657894] usbcore: registered new interface driver hub
[    0.657909] usbcore: registered new device driver usb
[    0.660288] libata version 3.00 loaded.
[    0.662505] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.662509] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.663578] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.663581] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.663682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.663683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.663684] usb usb1: Product: xHCI Host Controller
[    0.663685] usb usb1: Manufacturer: Linux 4.17.11-arch1 xhci-hcd
[    0.663685] usb usb1: SerialNumber: 0000:00:14.0
[    0.663749] hub 1-0:1.0: USB hub found
[    0.663763] hub 1-0:1.0: 16 ports detected
[    0.664796] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.664798] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.664799] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.664823] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.664824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.664825] usb usb2: Product: xHCI Host Controller
[    0.664825] usb usb2: Manufacturer: Linux 4.17.11-arch1 xhci-hcd
[    0.664826] usb usb2: SerialNumber: 0000:00:14.0
[    0.664904] hub 2-0:1.0: USB hub found
[    0.664915] hub 2-0:1.0: 10 ports detected
[    0.665492] usb: port power management may be unreliable
[    0.665624] ahci 0000:00:17.0: version 3.0
[    0.675917] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.675923] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.725501] scsi host0: ahci
[    0.725926] scsi host1: ahci
[    0.726342] scsi host2: ahci
[    0.726730] scsi host3: ahci
[    0.727086] scsi host4: ahci
[    0.727559] scsi host5: ahci
[    0.727697] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 130
[    0.727701] ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 130
[    0.727704] ata3: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b200 irq 130
[    0.727708] ata4: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b280 irq 130
[    0.727712] ata5: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b300 irq 130
[    0.727715] ata6: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b380 irq 130
[    0.993419] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.040506] ata4: SATA link down (SStatus 4 SControl 300)
[    1.040556] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.040584] ata3: SATA link down (SStatus 4 SControl 300)
[    1.040610] ata6: SATA link down (SStatus 4 SControl 300)
[    1.040640] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.040670] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.041490] ata1.00: ATA-10: INTEL SSDSC2KW240H6,  LSF041C, max UDMA/133
[    1.041496] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.041584] ata2.00: ATA-9: ST2000DM001-1ER164, CC26, max UDMA/133
[    1.041589] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.041623] ata5.00: ATA-9: ST3000DM008-2DM166, CC26, max UDMA/133
[    1.041629] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.042092] ata1.00: configured for UDMA/133
[    1.042480] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2KW24 041C PQ: 0 ANSI: 5
[    1.042594] ata2.00: configured for UDMA/133
[    1.042632] ata5.00: configured for UDMA/133
[    1.043398] scsi 1:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC26 PQ: 0 ANSI: 5
[    1.044225] scsi 4:0:0:0: Direct-Access     ATA      ST3000DM008-2DM1 CC26 PQ: 0 ANSI: 5
[    1.051444] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.051465] sd 0:0:0:0: [sda] Write Protect is off
[    1.051470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.051504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.051522] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.051527] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.051550] sd 1:0:0:0: [sdb] Write Protect is off
[    1.051554] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.051587] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.051919] sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.051923] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[    1.051943] sd 4:0:0:0: [sdc] Write Protect is off
[    1.051948] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.051983] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.053807]  sda: sda1 sda2
[    1.054487] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.100411]  sdc: sdc1
[    1.101448]  sdb: sdb1
[    1.101649] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.102252] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.136015] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.16
[    1.136018] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.136020] usb 1-3: Product: USB2.0 Hub
[    1.136021] usb 1-3: Manufacturer: GenesysLogic
[    1.136858] hub 1-3:1.0: USB hub found
[    1.137171] hub 1-3:1.0: 2 ports detected
[    1.256853] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[    1.273748] usb 2-3: LPM exit latency is zeroed, disabling LPM.
[    1.274690] usb 2-3: New USB device found, idVendor=08e4, idProduct=017a, bcdDevice= 1.00
[    1.274696] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.274701] usb 2-3: Product: Pioneer Blu-ray Drive
[    1.274705] usb 2-3: Manufacturer: Pioneer Corporation
[    1.274708] usb 2-3: SerialNumber: 1957102620900056
[    1.280038] usb-storage 2-3:1.0: USB Mass Storage device detected
[    1.280313] scsi host6: usb-storage 2-3:1.0
[    1.280472] usbcore: registered new interface driver usb-storage
[    1.331039] random: fast init done
[    1.396765] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.411086] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.538386] usb 1-4: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.01
[    1.538393] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.538397] usb 1-4: Product: Gaming Mouse G502
[    1.538400] usb 1-4: Manufacturer: Logitech
[    1.538404] usb 1-4: SerialNumber: 166D35553233
[    1.584892] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.600303] systemd[1]: Detected architecture x86-64.
[    1.603432] systemd[1]: Set hostname to <Kurobac-Arch>.
[    1.660212] usb 2-5: new SuperSpeed USB device number 3 using xhci_hcd
[    1.750066] usb 1-3.1: new high-speed USB device number 4 using xhci_hcd
[    1.753898] usb 2-5: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00
[    1.753900] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.753901] usb 2-5: Product: DataTraveler 3.0
[    1.753903] usb 2-5: Manufacturer: Kingston
[    1.753904] usb 2-5: SerialNumber: 08606E694934B060A826FCFE
[    1.755727] usb-storage 2-5:1.0: USB Mass Storage device detected
[    1.755856] scsi host7: usb-storage 2-5:1.0
[    1.763434] random: systemd: uninitialized urandom read (16 bytes read)
[    1.763520] systemd[1]: Listening on Journal Socket.
[    1.763564] random: systemd: uninitialized urandom read (16 bytes read)
[    1.763592] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    1.763600] random: systemd: uninitialized urandom read (16 bytes read)
[    1.764797] systemd[1]: Created slice system-getty.slice.
[    1.764840] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.765032] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.765163] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.766100] systemd[1]: Starting Set Up Additional Binary Formats...
[    1.781176] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    1.782560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.782590] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.782606] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.793220] Guest personality initialized and is inactive
[    1.793690] VMCI host device registered (name=vmci, major=10, minor=57)
[    1.793690] Initialized host personality
[    1.794728] vmmon: loading out-of-tree module taints kernel.
[    1.795522] /dev/vmmon[264]: Module vmmon: registered with major=10 minor=165
[    1.795524] /dev/vmmon[264]: Using tsc_khz as TSC frequency: 3504000
[    1.795525] /dev/vmmon[264]: Module vmmon: initialized
[    1.821624] systemd-journald[268]: Received request to flush runtime journal from PID 1
[    1.840679] usb 1-3.1: New USB device found, idVendor=2717, idProduct=ff48, bcdDevice= 3.18
[    1.840681] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.840681] usb 1-3.1: Product: MI 5
[    1.840682] usb 1-3.1: Manufacturer: Xiaomi
[    1.840683] usb 1-3.1: SerialNumber: bbabc2d4
[    1.898575] random: crng init done
[    1.898576] random: 7 urandom warning(s) missed due to ratelimiting
[    1.933258] Adding 8388604k swap on /swapfile.  Priority:-2 extents:11 across:10043388k SSFS
[    1.954411] rtc_cmos 00:04: RTC can wake from S4
[    1.954855] rtc_cmos 00:04: registered as rtc0
[    1.954864] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.963396] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    1.977709] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.993693] usbcore: registered new interface driver uas
[    1.995142] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    1.996142] Linux agpgart interface v0.103
[    2.000898] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    2.005238] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.005239] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.005239] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.005240] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.005240] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.005241] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.008852] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.018387] cryptd: max_cpu_qlen set to 1000
[    2.031926] AVX2 version of gcm_enc/dec engaged.
[    2.031927] AES CTR mode by8 optimization enabled
[    2.034147] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:89:60:46]
[    2.058852] iTCO_vendor_support: vendor-support=0
[    2.059404] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.059521] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.059609] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.078846] alx 0000:06:00.0 enp6s0: renamed from eth0
[    2.093361] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.104397] usb 1-8: New USB device found, idVendor=045e, idProduct=02d1, bcdDevice= 2.03
[    2.104399] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.104400] usb 1-8: Product: Controller
[    2.104400] usb 1-8: Manufacturer: Microsoft
[    2.104401] usb 1-8: SerialNumber: 7EED8389246B
[    2.115215] intel_rapl: Found RAPL domain package
[    2.115216] intel_rapl: Found RAPL domain core
[    2.115217] intel_rapl: Found RAPL domain uncore
[    2.115217] intel_rapl: Found RAPL domain dram
[    2.172802] [drm] VT-d active for gfx access
[    2.172803] checking generic (b0000000 1fb0000) vs hw (b0000000 10000000)
[    2.172804] fb: switching to inteldrmfb from EFI VGA
[    2.172825] Console: switching to colour dummy device 80x25
[    2.172870] [drm] Replacing VGA console driver
[    2.173420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.173420] [drm] Driver supports precise vblank timestamp query.
[    2.173783] vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    2.173785] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.174112] [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
[    2.176066] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    2.177481] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    2.178943] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.179202] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.179296] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.208442] [drm] amdgpu kernel modesetting enabled.
[    2.217772] fbcon: inteldrmfb (fb0) is primary device
[    2.226705] usb 1-12: new high-speed USB device number 6 using xhci_hcd
[    2.291581] Console: switching to colour frame buffer device 480x135
[    2.295634] scsi 6:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-XD05 3.10 PQ: 0 ANSI: 0
[    2.296165] scsi 6:0:0:0: Attached scsi generic sg3 type 5
[    2.331305] sr 6:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.331308] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.331605] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    2.367170] usb 1-12: New USB device found, idVendor=2357, idProduct=0101, bcdDevice= 0.00
[    2.367175] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.367179] usb 1-12: Product: 802.11n NIC
[    2.367183] usb 1-12: Manufacturer: Realtek
[    2.367186] usb 1-12: SerialNumber: 123456
[    2.371588] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.415595] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[    2.416130] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    2.416132] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.416134] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.416136] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.416137] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    2.416138] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.416140] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.416142] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.416144] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.440099] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[    2.440938] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[    2.440964] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    2.440989] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    2.441017] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    2.441047] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    2.441076] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    2.441105] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    2.441133] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    2.441158] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    2.441194] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    2.441219] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    2.441252] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    2.493378] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[    2.635435] usb 1-14: New USB device found, idVendor=04b4, idProduct=0823, bcdDevice= 1.00
[    2.635444] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.690974] hidraw: raw HID events driver (C) Jiri Kosina
[    2.716472] input: Microsoft X-Box One pad as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18
[    2.716846] usbcore: registered new interface driver xpad
[    2.721176] usbcore: registered new interface driver usbhid
[    2.721179] usbhid: USB HID core driver
[    2.727133] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C332.0001/input/input19
[    2.727686] hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input0
[    2.728270] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C332.0002/input/input20
[    2.775972] scsi 7:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    2.776306] sd 7:0:0:0: Attached scsi generic sg4 type 0
[    2.783455] hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input1
[    2.783612] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:04B4:0823.0003/input/input21
[    2.790122] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.791903] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.843455] hid-generic 0003:04B4:0823.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:0823] on usb-0000:00:14.0-14/input0
[    2.844142] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:04B4:0823.0004/input/input22
[    2.900436] hid-generic 0003:04B4:0823.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:0823] on usb-0000:00:14.0-14/input1
[    2.918191] mousedev: PS/2 mouse device common for all mice
[    2.943600] usbcore: registered new interface driver rtl8812au
[    2.951619] rtl8812au 1-12:1.0 wlp0s20f0u12: renamed from wlan0
[    3.419750] fuse init (API version 7.26)
[    4.410978] sd 7:0:0:0: [sdd] 60632064 512-byte logical blocks: (31.0 GB/28.9 GiB)
[    4.411087] sd 7:0:0:0: [sdd] Write Protect is off
[    4.411089] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
[    4.411546] sd 7:0:0:0: [sdd] No Caching mode page found
[    4.411558] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[    4.425319]  sdd: sdd1 sdd2 sdd3
[    4.428780] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[    4.468949] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[    4.469473] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[    4.470228] alx 0000:06:00.0 enp6s0: NIC Up: 1 Gbps Full
[    4.470492] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[    4.470616] /dev/vmnet: open called by PID 497 (vmnet-bridge)
[    4.470619] /dev/vmnet: hub 0 does not exist, allocating memory.
[    4.470629] /dev/vmnet: port on hub 0 successfully opened
[    4.470633] bridge-enp6s0: up
[    4.470634] bridge-enp6s0: attached
[    4.471963] IPv6: ADDRCONF(NETDEV_UP): wlp0s20f0u12: link is not ready
[    4.854088] /dev/vmnet: open called by PID 551 (vmnet-netifup)
[    4.854094] /dev/vmnet: hub 1 does not exist, allocating memory.
[    4.854120] /dev/vmnet: port on hub 1 successfully opened
[    4.871964] /dev/vmnet: open called by PID 554 (vmnet-dhcpd)
[    4.871971] /dev/vmnet: port on hub 1 successfully opened
[    4.878905] /dev/vmnet: open called by PID 571 (vmnet-natd)
[    4.878909] /dev/vmnet: hub 8 does not exist, allocating memory.
[    4.878922] /dev/vmnet: port on hub 8 successfully opened
[    4.879526] userif-3: sent link down event.
[    4.879528] userif-3: sent link up event.
[    4.880474] /dev/vmnet: open called by PID 572 (vmnet-netifup)
[    4.880478] /dev/vmnet: port on hub 8 successfully opened
[    4.889081] /dev/vmnet: open called by PID 576 (vmnet-dhcpd)
[    4.889087] /dev/vmnet: port on hub 8 successfully opened
[    5.195545] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    5.205824] tun: Universal TUN/TAP device driver, 1.6
[    5.206326] virbr0: port 1(virbr0-nic) entered blocking state
[    5.206845] virbr0: port 1(virbr0-nic) entered disabled state
[    5.206899] device virbr0-nic entered promiscuous mode
[    5.217819] userif-3: sent link down event.
[    5.217821] userif-3: sent link up event.
[    5.310576] virbr0: port 1(virbr0-nic) entered blocking state
[    5.310578] virbr0: port 1(virbr0-nic) entered listening state
[    5.343553] virbr0: port 1(virbr0-nic) entered disabled state
[    5.510508] userif-3: sent link down event.
[    5.510514] userif-3: sent link up event.
[    6.952286] userif-3: sent link down event.
[    6.952292] userif-3: sent link up event.
[   31.949948] virbr0: port 2(vnet0) entered blocking state
[   31.949960] virbr0: port 2(vnet0) entered disabled state
[   31.950068] device vnet0 entered promiscuous mode
[   31.950375] virbr0: port 2(vnet0) entered blocking state
[   31.950377] virbr0: port 2(vnet0) entered listening state
[   32.150226] userif-3: sent link down event.
[   32.150228] userif-3: sent link up event.
[   32.886694] vfio-pci 0000:01:00.0: enabling device (0000 -> 0003)
[   32.887105] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x270
[   32.887114] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x1b@0x2d0
[   32.887121] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x1e@0x370
[   33.973353] virbr0: port 2(vnet0) entered learning state
[   34.210370] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   34.480297] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   34.729890] device enp6s0 entered promiscuous mode
[   34.929919] userif-3: sent link down event.
[   34.929921] userif-3: sent link up event.
[   36.106680] virbr0: port 2(vnet0) entered forwarding state
[   36.106681] virbr0: topology change detected, propagating
[   36.306774] userif-3: sent link down event.
[   36.306775] userif-3: sent link up event.
[   42.823734] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   43.210365] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   44.183724] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   44.473624] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   44.767053] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   45.033661] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   52.003716] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   52.267029] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   52.633673] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   53.506991] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   54.027060] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   54.357080] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   56.127028] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   56.463730] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[   76.030234] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[   76.500249] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[   77.043554] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[   77.323583] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[   77.623588] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[   77.903545] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[  635.216303] userif-3: sent link down event.
[  635.216308] userif-3: sent link up event.
[  637.296411] userif-3: sent link down event.
[  637.296413] userif-3: sent link up event.
[ 2756.190379] userif-3: sent link down event.
[ 2756.190380] userif-3: sent link up event.
[ 2756.783672] userif-3: sent link down event.
[ 2756.783673] userif-3: sent link up event.
[ 2876.953908] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[ 5860.794503] perf: interrupt took too long (3135 > 3127), lowering kernel.perf_event_max_sample_rate to 63600
[ 6376.142545] userif-3: sent link down event.
[ 6376.142547] userif-3: sent link up event.
[ 6381.767885] userif-3: sent link down event.
[ 6381.767888] userif-3: sent link up event.
// 这时候开了虚拟机
[ 8195.065848] usb 1-3.1: USB disconnect, device number 4
[ 8205.468841] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8205.755520] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8206.018832] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8207.352287] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8207.618922] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8207.882308] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8208.152269] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8208.415623] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8208.682262] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8215.868337] usb 1-3: USB disconnect, device number 2
[ 8218.088821] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8218.522139] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8218.958815] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8219.345461] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8219.812132] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8220.285462] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8220.781789] usb 1-3: new high-speed USB device number 8 using xhci_hcd
[ 8220.930916] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.16
[ 8220.930918] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8220.930919] usb 1-3: Product: USB2.0 Hub
[ 8220.930919] usb 1-3: Manufacturer: GenesysLogic
[ 8220.932392] hub 1-3:1.0: USB hub found
[ 8220.932688] hub 1-3:1.0: 2 ports detected
[ 8221.245437] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8222.229031] usb 1-3-port2: Cannot enable. Maybe the USB cable is bad?
[ 8222.352087] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8223.665421] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8223.952082] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8224.215436] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8224.482087] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8224.772035] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8225.038763] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8225.305365] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8225.568714] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8225.842033] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8226.105361] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8233.951954] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8234.221957] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8234.485266] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8234.748600] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8235.061966] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8235.325277] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8235.628603] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8235.891919] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8236.158553] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8238.668446] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8239.151926] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8239.541731] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8239.861730] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8240.138415] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8240.545055] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8240.865055] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[ 8241.175048] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8241.445041] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8241.751711] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 8242.038366] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 8339.897894] usb 1-3: USB disconnect, device number 8
[ 9999.093368] userif-3: sent link down event.
[ 9999.093374] userif-3: sent link up event.
[10000.781455] userif-3: sent link down event.
[10000.781461] userif-3: sent link up event.
[11820.067597] userif-3: sent link down event.
[11820.067602] userif-3: sent link up event.
[11822.841549] userif-3: sent link down event.
[11822.841555] userif-3: sent link up event.
[11841.055334] userif-3: sent link down event.
[11841.055340] userif-3: sent link up event.
[11845.806111] userif-3: sent link down event.
[11845.806114] userif-3: sent link up event.
[12945.416221] perf: interrupt took too long (3921 > 3918), lowering kernel.perf_event_max_sample_rate to 51000
[13064.045912] userif-3: sent link down event.
[13064.045918] userif-3: sent link up event.
[13069.512444] userif-3: sent link down event.
[13069.512450] userif-3: sent link up event.
[16987.006989] userif-3: sent link down event.
[16987.006995] userif-3: sent link up event.
[16988.719634] userif-3: sent link down event.
[16988.719640] userif-3: sent link up event.
[21122.744085] perf: interrupt took too long (4911 > 4901), lowering kernel.perf_event_max_sample_rate to 40500
// 这个东西是我显示器上的USB,可以无视之
[21591.655244] usb 1-3: new high-speed USB device number 11 using xhci_hcd
[21591.804322] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.16
[21591.804324] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[21591.804325] usb 1-3: Product: USB2.0 Hub
[21591.804326] usb 1-3: Manufacturer: GenesysLogic
[21591.805361] hub 1-3:1.0: USB hub found
[21591.805773] hub 1-3:1.0: 2 ports detected
[21592.875750] usb 1-3-port2: Cannot enable. Maybe the USB cable is bad?
// 应该是在这里切回了一次宿主机
[23493.574832] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[23493.725741] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:04B4:0823.0005/input/input23
[23493.781917] hid-generic 0003:04B4:0823.0005: input,hidraw0: USB HID v1.11 Keyboard [HID 04b4:0823] on usb-0000:00:14.0-14/input0
[23493.792144] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:04B4:0823.0006/input/input24
[23493.852043] hid-generic 0003:04B4:0823.0006: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HID 04b4:0823] on usb-0000:00:14.0-14/input1
[23494.111303] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[23494.253215] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C332.0007/input/input25
[23494.253302] hid-generic 0003:046D:C332.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input0
[23494.254125] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C332.0008/input/input26
[23494.307983] hid-generic 0003:046D:C332.0008: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input1
[23512.771275] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[23513.264538] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[23513.647772] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[23513.917762] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[23514.217896] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[23514.497885] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[24207.907089] userif-3: sent link down event.
[24207.907093] userif-3: sent link up event.
[24218.645348] userif-3: sent link down event.
[24218.645352] userif-3: sent link up event.
[27834.866626] userif-3: sent link down event.
[27834.866627] userif-3: sent link up event.
[27836.508793] userif-3: sent link down event.
[27836.508794] userif-3: sent link up event.
[29030.135066] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[29030.438389] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[29030.701730] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[29030.909076] virbr0: port 2(vnet0) entered disabled state
[29030.912962] device vnet0 left promiscuous mode
[29030.912969] virbr0: port 2(vnet0) entered disabled state
// 这里虚拟机关机了
[29030.982861] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C332.0009/input/input27
[29030.982979] hid-generic 0003:046D:C332.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input0
[29030.984071] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C332.000A/input/input28
[29031.038733] hid-generic 0003:046D:C332.000A: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input1
[29031.044500] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:04B4:0823.000B/input/input29
[29031.101416] hid-generic 0003:04B4:0823.000B: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:0823] on usb-0000:00:14.0-14/input0
[29031.108860] userif-3: sent link down event.
[29031.108866] userif-3: sent link up event.
[29031.115534] qemu-system-x86: page allocation failure: order:6, mode:0x140c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
[29031.115538] qemu-system-x86 cpuset=emulator mems_allowed=0
[29031.115550] CPU: 3 PID: 1426 Comm: qemu-system-x86 Tainted: G           O      4.17.11-arch1 #1
[29031.115553] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170 Gaming K4, BIOS P7.30 01/23/2018
[29031.115555] Call Trace:
[29031.115570]  dump_stack+0x5c/0x80
[29031.115578]  warn_alloc.cold.32+0x66/0xe7
[29031.115587]  __alloc_pages_nodemask+0xf4d/0xf80
[29031.115593]  ? select_task_rq_fair+0x68b/0xc20
[29031.115605]  kmalloc_order+0x14/0x40
[29031.115611]  kmalloc_order_trace+0x1d/0xb0
[29031.115624]  hid_add_field+0xc4/0x320 [hid]
[29031.115635]  hid_parser_main+0xce/0x260 [hid]
[29031.115644]  hid_open_report+0x126/0x290 [hid]
[29031.115655]  hid_device_probe+0x147/0x170 [hid]
[29031.115664]  driver_probe_device+0x2da/0x450
[29031.115671]  ? __driver_attach+0xe0/0xe0
[29031.115676]  bus_for_each_drv+0x75/0xc0
[29031.115683]  __device_attach+0xd9/0x150
[29031.115690]  bus_probe_device+0x8a/0xa0
[29031.115695]  device_add+0x3c0/0x670
[29031.115701]  ? __debugfs_create_file+0xaf/0xf0
[29031.115710]  hid_add_device+0xec/0x270 [hid]
[29031.115716]  ? shmem_seek_hole_data+0xa2/0x160
[29031.115725]  usbhid_probe+0x2c0/0x3b0 [usbhid]
[29031.115749]  usb_probe_interface+0xe4/0x2f0 [usbcore]
[29031.115758]  driver_probe_device+0x2da/0x450
[29031.115763]  ? __driver_attach+0xe0/0xe0
[29031.115768]  bus_for_each_drv+0x75/0xc0
[29031.115775]  __device_attach+0xd9/0x150
[29031.115796]  proc_ioctl+0x1b3/0x220 [usbcore]
[29031.115817]  usbdev_do_ioctl+0x270/0x10f0 [usbcore]
[29031.115824]  ? seq_read+0x1ef/0x460
[29031.115830]  ? __seccomp_filter+0x3b/0x250
[29031.115836]  ? preempt_count_add+0x68/0xa0
[29031.115856]  usbdev_ioctl+0xa/0x10 [usbcore]
[29031.115863]  do_vfs_ioctl+0xa4/0x610
[29031.115869]  ? dput.part.5+0x20/0x120
[29031.115875]  ? __fput+0x124/0x1e0
[29031.115883]  ksys_ioctl+0x60/0x90
[29031.115890]  __x64_sys_ioctl+0x16/0x20
[29031.115897]  do_syscall_64+0x5b/0x170
[29031.115904]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[29031.115909] RIP: 0033:0x7f8023e33667
[29031.115913] RSP: 002b:00007ffefcb89268 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[29031.115918] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f8023e33667
[29031.115921] RDX: 00007ffefcb89270 RSI: 00000000c0105512 RDI: 0000000000000087
[29031.115924] RBP: 00007f801e61dd00 R08: 00007ffefcb891b0 R09: 00007f801e602e90
[29031.115926] R10: 00007f8025169268 R11: 0000000000000246 R12: 00007ffefcb892d0
[29031.115929] R13: 0000000000000001 R14: 00007f80240ff488 R15: 00007f80240fbbe0
[29031.116143] Mem-Info:
[29031.116156] active_anon:2793980 inactive_anon:230293 isolated_anon:0
                active_file:276465 inactive_file:593601 isolated_file:0
                unevictable:0 dirty:689 writeback:0 unstable:0
                slab_reclaimable:35011 slab_unreclaimable:15096
                mapped:63798 shmem:168457 pagetables:15221 bounce:0
                free:41756 free_pcp:31 free_cma:0
[29031.116165] Node 0 active_anon:11175920kB inactive_anon:921172kB active_file:1105860kB inactive_file:2374404kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:255192kB dirty:2756kB writeback:0kB shmem:673828kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 8390656kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
[29031.116168] Node 0 DMA free:15880kB min:64kB low:80kB high:96kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15988kB managed:15888kB mlocked:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[29031.116178] lowmem_reserve[]: 0 1545 15701 15701 15701
[29031.116188] Node 0 DMA32 free:71176kB min:6640kB low:8300kB high:9960kB active_anon:617456kB inactive_anon:115860kB active_file:255064kB inactive_file:559608kB unevictable:0kB writepending:544kB present:1655868kB managed:1655608kB mlocked:0kB kernel_stack:224kB pagetables:1532kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[29031.116198] lowmem_reserve[]: 0 0 14156 14156 14156
[29031.116206] Node 0 Normal free:79968kB min:60872kB low:76088kB high:91304kB active_anon:10558024kB inactive_anon:805420kB active_file:851024kB inactive_file:1815292kB unevictable:0kB writepending:2212kB present:14778368kB managed:14500676kB mlocked:0kB kernel_stack:6176kB pagetables:59352kB bounce:0kB free_pcp:124kB local_pcp:120kB free_cma:0kB
[29031.116217] lowmem_reserve[]: 0 0 0 0 0
[29031.116225] Node 0 DMA: 2*4kB (U) 2*8kB (U) 3*16kB (U) 0*32kB 3*64kB (U) 2*128kB (U) 0*256kB 0*512kB 1*1024kB (U) 1*2048kB (M) 3*4096kB (M) = 15880kB
[29031.116257] Node 0 DMA32: 1959*4kB (UME) 2820*8kB (UME) 2230*16kB (UME) 134*32kB (UME) 23*64kB (UE) 1*128kB (E) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 71964kB
[29031.116286] Node 0 Normal: 2126*4kB (UMEH) 3379*8kB (UMEH) 1991*16kB (UMEH) 236*32kB (UMEH) 42*64kB (UMEH) 10*128kB (UMH) 1*256kB (H) 1*512kB (H) 1*1024kB (H) 0*2048kB 0*4096kB = 80704kB
[29031.116320] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[29031.116324] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[29031.116325] 1039502 total pagecache pages
[29031.116330] 1084 pages in swap cache
[29031.116333] Swap cache stats: add 40150, delete 39066, find 1072/1547
[29031.116335] Free swap  = 8230908kB
[29031.116336] Total swap = 8388604kB
[29031.116338] 4112556 pages RAM
[29031.116340] 0 pages HighMem/MovableOnly
[29031.116341] 69513 pages reserved
[29031.116343] 0 pages hwpoisoned
[29031.116775] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:04B4:0823.000C/input/input30
[29031.172035] hid-generic 0003:04B4:0823.000C: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:0823] on usb-0000:00:14.0-14/input1
[29031.172159] input: Microsoft X-Box One pad as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input31
[29032.403599] device enp6s0 left promiscuous mode
[29032.603644] userif-3: sent link down event.
[29032.603649] userif-3: sent link up event.
[29655.836926] userif-3: sent link down event.
[29655.836931] userif-3: sent link up event.
[29662.210434] userif-3: sent link down event.
[29662.210440] userif-3: sent link up event.
[31178.809777] userif-3: sent link down event.
[31178.809782] userif-3: sent link up event.
[31180.946115] userif-3: sent link down event.
[31180.946121] userif-3: sent link up event.

我没看出什么有价值的错误信息……那个Cannot enable. Maybe the USB cable is bad?还是显示器上的USB Hub,我键鼠都是直接插在主板的USB上的……

最近编辑记录 Kurobac (2018-08-02 01:53:07)


# pacman -Syu

离线

#2 2018-08-02 10:01:06

xtricman
エクス·トリクマン
注册时间: 2012-12-26
帖子: 1,267

Re: 偶发的键盘按键无响应

内核日志不会记录键盘事件啊。所以开虚拟机之前evtest一下键盘设备,从虚拟机交还之后再来一次,看能不能看见scancode和keycode。
不太可能键盘回来了唯独4个键没用了。


反社会,精神极其不稳定,随时可能炸碎身边所有人

离线

#3 2018-08-02 17:53:19

Kurobac
小白
注册时间: 2018-05-12
帖子: 85

Re: 偶发的键盘按键无响应

xtricman 说:

内核日志不会记录键盘事件啊。所以开虚拟机之前evtest一下键盘设备,从虚拟机交还之后再来一次,看能不能看见scancode和keycode。
不太可能键盘回来了唯独4个键没用了。

按照Wiki的说法,如果kernel没法将scancode转换成keycode,那么内核日志应该是有记录的。
我当时猜想有没有可能是scancode转换为keycode这步出现了问题,但实际上的问题貌似是kernel干脆就没收到scancode。
不过我试了下evtest,发现了一个貌似很有趣的事情:我的键盘有两个对应的event,一个event对应那四个按键,另一个自然就是除了那四个按键之外的所有键。
我手里没有其他键盘,不知道是我这个键盘比较特别还是都这样。
这样的话可能为什么唯独这四个键失效就有一个比较合理的解释了。
不过我对如何复现这个问题还是一头雾水,可能接下来的排查只能等再碰到这个问题的时候了。
顺便贴一下lsusb

Bus 001 Device 005: ID 04b4:0823 Cypress Semiconductor Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x04b4 Cypress Semiconductor Corp.
  idProduct          0x0823 
  bcdDevice            1.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0042
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          2 Game_Keyboard
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              2 Game_Keyboard
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      63
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               1
    Interface Descriptor:          //看起来这里应该是那四个按键的部分
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              4 Function_Device
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     176
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000

最近编辑记录 Kurobac (2018-08-02 17:58:16)


# pacman -Syu

离线

#4 2018-08-02 18:43:44

Kurobac
小白
注册时间: 2018-05-12
帖子: 85

Re: 偶发的键盘按键无响应

从dmesg摘出来一点

//开机
[    2.783612] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:04B4:0823.0003/input/input21
[    2.843455] hid-generic 0003:04B4:0823.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:0823] on usb-0000:00:14.0-14/input0
[    2.844142] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:04B4:0823.0004/input/input22
[    2.900436] hid-generic 0003:04B4:0823.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:0823] on usb-0000:00:14.0-14/input1
//切回宿主机
[23493.725741] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:04B4:0823.0005/input/input23
[23493.781917] hid-generic 0003:04B4:0823.0005: input,hidraw0: USB HID v1.11 Keyboard [HID 04b4:0823] on usb-0000:00:14.0-14/input0
[23493.792144] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:04B4:0823.0006/input/input24
[23493.852043] hid-generic 0003:04B4:0823.0006: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HID 04b4:0823] on usb-0000:00:14.0-14/input1
//虚拟机关机
[29031.044500] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:04B4:0823.000B/input/input29
[29031.101416] hid-generic 0003:04B4:0823.000B: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:0823] on usb-0000:00:14.0-14/input0
[29031.116775] input: HID 04b4:0823 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:04B4:0823.000C/input/input30
[29031.172035] hid-generic 0003:04B4:0823.000C: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:0823] on usb-0000:00:14.0-14/input1

看完更迷了,这日志看起来一模一样……


# pacman -Syu

离线

#5 2018-08-02 23:50:02

xtricman
エクス·トリクマン
注册时间: 2012-12-26
帖子: 1,267

Re: 偶发的键盘按键无响应

evtest然后按四个键,虚拟机拿走键盘前,拿走后,交还后,都试试看。evtest它是直接从内核-用户态接口read ,ioctl获取事件的,没有什么用户态逻辑,不像showkey要经过Xorg一趟。键盘设备就是按键按下弹起保持之类的事件类,贴一下evtest输出。如果开虚拟机之前正常,不大可能之后内核就彻底收不到四个键的动作了。应该是一直都一样,但是Xorg的某部分逻辑可能被虚拟机进程影响了。


反社会,精神极其不稳定,随时可能炸碎身边所有人

离线

#6 2018-08-03 00:49:27

Kurobac
小白
注册时间: 2018-05-12
帖子: 85

Re: 偶发的键盘按键无响应

xtricman 说:

evtest然后按四个键,虚拟机拿走键盘前,拿走后,交还后,都试试看。evtest它是直接从内核-用户态接口read ,ioctl获取事件的,没有什么用户态逻辑,不像showkey要经过Xorg一趟。键盘设备就是按键按下弹起保持之类的事件类,贴一下evtest输出。如果开虚拟机之前正常,不大可能之后内核就彻底收不到四个键的动作了。应该是一直都一样,但是Xorg的某部分逻辑可能被虚拟机进程影响了。

为啥在tty运行的showkey会经过Xorg……
Reset设备之后虚拟机接管键盘,对于用户态的东西来说,这应该和直接把键盘拔掉没什么区别吧?
我切了好几次,evtest输出均相同。虚拟机接管键盘之后/dev/input下面的event直接就没了,没法试。
我看了下输出,没看出什么特别的。
上面的是其余键的event,下面的是那四个键的event,最后是依次按四个键的输出。

Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x4b4 product 0x823 version 0x111
Input device name: "HID 04b4:0823"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 1 (KEY_ESC)
    Event code 2 (KEY_1)
    Event code 3 (KEY_2)
    Event code 4 (KEY_3)
    Event code 5 (KEY_4)
    Event code 6 (KEY_5)
    Event code 7 (KEY_6)
    Event code 8 (KEY_7)
    Event code 9 (KEY_8)
    Event code 10 (KEY_9)
    Event code 11 (KEY_0)
    Event code 12 (KEY_MINUS)
    Event code 13 (KEY_EQUAL)
    Event code 14 (KEY_BACKSPACE)
    Event code 15 (KEY_TAB)
    Event code 16 (KEY_Q)
    Event code 17 (KEY_W)
    Event code 18 (KEY_E)
    Event code 19 (KEY_R)
    Event code 20 (KEY_T)
    Event code 21 (KEY_Y)
    Event code 22 (KEY_U)
    Event code 23 (KEY_I)
    Event code 24 (KEY_O)
    Event code 25 (KEY_P)
    Event code 26 (KEY_LEFTBRACE)
    Event code 27 (KEY_RIGHTBRACE)
    Event code 28 (KEY_ENTER)
    Event code 29 (KEY_LEFTCTRL)
    Event code 30 (KEY_A)
    Event code 31 (KEY_S)
    Event code 32 (KEY_D)
    Event code 33 (KEY_F)
    Event code 34 (KEY_G)
    Event code 35 (KEY_H)
    Event code 36 (KEY_J)
    Event code 37 (KEY_K)
    Event code 38 (KEY_L)
    Event code 39 (KEY_SEMICOLON)
    Event code 40 (KEY_APOSTROPHE)
    Event code 41 (KEY_GRAVE)
    Event code 42 (KEY_LEFTSHIFT)
    Event code 43 (KEY_BACKSLASH)
    Event code 44 (KEY_Z)
    Event code 45 (KEY_X)
    Event code 46 (KEY_C)
    Event code 47 (KEY_V)
    Event code 48 (KEY_B)
    Event code 49 (KEY_N)
    Event code 50 (KEY_M)
    Event code 51 (KEY_COMMA)
    Event code 52 (KEY_DOT)
    Event code 53 (KEY_SLASH)
    Event code 54 (KEY_RIGHTSHIFT)
    Event code 55 (KEY_KPASTERISK)
    Event code 56 (KEY_LEFTALT)
    Event code 57 (KEY_SPACE)
    Event code 58 (KEY_CAPSLOCK)
    Event code 59 (KEY_F1)
    Event code 60 (KEY_F2)
    Event code 61 (KEY_F3)
    Event code 62 (KEY_F4)
    Event code 63 (KEY_F5)
    Event code 64 (KEY_F6)
    Event code 65 (KEY_F7)
    Event code 66 (KEY_F8)
    Event code 67 (KEY_F9)
    Event code 68 (KEY_F10)
    Event code 69 (KEY_NUMLOCK)
    Event code 70 (KEY_SCROLLLOCK)
    Event code 71 (KEY_KP7)
    Event code 72 (KEY_KP8)
    Event code 73 (KEY_KP9)
    Event code 74 (KEY_KPMINUS)
    Event code 75 (KEY_KP4)
    Event code 76 (KEY_KP5)
    Event code 77 (KEY_KP6)
    Event code 78 (KEY_KPPLUS)
    Event code 79 (KEY_KP1)
    Event code 80 (KEY_KP2)
    Event code 81 (KEY_KP3)
    Event code 82 (KEY_KP0)
    Event code 83 (KEY_KPDOT)
    Event code 86 (KEY_102ND)
    Event code 87 (KEY_F11)
    Event code 88 (KEY_F12)
    Event code 96 (KEY_KPENTER)
    Event code 97 (KEY_RIGHTCTRL)
    Event code 98 (KEY_KPSLASH)
    Event code 99 (KEY_SYSRQ)
    Event code 100 (KEY_RIGHTALT)
    Event code 102 (KEY_HOME)
    Event code 103 (KEY_UP)
    Event code 104 (KEY_PAGEUP)
    Event code 105 (KEY_LEFT)
    Event code 106 (KEY_RIGHT)
    Event code 107 (KEY_END)
    Event code 108 (KEY_DOWN)
    Event code 109 (KEY_PAGEDOWN)
    Event code 110 (KEY_INSERT)
    Event code 111 (KEY_DELETE)
    Event code 119 (KEY_PAUSE)
    Event code 125 (KEY_LEFTMETA)
    Event code 126 (KEY_RIGHTMETA)
    Event code 127 (KEY_COMPOSE)
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 17 (EV_LED)
    Event code 0 (LED_NUML) state 1
    Event code 1 (LED_CAPSL) state 0
    Event code 2 (LED_SCROLLL) state 0
    Event code 3 (LED_COMPOSE) state 0
    Event code 4 (LED_KANA) state 0
Key repeat handling:
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    250
    Repeat code 1 (REP_PERIOD)
      Value     33

Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x4b4 product 0x823 version 0x111
Input device name: "HID 04b4:0823"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 1 (KEY_ESC)
    Event code 2 (KEY_1)
    Event code 3 (KEY_2)
    Event code 4 (KEY_3)
    Event code 5 (KEY_4)
    Event code 6 (KEY_5)
    Event code 7 (KEY_6)
    Event code 8 (KEY_7)
    Event code 9 (KEY_8)
    Event code 10 (KEY_9)
    Event code 11 (KEY_0)
    Event code 12 (KEY_MINUS)
    Event code 13 (KEY_EQUAL)
    Event code 14 (KEY_BACKSPACE)
    Event code 15 (KEY_TAB)
    Event code 16 (KEY_Q)
    Event code 17 (KEY_W)
    Event code 18 (KEY_E)
    Event code 19 (KEY_R)
    Event code 20 (KEY_T)
    Event code 21 (KEY_Y)
    Event code 22 (KEY_U)
    Event code 23 (KEY_I)
    Event code 24 (KEY_O)
    Event code 25 (KEY_P)
    Event code 26 (KEY_LEFTBRACE)
    Event code 27 (KEY_RIGHTBRACE)
    Event code 28 (KEY_ENTER)
    Event code 30 (KEY_A)
    Event code 31 (KEY_S)
    Event code 32 (KEY_D)
    Event code 33 (KEY_F)
    Event code 34 (KEY_G)
    Event code 35 (KEY_H)
    Event code 36 (KEY_J)
    Event code 37 (KEY_K)
    Event code 38 (KEY_L)
    Event code 39 (KEY_SEMICOLON)
    Event code 40 (KEY_APOSTROPHE)
    Event code 41 (KEY_GRAVE)
    Event code 43 (KEY_BACKSLASH)
    Event code 44 (KEY_Z)
    Event code 45 (KEY_X)
    Event code 46 (KEY_C)
    Event code 47 (KEY_V)
    Event code 48 (KEY_B)
    Event code 49 (KEY_N)
    Event code 50 (KEY_M)
    Event code 51 (KEY_COMMA)
    Event code 52 (KEY_DOT)
    Event code 53 (KEY_SLASH)
    Event code 55 (KEY_KPASTERISK)
    Event code 57 (KEY_SPACE)
    Event code 58 (KEY_CAPSLOCK)
    Event code 59 (KEY_F1)
    Event code 60 (KEY_F2)
    Event code 61 (KEY_F3)
    Event code 62 (KEY_F4)
    Event code 63 (KEY_F5)
    Event code 64 (KEY_F6)
    Event code 65 (KEY_F7)
    Event code 66 (KEY_F8)
    Event code 67 (KEY_F9)
    Event code 68 (KEY_F10)
    Event code 69 (KEY_NUMLOCK)
    Event code 70 (KEY_SCROLLLOCK)
    Event code 71 (KEY_KP7)
    Event code 72 (KEY_KP8)
    Event code 73 (KEY_KP9)
    Event code 74 (KEY_KPMINUS)
    Event code 75 (KEY_KP4)
    Event code 76 (KEY_KP5)
    Event code 77 (KEY_KP6)
    Event code 78 (KEY_KPPLUS)
    Event code 79 (KEY_KP1)
    Event code 80 (KEY_KP2)
    Event code 81 (KEY_KP3)
    Event code 82 (KEY_KP0)
    Event code 83 (KEY_KPDOT)
    Event code 86 (KEY_102ND)
    Event code 87 (KEY_F11)
    Event code 88 (KEY_F12)
    Event code 96 (KEY_KPENTER)
    Event code 98 (KEY_KPSLASH)
    Event code 99 (KEY_SYSRQ)
    Event code 102 (KEY_HOME)
    Event code 103 (KEY_UP)
    Event code 104 (KEY_PAGEUP)
    Event code 105 (KEY_LEFT)
    Event code 106 (KEY_RIGHT)
    Event code 107 (KEY_END)
    Event code 108 (KEY_DOWN)
    Event code 109 (KEY_PAGEDOWN)
    Event code 110 (KEY_INSERT)
    Event code 111 (KEY_DELETE)
    Event code 113 (KEY_MUTE)
    Event code 114 (KEY_VOLUMEDOWN)
    Event code 115 (KEY_VOLUMEUP)
    Event code 116 (KEY_POWER)
    Event code 117 (KEY_KPEQUAL)
    Event code 119 (KEY_PAUSE)
    Event code 127 (KEY_COMPOSE)
    Event code 128 (KEY_STOP)
    Event code 130 (KEY_PROPS)
    Event code 131 (KEY_UNDO)
    Event code 133 (KEY_COPY)
    Event code 134 (KEY_OPEN)
    Event code 135 (KEY_PASTE)
    Event code 136 (KEY_FIND)
    Event code 137 (KEY_CUT)
    Event code 138 (KEY_HELP)
    Event code 139 (KEY_MENU)
    Event code 140 (KEY_CALC)
    Event code 142 (KEY_SLEEP)
    Event code 143 (KEY_WAKEUP)
    Event code 144 (KEY_FILE)
    Event code 150 (KEY_WWW)
    Event code 152 (KEY_SCREENLOCK)
    Event code 155 (KEY_MAIL)
    Event code 156 (KEY_BOOKMARKS)
    Event code 158 (KEY_BACK)
    Event code 159 (KEY_FORWARD)
    Event code 161 (KEY_EJECTCD)
    Event code 163 (KEY_NEXTSONG)
    Event code 164 (KEY_PLAYPAUSE)
    Event code 165 (KEY_PREVIOUSSONG)
    Event code 166 (KEY_STOPCD)
    Event code 167 (KEY_RECORD)
    Event code 168 (KEY_REWIND)
    Event code 169 (KEY_PHONE)
    Event code 171 (KEY_CONFIG)
    Event code 172 (KEY_HOMEPAGE)
    Event code 173 (KEY_REFRESH)
    Event code 174 (KEY_EXIT)
    Event code 176 (KEY_EDIT)
    Event code 177 (KEY_SCROLLUP)
    Event code 178 (KEY_SCROLLDOWN)
    Event code 181 (KEY_NEW)
    Event code 182 (KEY_REDO)
    Event code 183 (KEY_F13)
    Event code 184 (KEY_F14)
    Event code 185 (KEY_F15)
    Event code 186 (KEY_F16)
    Event code 187 (KEY_F17)
    Event code 188 (KEY_F18)
    Event code 189 (KEY_F19)
    Event code 190 (KEY_F20)
    Event code 191 (KEY_F21)
    Event code 206 (KEY_CLOSE)
    Event code 207 (KEY_PLAY)
    Event code 208 (KEY_FASTFORWARD)
    Event code 209 (KEY_BASSBOOST)
    Event code 210 (KEY_PRINT)
    Event code 212 (KEY_CAMERA)
    Event code 216 (KEY_CHAT)
    Event code 217 (KEY_SEARCH)
    Event code 219 (KEY_FINANCE)
    Event code 223 (KEY_CANCEL)
    Event code 224 (KEY_BRIGHTNESSDOWN)
    Event code 225 (KEY_BRIGHTNESSUP)
    Event code 228 (KEY_KBDILLUMTOGGLE)
    Event code 231 (KEY_SEND)
    Event code 232 (KEY_REPLY)
    Event code 233 (KEY_FORWARDMAIL)
    Event code 234 (KEY_SAVE)
    Event code 235 (KEY_DOCUMENTS)
    Event code 240 (KEY_UNKNOWN)
    Event code 241 (KEY_VIDEO_NEXT)
    Event code 244 (KEY_BRIGHTNESS_ZERO)
    Event code 256 (BTN_0)
    Event code 272 (BTN_LEFT)
    Event code 273 (BTN_RIGHT)
    Event code 274 (BTN_MIDDLE)
    Event code 275 (BTN_SIDE)
    Event code 276 (BTN_EXTRA)
    Event code 353 (KEY_SELECT)
    Event code 354 (KEY_GOTO)
    Event code 358 (KEY_INFO)
    Event code 362 (KEY_PROGRAM)
    Event code 366 (KEY_PVR)
    Event code 370 (KEY_SUBTITLE)
    Event code 372 (KEY_ZOOM)
    Event code 374 (KEY_KEYBOARD)
    Event code 376 (KEY_PC)
    Event code 377 (KEY_TV)
    Event code 378 (KEY_TV2)
    Event code 379 (KEY_VCR)
    Event code 380 (KEY_VCR2)
    Event code 381 (KEY_SAT)
    Event code 383 (KEY_CD)
    Event code 384 (KEY_TAPE)
    Event code 386 (KEY_TUNER)
    Event code 387 (KEY_PLAYER)
    Event code 389 (KEY_DVD)
    Event code 392 (KEY_AUDIO)
    Event code 393 (KEY_VIDEO)
    Event code 396 (KEY_MEMO)
    Event code 397 (KEY_CALENDAR)
    Event code 398 (KEY_RED)
    Event code 399 (KEY_GREEN)
    Event code 400 (KEY_YELLOW)
    Event code 401 (KEY_BLUE)
    Event code 402 (KEY_CHANNELUP)
    Event code 403 (KEY_CHANNELDOWN)
    Event code 405 (KEY_LAST)
    Event code 407 (KEY_NEXT)
    Event code 408 (KEY_RESTART)
    Event code 409 (KEY_SLOW)
    Event code 410 (KEY_SHUFFLE)
    Event code 412 (KEY_PREVIOUS)
    Event code 416 (KEY_VIDEOPHONE)
    Event code 417 (KEY_GAMES)
    Event code 418 (KEY_ZOOMIN)
    Event code 419 (KEY_ZOOMOUT)
    Event code 420 (KEY_ZOOMRESET)
    Event code 421 (KEY_WORDPROCESSOR)
    Event code 422 (KEY_EDITOR)
    Event code 423 (KEY_SPREADSHEET)
    Event code 424 (KEY_GRAPHICSEDITOR)
    Event code 425 (KEY_PRESENTATION)
    Event code 426 (KEY_DATABASE)
    Event code 427 (KEY_NEWS)
    Event code 428 (KEY_VOICEMAIL)
    Event code 429 (KEY_ADDRESSBOOK)
    Event code 430 (KEY_MESSENGER)
    Event code 431 (KEY_DISPLAYTOGGLE)
    Event code 432 (KEY_SPELLCHECK)
    Event code 433 (KEY_LOGOFF)
    Event code 439 (KEY_MEDIA_REPEAT)
    Event code 442 (KEY_IMAGES)
    Event code 576 (KEY_BUTTONCONFIG)
    Event code 577 (KEY_TASKMANAGER)
    Event code 578 (KEY_JOURNAL)
    Event code 579 (KEY_CONTROLPANEL)
    Event code 580 (KEY_APPSELECT)
    Event code 581 (KEY_SCREENSAVER)
    Event code 582 (KEY_VOICECOMMAND)
    Event code 592 (KEY_BRIGHTNESS_MIN)
    Event code 593 (KEY_BRIGHTNESS_MAX)
    Event code 608 (KEY_KBDINPUTASSIST_PREV)
    Event code 609 (KEY_KBDINPUTASSIST_NEXT)
    Event code 610 (KEY_KBDINPUTASSIST_PREVGROUP)
    Event code 611 (KEY_KBDINPUTASSIST_NEXTGROUP)
    Event code 612 (KEY_KBDINPUTASSIST_ACCEPT)
    Event code 613 (KEY_KBDINPUTASSIST_CANCEL)
  Event type 2 (EV_REL)
    Event code 0 (REL_X)
    Event code 1 (REL_Y)
    Event code 6 (REL_HWHEEL)
    Event code 7 (REL_DIAL)
    Event code 8 (REL_WHEEL)
  Event type 3 (EV_ABS)
    Event code 32 (ABS_VOLUME)
      Value      0
      Min        0
      Max     8191
    Event code 40 (ABS_MISC)
      Value      0
      Min        0
      Max      255
    Event code 41 (?)
      Value      0
      Min        0
      Max      255
    Event code 42 (?)
      Value      0
      Min        0
      Max      255
    Event code 43 (?)
      Value      0
      Min        0
      Max      255
    Event code 44 (?)
      Value      0
      Min        0
      Max      255
    Event code 45 (?)
      Value      0
      Min        0
      Max      255
    Event code 46 (?)
      Value      0
      Min        0
      Max      255
    Event code 47 (ABS_MT_SLOT)
      Value      0
      Min        0
      Max      255
    Event code 48 (ABS_MT_TOUCH_MAJOR)
      Value      0
      Min        0
      Max      255
    Event code 49 (ABS_MT_TOUCH_MINOR)
      Value      0
      Min        0
      Max      255
    Event code 50 (ABS_MT_WIDTH_MAJOR)
      Value      0
      Min        0
      Max      255
    Event code 51 (ABS_MT_WIDTH_MINOR)
      Value      0
      Min        0
      Max      255
    Event code 52 (ABS_MT_ORIENTATION)
      Value      0
      Min        0
      Max      255
    Event code 53 (ABS_MT_POSITION_X)
      Value      0
      Min        0
      Max      255
    Event code 54 (ABS_MT_POSITION_Y)
      Value      0
      Min        0
      Max      255
    Event code 55 (ABS_MT_TOOL_TYPE)
      Value      0
      Min        0
      Max      255
    Event code 56 (ABS_MT_BLOB_ID)
      Value      0
      Min        0
      Max      255
    Event code 57 (ABS_MT_TRACKING_ID)
      Value      0
      Min        0
      Max      255
    Event code 58 (ABS_MT_PRESSURE)
      Value      0
      Min        0
      Max      255
    Event code 59 (ABS_MT_DISTANCE)
      Value      0
      Min        0
      Max      255
    Event code 60 (ABS_MT_TOOL_X)
      Value      0
      Min        0
      Max      255
    Event code 61 (ABS_MT_TOOL_Y)
      Value      0
      Min        0
      Max      255
    Event code 62 (?)
      Value      0
      Min        0
      Max      255
    Event code 63 (?)
      Value      0
      Min        0
      Max      255
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Key repeat handling:
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    250
    Repeat code 1 (REP_PERIOD)
      Value     33


      
Event: time 1533225990.052966, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00e2
Event: time 1533225990.052966, type 1 (EV_KEY), code 113 (KEY_MUTE), value 1
Event: time 1533225990.052966, -------------- SYN_REPORT ------------
Event: time 1533225990.146957, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00e2
Event: time 1533225990.146957, type 1 (EV_KEY), code 113 (KEY_MUTE), value 0
Event: time 1533225990.146957, -------------- SYN_REPORT ------------
Event: time 1533225990.452964, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00ea
Event: time 1533225990.452964, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 1
Event: time 1533225990.452964, -------------- SYN_REPORT ------------
Event: time 1533225990.556954, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00ea
Event: time 1533225990.556954, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 0
Event: time 1533225990.556954, -------------- SYN_REPORT ------------
Event: time 1533225990.817955, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00e9
Event: time 1533225990.817955, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1
Event: time 1533225990.817955, -------------- SYN_REPORT ------------
Event: time 1533225990.909944, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00e9
Event: time 1533225990.909944, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0
Event: time 1533225990.909944, -------------- SYN_REPORT ------------
Event: time 1533225991.169987, type 4 (EV_MSC), code 4 (MSC_SCAN), value c0192
Event: time 1533225991.169987, type 1 (EV_KEY), code 140 (KEY_CALC), value 1
Event: time 1533225991.169987, -------------- SYN_REPORT ------------
Event: time 1533225991.264954, type 4 (EV_MSC), code 4 (MSC_SCAN), value c0192
Event: time 1533225991.264954, type 1 (EV_KEY), code 140 (KEY_CALC), value 0
Event: time 1533225991.264954, -------------- SYN_REPORT ------------

# pacman -Syu

离线

#7 2018-08-03 09:29:31

依云
会员
所在地: a.k.a. 百合仙子
注册时间: 2011-08-21
帖子: 8,384
个人网站

Re: 偶发的键盘按键无响应

你没有看看 journal -n 1000 的输出么?

离线

#8 2018-08-03 10:42:54

xtricman
エクス·トリクマン
注册时间: 2012-12-26
帖子: 1,267

Re: 偶发的键盘按键无响应

那说明按键是正常的,但是Xorg可能有什么地方被虚拟机影响了。

不知道这个虚拟机是靠什么逻辑独占又交还键盘的,估计上游bug。
比较谜,你可以去官方论坛问问


反社会,精神极其不稳定,随时可能炸碎身边所有人

离线

#9 2018-08-03 16:04:43

Kurobac
小白
注册时间: 2018-05-12
帖子: 85

Re: 偶发的键盘按键无响应

xtricman 说:

那说明按键是正常的,但是Xorg可能有什么地方被虚拟机影响了。

不知道这个虚拟机是靠什么逻辑独占又交还键盘的,估计上游bug。
比较谜,你可以去官方论坛问问

可能我没说清楚。
只是这次出现之前我在用虚拟机,但早在我安装虚拟机之前,这个问题就出现过了。而且我完全想不通什么会触发这个问题。
我的虚拟机用了一个月,每天都在用,切换估计至少切了五六十次,才遇到这个问题……
不过既然叫KVM,那这些切换应该都是在内核中实现的吧……
journalctl
https://ptpb.pw/Ouoi
虚拟机大约是23点多关闭的,1点40左右我重新插拔了键盘。

最近编辑记录 Kurobac (2018-08-03 16:19:51)


# pacman -Syu

离线

页脚