[已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

Invincible · 2013-08-13 15:41:07

上LOG

[   218.932] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[   218.933] X Protocol Version 11, Revision 0
[   218.933] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[   218.934] Current Operating System: Linux InvincibleStudio 3.10.5-1-ARCH #1 SMP PREEMPT Mon Aug 5 08:04:22 CEST 2013 x86_64
[   218.934] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e5b38ab4-50b8-4a17-b683-822a14e400d3 rw quiet
[   218.934] Build Date: 01 July 2013  10:48:42AM
[   218.934]  
[   218.935] Current version of pixman: 0.30.2
[   218.936] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   218.936] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   218.937] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 13 22:57:28 2013
[   218.972] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   218.980] (==) No Layout section.  Using the first Screen section.
[   218.980] (==) No screen section available. Using defaults.
[   218.980] (**) |-->Screen "Default Screen Section" (0)
[   218.980] (**) |   |-->Monitor "<default monitor>"
[   218.980] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   218.980] (==) Automatically adding devices
[   218.980] (==) Automatically enabling devices
[   218.980] (==) Automatically adding GPU devices
[   218.992] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   218.992] 	Entry deleted from font path.
[   218.992] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   218.992] 	Entry deleted from font path.
[   218.992] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   218.992] 	Entry deleted from font path.
[   218.993] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   218.993] 	Entry deleted from font path.
[   218.993] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   218.993] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   218.993] 	Entry deleted from font path.
[   218.993] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   218.993] (==) FontPath set to:
	/usr/share/fonts/misc/
[   218.993] (==) ModulePath set to "/usr/lib/xorg/modules"
[   218.993] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   218.993] (II) Loader magic: 0x7fdc20
[   218.993] (II) Module ABI versions:
[   218.993] 	X.Org ANSI C Emulation: 0.4
[   218.993] 	X.Org Video Driver: 14.1
[   218.993] 	X.Org XInput driver : 19.1
[   218.993] 	X.Org Server Extension : 7.0
[   218.994] (II) xfree86: Adding drm device (/dev/dri/card0)
[   218.996] (--) PCI:*(0:1:0:0) 10de:0a62:6823:1001 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[   218.996] Initializing built-in extension Generic Event Extension
[   218.997] Initializing built-in extension SHAPE
[   218.997] Initializing built-in extension MIT-SHM
[   218.998] Initializing built-in extension XInputExtension
[   218.998] Initializing built-in extension XTEST
[   218.999] Initializing built-in extension BIG-REQUESTS
[   218.999] Initializing built-in extension SYNC
[   218.999] Initializing built-in extension XKEYBOARD
[   219.000] Initializing built-in extension XC-MISC
[   219.000] Initializing built-in extension SECURITY
[   219.001] Initializing built-in extension XINERAMA
[   219.001] Initializing built-in extension XFIXES
[   219.001] Initializing built-in extension RENDER
[   219.002] Initializing built-in extension RANDR
[   219.002] Initializing built-in extension COMPOSITE
[   219.002] Initializing built-in extension DAMAGE
[   219.003] Initializing built-in extension MIT-SCREEN-SAVER
[   219.003] Initializing built-in extension DOUBLE-BUFFER
[   219.004] Initializing built-in extension RECORD
[   219.004] Initializing built-in extension DPMS
[   219.004] Initializing built-in extension X-Resource
[   219.005] Initializing built-in extension XVideo
[   219.005] Initializing built-in extension XVideo-MotionCompensation
[   219.006] Initializing built-in extension XFree86-VidModeExtension
[   219.006] Initializing built-in extension XFree86-DGA
[   219.006] Initializing built-in extension XFree86-DRI
[   219.007] Initializing built-in extension DRI2
[   219.007] (II) LoadModule: "glx"
[   219.017] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   219.031] (II) Module glx: vendor="X.Org Foundation"
[   219.031] 	compiled for 1.14.2, module version = 1.0.0
[   219.031] 	ABI class: X.Org Server Extension, version 7.0
[   219.031] (==) AIGLX enabled
[   219.032] Loading extension GLX
[   219.032] (==) Matched nouveau as autoconfigured driver 0
[   219.032] (==) Matched nvidia as autoconfigured driver 1
[   219.032] (==) Matched nv as autoconfigured driver 2
[   219.032] (==) Matched nouveau as autoconfigured driver 3
[   219.032] (==) Matched nvidia as autoconfigured driver 4
[   219.032] (==) Matched nv as autoconfigured driver 5
[   219.032] (==) Matched vesa as autoconfigured driver 6
[   219.032] (==) Matched modesetting as autoconfigured driver 7
[   219.032] (==) Matched fbdev as autoconfigured driver 8
[   219.032] (==) Assigned the driver to the xf86ConfigLayout
[   219.032] (II) LoadModule: "nouveau"
[   219.033] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   219.049] (II) Module nouveau: vendor="X.Org Foundation"
[   219.049] 	compiled for 1.14.2, module version = 1.0.9
[   219.049] 	Module class: X.Org Video Driver
[   219.049] 	ABI class: X.Org Video Driver, version 14.1
[   219.049] (II) LoadModule: "nvidia"
[   219.050] (WW) Warning, couldn't open module nvidia
[   219.050] (II) UnloadModule: "nvidia"
[   219.051] (II) Unloading nvidia
[   219.051] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   219.051] (II) LoadModule: "nv"
[   219.051] (WW) Warning, couldn't open module nv
[   219.051] (II) UnloadModule: "nv"
[   219.051] (II) Unloading nv
[   219.051] (EE) Failed to load module "nv" (module does not exist, 0)
[   219.051] (II) LoadModule: "vesa"
[   219.051] (WW) Warning, couldn't open module vesa
[   219.051] (II) UnloadModule: "vesa"
[   219.051] (II) Unloading vesa
[   219.051] (EE) Failed to load module "vesa" (module does not exist, 0)
[   219.051] (II) LoadModule: "modesetting"
[   219.052] (WW) Warning, couldn't open module modesetting
[   219.052] (II) UnloadModule: "modesetting"
[   219.052] (II) Unloading modesetting
[   219.052] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   219.052] (II) LoadModule: "fbdev"
[   219.052] (WW) Warning, couldn't open module fbdev
[   219.052] (II) UnloadModule: "fbdev"
[   219.052] (II) Unloading fbdev
[   219.052] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   219.052] (II) NOUVEAU driver 
[   219.052] (II) NOUVEAU driver for NVIDIA chipset families :
[   219.052] 	RIVA TNT        (NV04)
[   219.052] 	RIVA TNT2       (NV05)
[   219.052] 	GeForce 256     (NV10)
[   219.052] 	GeForce 2       (NV11, NV15)
[   219.052] 	GeForce 4MX     (NV17, NV18)
[   219.052] 	GeForce 3       (NV20)
[   219.052] 	GeForce 4Ti     (NV25, NV28)
[   219.052] 	GeForce FX      (NV3x)
[   219.053] 	GeForce 6       (NV4x)
[   219.053] 	GeForce 7       (G7x)
[   219.053] 	GeForce 8       (G8x)
[   219.053] 	GeForce GTX 200 (NVA0)
[   219.053] 	GeForce GTX 400 (NVC0)
[   219.053] (++) using VT number 1

[   219.053] (II) [drm] nouveau interface version: 1.1.1
[   219.053] (II) Loading sub module "dri2"
[   219.053] (II) LoadModule: "dri2"
[   219.053] (II) Module "dri2" already built-in
[   219.053] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[   219.053] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   219.053] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[   219.054] (==) NOUVEAU(0): RGB weight 888
[   219.054] (==) NOUVEAU(0): Default visual is TrueColor
[   219.054] (==) NOUVEAU(0): Using HW cursor
[   219.054] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[   219.054] (==) NOUVEAU(0): Page flipping enabled
[   219.054] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[   219.094] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[   219.117] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[   219.145] (II) NOUVEAU(0): EDID for output VGA-1
[   219.145] (II) NOUVEAU(0): Manufacturer: LCD  Model: 2000  Serial#: 65832
[   219.145] (II) NOUVEAU(0): Year: 2010  Week: 4
[   219.145] (II) NOUVEAU(0): EDID Version: 1.3
[   219.145] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   219.145] (II) NOUVEAU(0): Sync:  Separate
[   219.145] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 44  vert.: 25
[   219.145] (II) NOUVEAU(0): Gamma: 2.20
[   219.145] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[   219.145] (II) NOUVEAU(0): First detailed timing is preferred mode
[   219.145] (II) NOUVEAU(0): redX: 0.650 redY: 0.335   greenX: 0.295 greenY: 0.605
[   219.145] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[   219.145] (II) NOUVEAU(0): Supported established timings:
[   219.145] (II) NOUVEAU(0): 720x400@70Hz
[   219.145] (II) NOUVEAU(0): 640x480@60Hz
[   219.145] (II) NOUVEAU(0): 640x480@67Hz
[   219.145] (II) NOUVEAU(0): 640x480@72Hz
[   219.145] (II) NOUVEAU(0): 640x480@75Hz
[   219.145] (II) NOUVEAU(0): 800x600@56Hz
[   219.145] (II) NOUVEAU(0): 800x600@60Hz
[   219.145] (II) NOUVEAU(0): 800x600@72Hz
[   219.145] (II) NOUVEAU(0): 800x600@75Hz
[   219.145] (II) NOUVEAU(0): 832x624@75Hz
[   219.145] (II) NOUVEAU(0): 1024x768@60Hz
[   219.145] (II) NOUVEAU(0): 1024x768@70Hz
[   219.145] (II) NOUVEAU(0): 1024x768@75Hz
[   219.145] (II) NOUVEAU(0): Manufacturer's mask: 0
[   219.145] (II) NOUVEAU(0): Supported standard timings:
[   219.145] (II) NOUVEAU(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   219.145] (II) NOUVEAU(0): #1: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[   219.145] (II) NOUVEAU(0): Supported detailed timing:
[   219.145] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  443 x 249 mm
[   219.145] (II) NOUVEAU(0): h_active: 1600  h_sync: 1624  h_sync_end 1704 h_blank_end 1800 h_border: 0
[   219.145] (II) NOUVEAU(0): v_active: 900  v_sync: 901  v_sync_end 904 v_blanking: 1000 v_border: 0
[   219.145] (II) NOUVEAU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[   219.145] (II) NOUVEAU(0): Monitor name: FG280
[   219.145] (II) NOUVEAU(0): Serial No: AXA1065832
[   219.145] (II) NOUVEAU(0): EDID (in hex):
[   219.145] (II) NOUVEAU(0): 	00ffffffffffff003064002028010100
[   219.145] (II) NOUVEAU(0): 	04140103682c19782ab815a6554b9b25
[   219.145] (II) NOUVEAU(0): 	135054bfee0081c0a9c0010101010101
[   219.145] (II) NOUVEAU(0): 	010101010101302a40c8608464301850
[   219.145] (II) NOUVEAU(0): 	1300bbf91000001e000000fd00374b1e
[   219.145] (II) NOUVEAU(0): 	530e000a202020202020000000fc0046
[   219.145] (II) NOUVEAU(0): 	473238300a20202020202020000000ff
[   219.145] (II) NOUVEAU(0): 	00415841313036353833320a20200038
[   219.145] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[   219.145] (II) NOUVEAU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[   219.145] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[   219.145] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   219.145] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   219.168] (II) NOUVEAU(0): EDID for output DVI-I-1
[   219.168] (II) NOUVEAU(0): Output VGA-1 connected
[   219.168] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[   219.168] (II) NOUVEAU(0): Using exact sizes for initial modes
[   219.168] (II) NOUVEAU(0): Output VGA-1 using initial mode 1600x900
[   219.168] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   219.168] (--) NOUVEAU(0): Virtual size is 1600x900 (pitch 0)
[   219.168] (**) NOUVEAU(0):  Driver mode "1600x900": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[   219.168] (II) NOUVEAU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[   219.168] (**) NOUVEAU(0):  Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[   219.168] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[   219.168] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[   219.168] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[   219.168] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   219.168] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[   219.168] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[   219.168] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[   219.168] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   219.168] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[   219.168] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[   219.168] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[   219.168] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[   219.168] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   219.168] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[   219.168] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   219.169] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[   219.169] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   219.169] (==) NOUVEAU(0): DPI set to (96, 96)
[   219.169] (II) Loading sub module "fb"
[   219.169] (II) LoadModule: "fb"
[   219.169] (II) Loading /usr/lib/xorg/modules/libfb.so
[   219.180] (II) Module fb: vendor="X.Org Foundation"
[   219.180] 	compiled for 1.14.2, module version = 1.0.0
[   219.180] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   219.180] (II) Loading sub module "exa"
[   219.180] (II) LoadModule: "exa"
[   219.180] (II) Loading /usr/lib/xorg/modules/libexa.so
[   219.184] (II) Module exa: vendor="X.Org Foundation"
[   219.184] 	compiled for 1.14.2, module version = 2.6.0
[   219.184] 	ABI class: X.Org Video Driver, version 14.1
[   219.184] (II) Loading sub module "shadowfb"
[   219.184] (II) LoadModule: "shadowfb"
[   219.184] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   219.185] (II) Module shadowfb: vendor="X.Org Foundation"
[   219.185] 	compiled for 1.14.2, module version = 1.0.0
[   219.185] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   219.185] (--) Depth 24 pixmap format is 32 bpp
[   219.186] (II) NOUVEAU(0): Opened GPU channel 0
[   219.190] (II) NOUVEAU(0): [DRI2] Setup complete
[   219.190] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[   219.190] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[   219.192] (II) EXA(0): Driver allocated offscreen pixmaps
[   219.192] (II) EXA(0): Driver registered support for the following operations:
[   219.192] (II)         Solid
[   219.192] (II)         Copy
[   219.192] (II)         Composite (RENDER acceleration)
[   219.192] (II)         UploadToScreen
[   219.192] (II)         DownloadFromScreen
[   219.192] (==) NOUVEAU(0): Backing store disabled
[   219.192] (==) NOUVEAU(0): Silken mouse enabled
[   219.207] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[   219.207] (II) NOUVEAU(0): [XvMC] Extension initialized.
[   219.207] (==) NOUVEAU(0): DPMS enabled
[   219.207] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   219.208] (--) RandR disabled
[   219.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   219.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[   219.821] (II) AIGLX: enabled GLX_ARB_create_context
[   219.821] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   219.821] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   219.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   219.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   219.822] (II) AIGLX: Loaded and initialized nouveau
[   219.822] (II) GLX: Initialized DRI2 GL provider for screen 0
[   219.825] (II) NOUVEAU(0): NVEnterVT is called.
[   219.866] (II) NOUVEAU(0): Setting screen physical size to 423 x 238
[   219.866] resize called 1600 900
[   220.077] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   220.078] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   220.078] (II) LoadModule: "evdev"
[   220.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   220.090] (II) Module evdev: vendor="X.Org Foundation"
[   220.090] 	compiled for 1.14.2, module version = 2.8.1
[   220.090] 	Module class: X.Org XInput Driver
[   220.090] 	ABI class: X.Org XInput driver, version 19.1
[   220.090] (II) Using input driver 'evdev' for 'Power Button'
[   220.090] (**) Power Button: always reports core events
[   220.090] (**) evdev: Power Button: Device: "/dev/input/event1"
[   220.090] (--) evdev: Power Button: Vendor 0 Product 0x1
[   220.090] (--) evdev: Power Button: Found keys
[   220.090] (II) evdev: Power Button: Configuring as keyboard
[   220.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   220.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   220.090] (**) Option "xkb_rules" "evdev"
[   220.090] (**) Option "xkb_model" "pc104"
[   220.090] (**) Option "xkb_layout" "us"
[   220.114] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   220.114] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   220.114] (II) Using input driver 'evdev' for 'Power Button'
[   220.114] (**) Power Button: always reports core events
[   220.114] (**) evdev: Power Button: Device: "/dev/input/event0"
[   220.114] (--) evdev: Power Button: Vendor 0 Product 0x1
[   220.114] (--) evdev: Power Button: Found keys
[   220.114] (II) evdev: Power Button: Configuring as keyboard
[   220.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   220.114] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   220.114] (**) Option "xkb_rules" "evdev"
[   220.114] (**) Option "xkb_model" "pc104"
[   220.114] (**) Option "xkb_layout" "us"
[   220.114] (II) config/udev: Adding drm device (/dev/dri/card0)
[   220.115] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[   220.115] (II) No input driver specified, ignoring this device.
[   220.115] (II) This device may have been added with another device file.
[   220.115] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[   220.115] (II) No input driver specified, ignoring this device.
[   220.115] (II) This device may have been added with another device file.
[   220.115] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[   220.115] (II) No input driver specified, ignoring this device.
[   220.115] (II) This device may have been added with another device file.
[   220.115] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[   220.115] (II) No input driver specified, ignoring this device.
[   220.115] (II) This device may have been added with another device file.
[   220.116] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event5)
[   220.116] (II) No input driver specified, ignoring this device.
[   220.116] (II) This device may have been added with another device file.
[   220.116] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[   220.116] (II) No input driver specified, ignoring this device.
[   220.116] (II) This device may have been added with another device file.
[   220.116] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[   220.116] (II) No input driver specified, ignoring this device.
[   220.116] (II) This device may have been added with another device file.
[   220.116] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[   220.116] (II) No input driver specified, ignoring this device.
[   220.116] (II) This device may have been added with another device file.
[   220.117] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event9)
[   220.117] (II) No input driver specified, ignoring this device.
[   220.117] (II) This device may have been added with another device file.
[   220.117] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event3)
[   220.117] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   220.117] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[   220.117] (**) USB Optical Mouse: always reports core events
[   220.117] (**) evdev: USB Optical Mouse: Device: "/dev/input/event3"
[   220.117] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[   220.117] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[   220.117] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[   220.117] (--) evdev: USB Optical Mouse: Found relative axes
[   220.117] (--) evdev: USB Optical Mouse: Found x and y relative axes
[   220.117] (II) evdev: USB Optical Mouse: Configuring as mouse
[   220.117] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[   220.117] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   220.117] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   220.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input3/event3"
[   220.117] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[   220.117] (II) evdev: USB Optical Mouse: initialized for relative axes.
[   220.117] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[   220.117] (**) USB Optical Mouse: (accel) acceleration profile 0
[   220.117] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[   220.117] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[   220.118] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[   220.118] (II) No input driver specified, ignoring this device.
[   220.118] (II) This device may have been added with another device file.
[   220.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   220.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   220.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   220.118] (**) AT Translated Set 2 keyboard: always reports core events
[   220.118] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[   220.118] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   220.118] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   220.118] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   220.118] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   220.118] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   220.118] (**) Option "xkb_rules" "evdev"
[   220.118] (**) Option "xkb_model" "pc104"
[   220.118] (**) Option "xkb_layout" "us"
[   220.118] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   220.118] (II) No input driver specified, ignoring this device.
[   220.118] (II) This device may have been added with another device file.
[   220.450] (II) evdev: AT Translated Set 2 keyboard: Close
[   220.450] (II) UnloadModule: "evdev"
[   220.451] (II) evdev: USB Optical Mouse: Close
[   220.451] (II) UnloadModule: "evdev"
[   220.451] (II) evdev: Power Button: Close
[   220.451] (II) UnloadModule: "evdev"
[   220.451] (II) evdev: Power Button: Close
[   220.451] (II) UnloadModule: "evdev"
[   220.463] (II) NOUVEAU(0): NVLeaveVT is called.
[   220.463] (II) NOUVEAU(0): Closed GPU channel 0
[   220.501] (EE) Server terminated successfully (0). Closing log file.

此问题已经解决，原因是我没有安装twm导致的！！

最近编辑记录 Invincible (2013-08-15 17:56:35)

cuihao · 2013-08-13 15:45:31

别光上log嘛……
N卡？卸了nouveau驱动，装闭源驱动试试。

phoenixlzx · 2013-08-13 16:17:28

感觉你 Xorg 没装好，怎么缺这么多东西？还是你修改了配置文件？

另外帮你排了个版。下次记得用BBcode。

Invincible · 2013-08-13 16:23:44

phoenixlzx 说：

感觉你 Xorg 没装好，怎么缺这么多东西？还是你修改了配置文件？
另外帮你排了个版。下次记得用BBcode。

新人，，，

Invincible · 2013-08-13 16:25:13

phoenixlzx 说：

感觉你 Xorg 没装好，怎么缺这么多东西？还是你修改了配置文件？
另外帮你排了个版。下次记得用BBcode。

我直把Xorg的所有东西都装了，还缺什么？ edev？

依云 · 2013-08-13 16:53:17

[   220.501] (EE) Server terminated successfully (0). Closing log file.

你是怎么启动它的？

nopriler · 2013-08-13 17:14:02

还请LZ提供以下信息：

显卡及安装的驱动
安装的 X11 相关的包
安装的桌面环境/窗口管理器
是否使用显示管理器，如gdm、kdm

Invincible · 2013-08-13 17:54:18

百合仙子说：

[   220.501] (EE) Server terminated successfully (0). Closing log file.

你是怎么启动它的？

启动完自己就退出了，形容一下，秒退！

Invincible · 2013-08-13 17:57:33

nopriler 说：

还请LZ提供以下信息：
显卡及安装的驱动
安装的 X11 相关的包
安装的桌面环境/窗口管理器
是否使用显示管理器，如gdm、kdm

NVIDIA GeForce 205
NOUVEAU 开源驱动
无桌面环境无管理器
安装xinit没有安装显示管理器！

最近编辑记录 Invincible (2013-08-13 18:00:18)

依云 · 2013-08-13 18:05:56

Invincible 说：

百合仙子说：
[   220.501] (EE) Server terminated successfully (0). Closing log file.
你是怎么启动它的？
启动完自己就退出了，形容一下，秒退！

答非所问。

Invincible · 2013-08-13 18:06:03

cuihao 说：

别光上log嘛……
N卡？卸了nouveau驱动，装闭源驱动试试。

貌似没用

Invincible · 2013-08-13 18:09:01

百合仙子说：

Invincible 说：
百合仙子说：
[   220.501] (EE) Server terminated successfully (0). Closing log file.
你是怎么启动它的？
启动完自己就退出了，形容一下，秒退！
答非所问。

startx

phoenixlzx · 2013-08-13 18:20:02

你没装显示管理器，当然自己就退出了。

你这只能算是X装了一半。

Invincible · 2013-08-13 18:23:39

phoenixlzx 说：

你没装显示管理器，当然自己就退出了。
你这只能算是X装了一半。

不是说可以startx吗？

Invincible · 2013-08-13 18:25:29

phoenixlzx 说：

你没装显示管理器，当然自己就退出了。
你这只能算是X装了一半。

如果不用登陆管理器启动 X，需要安装软件包 xorg-xinit。也可以选择使用 xorg-twm, xorg-xclock 和 xterm 作为默认环境。

startx 和 xinit 命令将启动 X 服务器和客户端(startx 脚本是更通用命令 xinit 的前端)。为了确定要运行的客户端，startx/xinit 先在用户目录解析 ~/.xinitrc 文件，如果 ~/.xinitrc 不存在，使用默认的 /etc/X11/xinit/xinitrc, 其中默认会使用 Twm 窗口管理器，Xclock 和 Xterm.

Arch Linux

#1 2013-08-13 15:41:07

[已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

此问题已经解决，原因是我没有安装twm导致的！！

#2 2013-08-13 15:45:31

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#3 2013-08-13 16:17:28

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#4 2013-08-13 16:23:44

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#5 2013-08-13 16:25:13

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#6 2013-08-13 16:53:17

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#7 2013-08-13 17:14:02

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#8 2013-08-13 17:54:18

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#9 2013-08-13 17:57:33

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#10 2013-08-13 18:05:56

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#11 2013-08-13 18:06:03

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#12 2013-08-13 18:09:01

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#13 2013-08-13 18:20:02

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#14 2013-08-13 18:23:39

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

#15 2013-08-13 18:25:29

Re: [已解决]谁能帮忙看下我的 X 环境为何无法启动啊！！

页脚