安装系统之后无线网卡无法使用
IP link的结果为
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 98:83:89:2f:ee:0a brd ff:ff:ff:ff:ff:ff
725: wlp1s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ce:ce:92:8f:60:20 brd ff:ff:ff:ff:ff:ff
尝试启动网卡
sudo ip link set wlp1s0 up
RTNETLINK answers: Input/output error
rfkill list的结果为
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
851: phy850: Wireless LAN
Soft blocked: no
Hard blocked: no
dmesg
[ 883.784264] iwlwifi 0000:01:00.0: Firmware not running - cannot dump error
[ 883.804126] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 883.951222] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 884.030373] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 884.042088] iwlwifi 0000:01:00.0: Microcode SW error detected. Restarting 0x82000000.
[ 884.042249] iwlwifi 0000:01:00.0: Start IWL Error Log Dump:
[ 884.042258] iwlwifi 0000:01:00.0: Status: 0x00000050, count: 6
[ 884.042264] iwlwifi 0000:01:00.0: Loaded firmware version: 36.952d9faa.0
[ 884.042271] iwlwifi 0000:01:00.0: 0x00000038 | BAD_COMMAND
[ 884.042277] iwlwifi 0000:01:00.0: 0x00A002F1 | trm_hw_status0
小白不懂,被无线网困住好久了! 求大神指点啊!!!
最近编辑记录 NightYang (2020-02-17 18:25:41)
离线
有个简单易懂的networkmanager为何不用?
另:NetworkManager (简体中文) - ArchWiki
离线