#1 2012-12-03 10:45:13
- tea1111980
- 会员
- 注册时间： 2012-11-30
- 帖子： 9
桌面登陆进去 提示：failed to execute login command 平台：ARMv7 CorteX-A8
平台：ARMv7 CorteX-A8
我现在是 openbox + gnome3 图形结构，不知道为什么，突然就这样了。
求各位大神们，帮帮小弟。
以下是我开机后 内核加载过程：
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.0.42+ (root@ubuntu) (gcc version 4.7.2 (GCC) ) #8 PREEMPT Fri Nov 16 13:39:08 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Memory cut off:
[ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
[ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] BROM Ver: 1100 1100 1623
[ 0.000000] chip-id: A10 (AW1623 revision C)
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] free_area_init_node: node 0, pgdat c078aa5c, node_mem_map c0847000
[ 0.000000] Normal zone: 1280 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 146176 pages, LIFO batch:31
[ 0.000000] HighMem zone: 768 pages used for memmap
[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 448MB 512MB = 960MB total
[ 0.000000] Memory: 834904k/834904k available, 148136k reserved, 393216K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
[ 0.000000] .text : 0xc0032000 - 0xc074b000 (7268 kB)
[ 0.000000] .data : 0xc074c000 - 0xc0792cc0 ( 284 kB)
[ 0.000000] .bss : 0xc0792ce4 - 0xc0846750 ( 719 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.050000] Initializing cgroup subsys cpuacct
[ 0.050000] Initializing cgroup subsys devices
[ 0.050000] Initializing cgroup subsys freezer
[ 0.060000] Initializing cgroup subsys blkio
[ 0.060000] CPU: Testing write buffer coherency: ok
[ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.070000] devtmpfs: initialized
[ 0.070000] print_constraints: dummy:
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.090000] [ccmu] try to set apb1 parent to sata_pll failed!
[ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.090000] Initialize DMAC OK
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.100000] SCSI subsystem initialized
[ 0.100000] libata version 3.00 loaded.
[ 0.110000] usbcore: registered new interface driver usbfs
[ 0.110000] usbcore: registered new interface driver hub
[ 0.120000] usbcore: registered new device driver usb
[ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.130000] Bluetooth: Core ver 2.16
[ 0.130000] NET: Registered protocol family 31
[ 0.130000] Bluetooth: HCI device and connection manager initialized
[ 0.140000] Bluetooth: HCI socket layer initialized
[ 0.140000] Bluetooth: L2CAP socket layer initialized
[ 0.140000] Bluetooth: SCO socket layer initialized
[ 0.150000] Init eGon pin module V2.0
[ 0.150000] Switching to clocksource aw 64bits couter
[ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.160000] FS-Cache: Loaded
[ 0.160000] CacheFiles: Loaded
[ 0.170000] Switched to NOHz mode on CPU #0
[ 0.170000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[ 0.170000] [sw_hcd0]: usb host driver initialize........
[ 0.180000] [sw_hcd0]: open_usb_clock
[ 0.200000] [sw_hcd0]: host_init_state = 0
[ 0.200000] [sw_hcd0]: platform is usb host
[ 0.210000] WRN:L1440(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: request_irq 38 failed!
[ 0.210000] WRN:L1493(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: sw_hcd_init_controller failed with status -19
[ 0.220000] WRN:L1699(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: sw_hcd_init_controller failed
[ 0.230000] [sw_udc]: udc_init: version 20080411
[ 0.230000] NET: Registered protocol family 2
[ 0.240000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.240000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.260000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.260000] TCP reno registered
[ 0.260000] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.270000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.280000] NET: Registered protocol family 1
[ 0.280000] RPC: Registered named UNIX socket transport module.
[ 0.280000] RPC: Registered udp transport module.
[ 0.290000] RPC: Registered tcp transport module.
[ 0.290000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.300000] [pm]aw_pm_init!
[ 0.300000] audit: initializing netlink socket (disabled)
[ 0.300000] type=2000 audit(0.299:1): initialized
[ 0.310000] highmem bounce pool size: 64 pages
[ 0.320000] VFS: Disk quotas dquot_6.5.2
[ 0.320000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.330000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.330000] fuse init (API version 7.16)
[ 0.340000] msgmni has been set to 862
[ 0.340000] alg: No test for stdrng (krng)
[ 0.350000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.350000] io scheduler noop registered
[ 0.360000] io scheduler deadline registered
[ 0.360000] io scheduler cfq registered (default)
[ 0.360000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.370000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a XScale
[ 0.370000] console [ttyS0] enabled
[ 0.380000] [uart]: used uart info.: 0x05
[ 0.400000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 0.400000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
[ 0.420000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[ 0.420000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
[ 0.420000] G2D: drv_g2d_init
[ 0.420000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
[ 0.420000] G2D: head:d8000000,tail:d9000000
[ 0.420000] G2D: Module initialized.major:252
[ 0.420000] brd: module loaded
[ 0.420000] loop: module loaded
[ 0.420000] [NAND]nand driver, init.
[ 0.420000] cmu_clk is 360
[ 0.420000] nand clk init end
[ 0.420000] offset 0xc: 0x6141
[ 0.420000] offset 0x14: 0x82000008
[ 0.420000] [NAND] nand gpio_request
[ 0.420000] [NAND] nand driver version: 0x2 0x9
[ 0.420000] nand interrupte register ok
[ 0.420000] ret of NFC_ChangMode is 0
[ 0.420000] dma_hdle is 0
[ 0.420000] dma_hdle is 10000008
[ 0.420000] cmu_clk is 360
[ 0.420000] nand clk init end
[ 0.420000] offset 0xc: 0x6141
[ 0.420000] offset 0x14: 0x82000005
[ 0.450000] PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 1
[ 0.450000] PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 0
[ 1.860000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 15564800
[ 1.860000] The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
[ 1.860000] The 2 disk name = env, type = 0, class name = DISK, disk size = 32768
[ 1.860000] The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
[ 1.860000] The 4 disk name = system, type = 0, class name = DISK, disk size = 1048576
[ 1.860000] The 5 disk name = data, type = 1, class name = DISK, disk size = 4194304
[ 1.860000] The 6 disk name = misc, type = 0, class name = DISK, disk size = 32768
[ 1.860000] The 7 disk name = recovery, type = 0, class name = DISK, disk size = 65536
[ 1.860000] The 8 disk name = cache, type = 0, class name = DISK, disk size = 262144
[ 1.860000] The 9 disk name = private, type = 0, class name = DISK, disk size = 32768
[ 1.860000] The 10 disk name = sysrecovery, type = 0, class name = DISK, disk size = 1310720
[ 1.860000] The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 8355840
[ 1.860000] The 11 disk size = 8454144
[ 1.860000] part total count = 12
[ 1.860000] nand: unknown partition table
[ 1.860000] nanda:
[ 1.860000] nandb: unknown partition table
[ 1.870000] nandc: unknown partition table
[ 1.870000] nandd: unknown partition table
[ 1.980000] nande: unknown partition table
[ 1.980000] nandf: unknown partition table
[ 1.980000] nandg: unknown partition table
[ 1.980000] nandh: unknown partition table
[ 1.980000] nandi:
[ 1.990000] nandj: unknown partition table
[ 1.990000] nandk:
[ 1.990000] benn: nand probe enter
[ 1.990000] [NAND]nand driver, ok.
[ 1.990000] emac driver is disabled
[ 1.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.990000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.990000] [sw-ehci1]: open clock
[ 2.010000] [sw-ehci1]: Set USB Power ON
[ 2.010000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.010000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[ 2.010000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
[ 2.030000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.030000] ehci_irq: port change detect
[ 2.030000] hub 1-0:1.0: USB hub found
[ 2.030000] hub 1-0:1.0: 1 port detected
[ 2.030000] [sw-ohci1]: open clock
[ 2.050000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.050000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[ 2.050000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
[ 2.110000] hub 2-0:1.0: USB hub found
[ 2.110000] hub 2-0:1.0: 1 port detected
[ 2.110000] [sw-ehci2]: open clock
[ 2.130000] [sw-ehci2]: Set USB Power ON
[ 2.130000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.130000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[ 2.130000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[ 2.150000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[ 2.150000] ehci_irq: port change detect
[ 2.150000] hub 3-0:1.0: USB hub found
[ 2.150000] hub 3-0:1.0: 1 port detected
[ 2.150000] [sw-ohci2]: open clock
[ 2.170000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.170000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 2.170000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[ 2.230000] hub 4-0:1.0: USB hub found
[ 2.230000] hub 4-0:1.0: 1 port detected
[ 2.230000] Initializing USB Mass Storage driver...
[ 2.230000] usbcore: registered new interface driver usb-storage
[ 2.230000] USB Mass Storage support registered.
[ 2.230000] usbcore: registered new interface driver ums-alauda
[ 2.230000] usbcore: registered new interface driver ums-cypress
[ 2.230000] usbcore: registered new interface driver ums-datafab
[ 2.230000] usbcore: registered new interface driver ums_eneub6250
[ 2.230000] usbcore: registered new interface driver ums-freecom
[ 2.230000] usbcore: registered new interface driver ums-isd200
[ 2.230000] usbcore: registered new interface driver ums-jumpshot
[ 2.230000] usbcore: registered new interface driver ums-karma
[ 2.230000] usbcore: registered new interface driver ums-onetouch
[ 2.230000] usbcore: registered new interface driver ums-realtek
[ 2.230000] usbcore: registered new interface driver ums-sddr09
[ 2.230000] usbcore: registered new interface driver ums-sddr55
[ 2.230000] usbcore: registered new interface driver ums-usbat
[ 2.230000] mousedev: PS/2 mouse device common for all mice
[ 2.230000] sunxi RTC version 0.1
[ 2.230000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
[ 2.230000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 2.230000] sunxi-rtc sunxi-rtc: read time 2012-12-3 2:24:24
[ 2.230000] using rtc device, rtc, for alarms
[ 2.230000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 2.230000] i2c /dev entries driver
[ 2.230000] !!! base_Addr = 0xe88b8c00
[ 2.230000] config i2c gpio with gpio_config api
[ 2.230000] twi0, apb clock = 24000000
[ 2.240000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[ 2.240000] I2C: i2c-0: AW16XX I2C adapter
[ 2.240000] **********start************
[ 2.240000] 0x40
[ 2.240000] 0xf8
[ 2.240000] 0x28
[ 2.240000] 0x0
[ 2.240000] 0x0
[ 2.240000] **********end************
[ 2.240000] !!! base_Addr = 0xe88ba000
[ 2.240000] twi1, apb clock = 24000000
[ 2.240000] I2C: i2c-1: AW16XX I2C adapter
[ 2.240000] **********start************
[ 2.240000] 0x40
[ 2.240000] 0xf8
[ 2.240000] 0x58
[ 2.240000] 0x0
[ 2.240000] 0x0
[ 2.240000] **********end************
[ 2.240000] !!! base_Addr = 0xe88bc400
[ 2.240000] twi2, apb clock = 24000000
[ 2.240000] I2C: i2c-2: AW16XX I2C adapter
[ 2.240000] **********start************
[ 2.240000] 0x40
[ 2.240000] 0xf8
[ 2.240000] 0x58
[ 2.240000] 0x0
[ 2.240000] 0x0
[ 2.240000] **********end************
[ 2.240000] lirc_dev: IR Remote Control driver registered, major 251
[ 2.240000] IR NEC protocol handler initialized
[ 2.240000] IR RC5(x) protocol handler initialized
[ 2.240000] IR RC6 protocol handler initialized
[ 2.240000] IR JVC protocol handler initialized
[ 2.240000] IR Sony protocol handler initialized
[ 2.240000] IR RC5 (streamzap) protocol handler initialized
[ 2.240000] IR LIRC bridge handler initialized
[ 2.240000] Linux video capture interface: v2.00
[ 2.240000] [cedar dev]: install start!!!
[ 2.240000] [cedar dev]: install end!!!
[ 2.240000] [ace_drv] start!!!
[ 2.240000] [ace_drv] init end!!!
[ 2.240000] [pa_drv] start!!!
[ 2.240000] [pa_drv] init end!!!
[ 2.240000] print_constraints: axp20_ldo1: 1300 mV
[ 2.240000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 2.240000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 2.240000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 2.240000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 2.250000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 2.250000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 2.250000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 2.260000] Bluetooth: HCI UART driver ver 2.2
[ 2.260000] Bluetooth: HCI H4 protocol initialized
[ 2.260000] Bluetooth: HCI BCSP protocol initialized
[ 2.260000] Bluetooth: HCILL protocol initialized
[ 2.260000] cpuidle: using governor ladder
[ 2.260000] cpuidle: using governor menu
[ 2.260000] [mmc_pm]: no sdio card used in configuration
[ 2.260000] [mmc]: sunximmc_init
[ 2.260000] [mmc]: sunxi mmc controller using config : 0xb
[ 2.260000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 2.260000] [mmc]: mmc 0 power off !!
[ 2.260000] [mmc]: mmc0 Probe: base:0xe88d6000 irq:32 dma:0 pdes:0xe7bfc000, ret 0.
[ 2.260000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[ 2.260000] [mmc]: mmc 1 power off !!
[ 2.260000] [mmc]: mmc1 Probe: base:0xe88d8000 irq:33 dma:0 pdes:0xe7000000, ret 0.
[ 2.260000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[ 2.260000] [mmc]: mmc 3 power off !!
[ 2.260000] [mmc]: mmc3 Probe: base:0xe88da000 irq:35 dma:0 pdes:0xe7004000, ret 0.
[ 2.260000] usbcore: registered new interface driver usbhid
[ 2.260000] usbhid: USB HID core driver
[ 2.270000] enter sun4i Audio codec!!!
[ 2.270000] sun4i audio support initialized
[ 2.270000] sun4i Audio codec successfully loaded..
[ 2.270000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[ 2.270000] ALSA device list:
[ 2.270000] #0: sun4i-CODEC Audio Codec
[ 2.270000] #1: sun4i-sndhdmi
[ 2.270000] IPv4 over IPv4 tunneling driver
[ 2.270000] TCP cubic registered
[ 2.270000] Initializing XFRM netlink socket
[ 2.270000] NET: Registered protocol family 10
[ 2.270000] NET: Registered protocol family 17
[ 2.270000] NET: Registered protocol family 15
[ 2.270000] Bluetooth: RFCOMM TTY layer initialized
[ 2.270000] Bluetooth: RFCOMM socket layer initialized
[ 2.270000] Bluetooth: RFCOMM ver 1.11
[ 2.270000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.270000] Bluetooth: BNEP filters: protocol multicast
[ 2.270000] 802.1Q VLAN Support v1.8
[ 2.270000] [mmc_pm]: No sdio card, please check your config !!
[ 2.270000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 2.270000] Registering SWP/SWPB emulation handler
[ 2.270000] registered taskstats version 1
[ 2.270000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 2.270000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 2.270000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 2.270000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 2.280000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 2.280000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 2.280000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 2.280000] sunxi-rtc sunxi-rtc: read time 2012-12-3 2:24:24
[ 2.280000] sunxi-rtc sunxi-rtc: setting system clock to 2012-12-03 02:24:24 UTC (1354501464)
[ 2.280000] Waiting for root device /dev/mmcblk0p2...
[ 2.350000] usb 1-1: new high speed USB device number 2 using sw-ehci
[ 2.510000] hub 1-1:1.0: USB hub found
[ 2.510000] hub 1-1:1.0: 7 ports detected
[ 2.640000] usb 3-1: new high speed USB device number 2 using sw-ehci
[ 2.880000] usb 1-1.2: new high speed USB device number 3 using sw-ehci
[ 3.010000] scsi0 : usb-storage 1-1.2:1.0
[ 3.090000] usb 1-1.4: new full speed USB device number 4 using sw-ehci
[ 3.210000] input: Logitech USB Receiver as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
[ 3.230000] generic-usb 0003:046D:C52E.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-sw-ehci-1.4/input0
[ 3.260000] [mmc]: mmc 0 detect change, present 1
[ 3.260000] input: Logitech USB Receiver as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 3.280000] generic-usb 0003:046D:C52E.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-sw-ehci-1.4/input1
[ 3.560000] [mmc]: mmc 0 power on !!
[ 3.600000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 3.610000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
[ 3.620000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 3.640000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 3.650000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 3.660000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
[ 3.710000] mmc0: new high speed SDHC card at address e624
[ 3.720000] mmcblk0: mmc0:e624 SU16G 14.8 GiB
[ 3.730000] mmcblk0: p1 p2
[ 3.830000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[ 3.840000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
[ 4.010000] scsi 0:0:0:0: Direct-Access USB DISK 30X 1.00 PQ: 0 ANSI: 0 CCS
[ 4.030000] sd 0:0:0:0: [sda] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.040000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.050000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 4.060000] sd 0:0:0:0: [sda] No Caching mode page present
[ 4.080000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.090000] sd 0:0:0:0: [sda] No Caching mode page present
[ 4.100000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.120000] sda: sda1
[ 4.130000] sd 0:0:0:0: [sda] No Caching mode page present
[ 4.140000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.150000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.450000] EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: deleting unreferenced inode 619
[ 8.470000] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[ 8.480000] EXT4-fs (mmcblk0p2): recovery complete
[ 8.520000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.540000] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 8.560000] devtmpfs: mounted
[ 8.560000] Freeing init memory: 168K
[ 9.550000] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 9.620000] systemd[1]: Set hostname to <marco>.
[ 11.290000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.310000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.330000] systemd[1]: Expecting device dev-ttyS0.device...
[ 11.370000] systemd[1]: Starting Remote File Systems.
[ 11.400000] systemd[1]: Reached target Remote File Systems.
[ 11.410000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.450000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.460000] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.500000] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.510000] systemd[1]: Starting Encrypted Volumes.
[ 11.550000] systemd[1]: Reached target Encrypted Volumes.
[ 11.560000] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.610000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.630000] systemd[1]: Starting udev Kernel Socket.
[ 11.670000] systemd[1]: Listening on udev Kernel Socket.
[ 11.680000] systemd[1]: Starting udev Control Socket.
[ 11.720000] systemd[1]: Listening on udev Control Socket.
[ 11.730000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.750000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.770000] systemd[1]: Starting Swap.
[ 11.800000] systemd[1]: Reached target Swap.
[ 11.810000] systemd[1]: Starting Journal Socket.
[ 11.840000] systemd[1]: Listening on Journal Socket.
[ 11.850000] systemd[1]: Mounted Huge Pages File System.
[ 11.860000] systemd[1]: Starting udev Kernel Device Manager...
[ 11.930000] systemd[1]: Starting Setup Virtual Console...
[ 12.010000] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.100000] systemd[1]: Started Set Up Additional Binary Formats.
[ 12.120000] systemd[1]: Mounting Debug File System...
[ 12.430000] systemd[1]: Starting Load Kernel Modules...
[ 12.630000] systemd[1]: Starting udev Coldplug all Devices...
[ 12.680000] systemd-udevd[56]: starting version 196
[ 13.020000] systemd[1]: Starting Apply Kernel Variables...
[ 13.190000] systemd[1]: Started File System Check on Root Device.
[ 13.260000] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.490000] systemd[1]: Starting Journal Service...
[ 13.810000] systemd[1]: Started Journal Service.
[ 13.870000] systemd[1]: Mounting Temporary Directory...
[ 14.390000] systemd[1]: Started udev Kernel Device Manager.
[ 14.440000] systemd[1]: Mounted Debug File System.
[ 14.480000] systemd[1]: Started Setup Virtual Console.
[ 14.500000] systemd[1]: Started Apply Kernel Variables.
[ 14.550000] systemd[1]: Started Remount Root and Kernel File Systems.
[ 14.610000] systemd[1]: Mounted Temporary Directory.
[ 14.610000] systemd[1]: Starting Local File Systems.
[ 14.670000] sunxi disp driver loaded (/dev/disp api 1.0)
[ 14.680000] systemd[1]: Reached target Local File Systems.
[ 14.690000] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 14.730000] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 14.780000] systemd[1]: Starting Local File Systems (Pre).
[ 14.800000] systemd[1]: Reached target Local File Systems (Pre).
[ 14.860000] systemd[1]: Starting Load Random Seed...
[ 14.910000] systemd[1]: Started udev Coldplug all Devices.
[ 14.950000] systemd[1]: Started Recreate Volatile Files and Directories.
[ 14.990000] systemd[1]: Started Load Random Seed.
[ 15.040000] systemd-journald[65]: Received SIGUSR1
[ 15.080000] systemd-journald[65]: File /var/log/journal/ce382dcaec5f4191a6fc08f3135c1092/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 15.110000] systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[ 15.410000] systemd[1]: Starting Sound Card.
[ 15.530000] systemd[1]: Reached target Sound Card.
[ 15.560000] systemd[1]: Found device /dev/ttyS0.
[ 17.450000] rtl8188eu driver version=v4.1.2_4787.20120803
[ 17.470000] build time: Nov 16 2012 01:02:59
[ 17.470000] register rtw_netdev_ops to netdev_ops
[ 17.490000] CHIP TYPE: RTL8188E
[ 17.490000]
[ 17.490000] usb_endpoint_descriptor(0):
[ 17.510000] bLength=7
[ 17.510000] bDescriptorType=5
[ 17.510000] bEndpointAddress=81
[ 17.530000] wMaxPacketSize=512
[ 17.530000] bInterval=0
[ 17.530000] RT_usb_endpoint_is_bulk_in = 1
[ 17.550000]
[ 17.550000] usb_endpoint_descriptor(1):
[ 17.550000] bLength=7
[ 17.570000] bDescriptorType=5
[ 17.570000] bEndpointAddress=2
[ 17.570000] wMaxPacketSize=512
[ 17.590000] bInterval=0
[ 17.590000] RT_usb_endpoint_is_bulk_out = 2
[ 17.610000]
[ 17.610000] usb_endpoint_descriptor(2):
[ 17.610000] bLength=7
[ 17.630000] bDescriptorType=5
[ 17.630000] bEndpointAddress=3
[ 17.630000] wMaxPacketSize=512
[ 17.650000] bInterval=0
[ 17.650000] RT_usb_endpoint_is_bulk_out = 3
[ 17.670000] nr_endpoint=3, in_num=1, out_num=2
[ 17.670000]
[ 17.670000] USB_SPEED_HIGH
[ 17.670000] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_
[ 17.680000] Console: switching A_CUT_1T1R_RomVer(0)
[ 17.690000] RF_Type is 3!!
[ 17.690000] _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
[ 17.700000] to colour frame buffer device 160x45
[ 17.710000] EEPROM type is E-FUSE
[ 17.710000] ====> _ReadAdapterInfo8188EU
[ 17.710000] Boot from EFUSE, Autoload OK !
[ 17.820000] UMP<2>: Inserting UMP device driver. Compiled: Nov 16 2012, time: 00:42:43
[ 17.840000] UMP<2>: Using OS memory backend, allocation limit: 134217728
[ 17.850000] UMP: UMP device driver loaded
[ 17.960000] EEPROM ID=0x8129
[ 17.960000] VID = 0x0BDA, PID = 0x8179
[ 17.970000] Customer ID: 0x00, SubCustomer ID: 0xCD
[ 17.980000] mali: use config clk_div 4
[ 17.980000] mali: clk_div 4
[ 17.990000] Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
[ 18.010000] Mali: mali clock set completed, clock is 240000000 Mhz
[ 18.020000] mali: use config clk_div 4
[ 18.020000] mali: clk_div 4
[ 18.030000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
[ 18.040000] Mali: mali clock set completed, clock is 240000000 Mhz
[ 18.050000] ======= Path 0, Channel 0 =======
[ 18.060000] Mali: Mali device driver loaded
[ 18.070000] Index24G_CCK_Base[0][0] = 0x2d
[ 18.080000] Index24G_BW40_Base[0][0] = 0x2c
[ 18.090000] ======= Path 0, Channel 1 =======
[ 18.100000] Index24G_CCK_Base[0][1] = 0x2d
[ 18.100000] Index24G_BW40_Base[0][1] = 0x2c
[ 18.110000] ======= Path 0, Channel 2 =======
[ 18.120000] Index24G_CCK_Base[0][2] = 0x2d
[ 18.130000] Index24G_BW40_Base[0][2] = 0x2c
[ 18.130000] ======= Path 0, Channel 3 =======
[ 18.140000] Index24G_CCK_Base[0][3] = 0x2d
[ 18.150000] Index24G_BW40_Base[0][3] = 0x2c
[ 18.160000] ======= Path 0, Channel 4 =======
[ 18.170000] Index24G_CCK_Base[0][4] = 0x2d
[ 18.170000] Index24G_BW40_Base[0][4] = 0x2c
[ 18.180000] ======= Path 0, Channel 5 =======
[ 18.190000] Index24G_CCK_Base[0][5] = 0x2d
[ 18.200000] Index24G_BW40_Base[0][5] = 0x2c
[ 18.210000] ======= Path 0, Channel 6 =======
[ 18.220000] Index24G_CCK_Base[0][6] = 0x2d
[ 18.220000] Index24G_BW40_Base[0][6] = 0x2c
[ 18.230000] ======= Path 0, Channel 7 =======
[ 18.240000] Index24G_CCK_Base[0][7] = 0x2d
[ 18.250000] Index24G_BW40_Base[0][7] = 0x2c
[ 18.260000] ======= Path 0, Channel 8 =======
[ 18.270000] Index24G_CCK_Base[0][8] = 0x2d
[ 18.280000] Index24G_BW40_Base[0][8] = 0x2c
[ 18.280000] ======= Path 0, Channel 9 =======
[ 18.290000] Index24G_CCK_Base[0][9] = 0x2d
[ 18.300000] Index24G_BW40_Base[0][9] = 0x2c
[ 18.310000] ======= Path 0, Channel 10 =======
[ 18.320000] Index24G_CCK_Base[0][10] = 0x2d
[ 18.330000] Index24G_BW40_Base[0][10] = 0x2c
[ 18.340000] ======= Path 0, Channel 11 =======
[ 18.340000] Index24G_CCK_Base[0][11] = 0x2d
[ 18.350000] Index24G_BW40_Base[0][11] = 0x2c
[ 18.360000] ======= Path 0, Channel 12 =======
[ 18.370000] Index24G_CCK_Base[0][12] = 0x2d
[ 18.380000] Index24G_BW40_Base[0][12] = 0x2b
[ 18.390000] ======= Path 0, Channel 13 =======
[ 18.390000] Index24G_CCK_Base[0][13] = 0x2d
[ 18.400000] Index24G_BW40_Base[0][13] = 0x2b
[ 18.410000] ======= Path 0, Channel 14 =======
[ 18.420000] Index24G_CCK_Base[0][14] = 0x2d
[ 18.430000] Index24G_BW40_Base[0][14] = 0x2b
[ 18.440000] ======= TxCount 0 =======
[ 18.440000] CCK_24G_Diff[0][0]= 0
[ 18.450000] OFDM_24G_Diff[0][0]= 0
[ 18.460000] BW20_24G_Diff[0][0]= 0
[ 18.460000] BW40_24G_Diff[0][0]= 0
[ 18.470000] ======= TxCount 1 =======
[ 18.490000] CCK_24G_Diff[0][1]= -2
[ 18.490000] OFDM_24G_Diff[0][1]= -2
[ 18.510000] BW20_24G_Diff[0][1]= -2
[ 18.510000] BW40_24G_Diff[0][1]= -2
[ 18.520000] [drm] Initialized drm 1.1.0 20060810
[ 18.530000] ======= TxCount 2 =======
[ 18.540000] CCK_24G_Diff[0][2]= -2
[ 18.540000] OFDM_24G_Diff[0][2]= -2
[ 18.550000] BW20_24G_Diff[0][2]= -2
[ 18.560000] BW40_24G_Diff[0][2]= -2
[ 18.560000] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 18.580000] ======= TxCount 3 =======
[ 18.590000] CCK_24G_Diff[0][3]= -2
[ 18.590000] OFDM_24G_Diff[0][3]= -2
[ 18.600000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 18.610000] BW20_24G_Diff[0][3]= -2
[ 18.620000] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 18.630000] BW40_24G_Diff[0][3]= -2
[ 18.640000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 18.650000] EEPROMRegulatory = 0x0
[ 18.670000] mlmepriv.ChannelPlan = 0x0a
[ 18.670000] EEPROM Customer ID: 0x 0
[ 18.690000] EEPROM : AntDivCfg = 0, TRxAntDivType = 3
[ 18.690000] Board Type: 0x 0
[ 18.710000] ThermalMeter = 0x1a
[ 18.710000] <==== _ReadAdapterInfo8188EU in 1000 ms
[ 18.730000] rtw_macaddr_cfg MAC Address = 00:92:c3:c4:6a:29
[ 18.750000] MAC Address from pnetdev->dev_addr= 00:92:c3:c4:6a:29
[ 18.770000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[ 18.790000] usbcore: registered new interface driver rtl8188eu
[ 18.900000] systemd[1]: Started Load Kernel Modules.
[ 18.900000] systemd[1]: Mounting Configuration File System...
[ 18.940000] systemd[1]: Mounting FUSE Control File System...
[ 19.000000] systemd[1]: Mounted Configuration File System.
[ 19.040000] systemd[1]: Mounted FUSE Control File System.
[ 19.050000] systemd[1]: Starting System Initialization.
[ 19.080000] systemd[1]: Reached target System Initialization.
[ 19.090000] systemd[1]: Starting D-Bus System Message Bus Socket.
[ 19.120000] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 19.130000] systemd[1]: Starting Sockets.
[ 19.160000] systemd[1]: Reached target Sockets.
[ 19.160000] systemd[1]: Starting Restore Sound Card State...
[ 19.200000] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[ 19.220000] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 19.240000] systemd[1]: Starting Basic System.
[ 19.270000] systemd[1]: Reached target Basic System.
[ 19.280000] systemd[1]: Started SSH Key Generation.
[ 19.290000] systemd[1]: Starting OpenSSH Daemon...
[ 19.340000] systemd[1]: Started OpenSSH Daemon.
[ 19.340000] systemd[1]: Starting Music Player Daemon...
[ 19.400000] systemd[1]: Started Music Player Daemon.
[ 19.400000] systemd[1]: Starting Network Manager...
[ 19.440000] systemd[1]: Starting Login Service...
[ 19.470000] systemd[1]: Starting D-Bus System Message Bus...
[ 19.530000] systemd[1]: Started D-Bus System Message Bus.
[ 19.540000] systemd[1]: Starting Permit User Sessions...
[ 19.600000] systemd[1]: Started Restore Sound Card State.
[ 19.630000] systemd[1]: Started Permit User Sessions.
[ 19.640000] systemd[1]: Starting SLiM Simple Login Manager...
[ 19.690000] systemd[1]: Started SLiM Simple Login Manager.
[ 19.700000] systemd[1]: Starting Serial Getty on ttyS0...
[ 19.750000] systemd[1]: Started Serial Getty on ttyS0.
[ 19.750000] systemd[1]: Starting Login Prompts.
[ 19.790000] systemd[1]: Reached target Login Prompts.
[ 20.230000] systemd[1]: Started Login Service.
[ 22.260000] bDriverStopped=1
[ 22.290000] UMP<2>: New session opened
[ 22.300000] +871x_drv - drv_open, bup=0
[ 22.490000] rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
[ 22.590000] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
[ 22.610000] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
[ 22.640000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
[ 23.030000] pDM_Odm TxPowerTrackControl = 1
[ 23.420000] MAC Address from REG_MACID = 00:92:c3:c4:6a:29
[ 23.440000] rtl8188eu_hal_init in 1110ms
[ 23.440000] MAC Address = 00:92:c3:c4:6a:29
[ 23.460000] -871x_drv - drv_open, bup=1
[ 23.480000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.510000] set_mode = IW_MODE_INFRA
[ 23.550000] hw_var_set_opmode()-3434 mode = 2
[ 23.770000] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
[ 23.790000] -871x_drv - drv_close, bup=1
[ 23.800000] +871x_drv - drv_open, bup=1
[ 23.810000] rtl8188e_set_FwJoinBssReport_cmd mstatus(0)
[ 23.830000] -871x_drv - drv_open, bup=1
[ 23.830000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.850000] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
[ 23.870000] -871x_drv - drv_close, bup=1
[ 23.880000] +871x_drv - drv_open, bup=1
[ 23.880000] -871x_drv - drv_open, bup=1
[ 23.900000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.910000] rtl8188e_set_FwJoinBssReport_cmd mstatus(0)
[ 23.930000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 23.930000] set_mode = IW_MODE_INFRA
[ 23.950000] hw_var_set_opmode()-3434 mode = 2
[ 23.960000] =>rtw_wx_set_essid
[ 23.960000] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ, len=32
[ 23.980000] Set SSID under fw_state=0x00000008
[ 24.000000] <=rtw_wx_set_essid, ret 0
[ 24.040000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 25.290000] survey done event(5)
[ 25.310000] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
[ 25.320000] try_to_join, but select scanning queue fail, to_roaming:0
[ 25.660000] IW_SCAN_THIS_ESSID, ssid=CU_Marco, len=8
[ 27.060000] survey done event(a)
[ 27.080000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[ 27.110000] set_mode = IW_MODE_INFRA
[ 27.110000] hw_var_set_opmode()-3434 mode = 2
[ 27.120000]
[ 27.120000] wpa_ie(length:22):
[ 27.140000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
[ 27.140000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
[ 27.160000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x70 0xe6
[ 27.160000] =>rtw_wx_set_essid
[ 27.180000] ssid=CU_Marco, len=8
[ 27.180000] Set SSID under fw_state=0x00000008
[ 27.190000] [by_bssid:0][assoc_ssid:CU_Marco][to_roaming:0] new candidate: CU_Marco(00:90:4c:01:00:21) rssi:-40
[ 27.210000] rtw_select_and_join_from_scanned_queue: candidate: CU_Marco(00:90:4c:01:00:21)
[ 27.220000] link to Broadcom AP
[ 27.260000] link to Broadcom AP
[ 27.260000] issue_deauth to 00:90:4c:01:00:21
[ 27.270000] issue_auth
[ 27.270000] OnAuthClient
[ 27.280000] network.SupportedRates[0]=82
[ 27.280000] network.SupportedRates[1]=84
[ 27.290000] network.SupportedRates[2]=8B
[ 27.300000] network.SupportedRates[3]=96
[ 27.300000] network.SupportedRates[4]=24
[ 27.310000] network.SupportedRates[5]=30
[ 27.320000] network.SupportedRates[6]=48
[ 27.320000] network.SupportedRates[7]=6C
[ 27.330000] network.SupportedRates[8]=0C
[ 27.340000] network.SupportedRates[9]=12
[ 27.340000] network.SupportedRates[10]=18
[ 27.350000] network.SupportedRates[11]=60
[ 27.360000] bssrate_len = 12
[ 27.360000] <=rtw_wx_set_essid, ret 0
[ 27.370000] Set BSSID under fw_state=0x00000088
[ 27.370000] OnAssocRsp
[ 27.380000] report_join_res(1)
[ 27.380000] rtw_joinbss_update_network
[ 27.390000] +rtw_update_ht_cap()
[ 27.390000] rtw_joinbss_update_stainfo
[ 27.400000] ### Set STA_(0) info
[ 27.410000] OnAction_back
[ 27.410000] OnAction_back, action=0
[ 27.410000] issue_action_BA, category=3, action=1, status=0
[ 27.420000] HW_VAR_BASIC_RATE: BrateCfg(0x15f)
[ 27.430000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.450000] WMM(0): 0, a42b
[ 27.450000] WMM(1): 0, a44f
[ 27.470000] WMM(2): 0, 5e4322
[ 27.470000] WMM(3): 0, 2f3222
[ 27.480000]
[ 27.480000] ~~~~stastakey:unicastkey
[ 27.490000] HTOnAssocRsp
[ 27.490000]
[ 27.490000] ~~~~stastakey:groupkey
[ 27.500000] ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
[ 27.510000] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 27.510000] ==> rssi_level:0, rate_bitmap:0x000ff005
[ 27.610000] ### MacID(0),Set Max Tx RPT MID(1)
[ 27.640000] ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
[ 27.670000] rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
[ 27.700000] SetFwRsvdPagePkt
[ 27.700000] SetFwRsvdPagePkt: Set RSVD page location to Fw
[ 27.730000] rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
[ 27.760000] Set RSVD page location to Fw.
[ 27.770000] =>mlmeext_joinbss_event_callback
[ 27.880000] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
[ 27.880000] ==> rssi_level:1, rate_bitmap:0x000f0000
[ 33.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 33.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 34.440000] rtw_set_ps_mode: Leave 802.11 power save
[ 34.460000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 35.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 35.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 37.980000] wlan0: no IPv6 routers present
[ 40.250000] rtw_set_ps_mode: Leave 802.11 power save
[ 40.260000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 41.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 41.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 43.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 43.890000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 45.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 45.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 50.030000] rtw_set_ps_mode: Leave 802.11 power save
[ 50.060000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 51.680000] survey done event(b)
[ 51.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 51.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 93.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 93.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 94.580000] survey done event(8)
[ 95.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 95.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 113.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 113.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 115.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 115.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 156.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 156.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 157.590000] survey done event(6)
[ 157.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 157.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 179.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 179.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 181.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 181.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 239.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 239.020000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 240.580000] survey done event(a)
[ 245.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 245.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 309.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 309.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 311.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 311.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 342.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 342.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 343.590000] survey done event(f)
[ 343.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 343.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 373.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 373.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 375.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 375.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 439.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 439.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 441.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 441.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 462.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 462.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 463.580000] survey done event(c)
[ 463.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 463.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 504.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 504.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 505.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 505.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 568.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 568.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 569.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 569.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 582.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 582.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 583.570000] survey done event(a)
[ 583.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 583.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 633.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 633.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 635.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 635.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 699.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 699.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 701.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 701.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 702.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 702.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 703.570000] survey done event(d)
[ 703.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 703.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 764.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 764.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 765.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 765.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 822.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 822.040000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 823.570000] survey done event(5)
[ 823.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 823.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 829.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 829.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 831.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 831.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 894.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 894.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 895.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 895.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 942.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 942.030000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 943.570000] survey done event(6)
[ 943.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 943.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 960.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 960.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 961.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 961.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 990.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 990.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 991.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 991.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1022.730000] rtw_set_ps_mode: Leave 802.11 power save
[ 1022.740000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1023.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1023.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1025.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1025.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1027.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1027.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1030.740000] rtw_set_ps_mode: Leave 802.11 power save
[ 1030.750000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1035.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1035.880000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1045.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 1045.880000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1047.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1047.880000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1049.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 1049.900000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1051.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1051.880000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1053.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 1053.880000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1055.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1055.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1057.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 1057.890000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1059.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1059.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1061.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 1061.890000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1063.530000] survey done event(8)
[ 1069.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1069.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1092.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1092.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1093.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1093.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1120.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1120.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1121.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1121.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1156.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1156.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1157.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1157.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1182.020000] rtw_set_ps_mode: Leave 802.11 power save
[ 1182.030000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1183.570000] survey done event(3)
[ 1183.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1183.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1186.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1186.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1187.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1187.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1223.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1223.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1225.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1225.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1250.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1250.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1251.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1251.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1288.410000] rtw_set_ps_mode: Leave 802.11 power save
[ 1288.420000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1289.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1289.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1297.470000] rtw_set_ps_mode: Leave 802.11 power save
[ 1297.480000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
[ 1303.530000] survey done event(a)
[ 1313.880000] rtw_set_ps_mode: Enter 802.11 power save
[ 1313.890000] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
[ 1315.880000] rtw_set_ps_mode: Leave 802.11 power save
[ 1315.890000] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0最近编辑记录 tea1111980 (2012-12-03 10:49:53)
离线