您尚未登录。

#1 2024-07-23 21:37:57

DongStar
会员
注册时间: 2024-04-04
帖子: 6

【已解决】dmesg中显示一直重复的错误thermal thermal_zone1: failed to

更新到了6.10.0-arch1-2内核,dmesg日志里一直反复出现thermal thermal_zone1: failed to read out thermal zone (-61)
日志如下
[    0.000000] Linux version 6.10.0-arch1-2 (linux@archlinux) (gcc (GCC) 14.1.1 20240720, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Mon, 22 Jul 2024 17:28:23 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=f6f37ea7-8492-48c7-a435-32d511440f4d rw loglevel=3 nosgx nowatchdog
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d263fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d264000-0x000000007da63fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007da64000-0x000000007db93fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007db94000-0x000000007dd93fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007dd94000-0x000000007ec4dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ec4e000-0x000000007ec4efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ec4f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x78016018-0x7803a657] usable ==> usable
[    0.000000] e820: update [mem 0x78067018-0x78074857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078016017] usable
[    0.000000] reserve setup_data: [mem 0x0000000078016018-0x000000007803a657] usable
[    0.000000] reserve setup_data: [mem 0x000000007803a658-0x0000000078067017] usable
[    0.000000] reserve setup_data: [mem 0x0000000078067018-0x0000000078074857] usable
[    0.000000] reserve setup_data: [mem 0x0000000078074858-0x000000007d263fff] usable
[    0.000000] reserve setup_data: [mem 0x000000007d264000-0x000000007da63fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007da64000-0x000000007db93fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007db94000-0x000000007dd93fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007dd94000-0x000000007ec4dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ec4e000-0x000000007ec4efff] usable
[    0.000000] reserve setup_data: [mem 0x000000007ec4f000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] efi: EFI v2.7 by American Megatrends
[    0.000000] efi: ACPI=0x7dcdb000 ACPI 2.0=0x7dcdb014 TPMFinalLog=0x7dce2000 SMBIOS=0x7e7b3000 SMBIOS 3.0=0x7e7b2000 MEMATTR=0x781c3018 ESRT=0x79f83e18 INITRD=0x781a2918 RNG=0x7db36018 TPMEventLog=0x78075018
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem55: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem56: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem58: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[    0.000000] efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7C82/MAG B460M MORTAR (MS-7C82), BIOS 1.70 08/21/2023
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] tsc: Detected 2900.000 MHz processor
[    0.000000] tsc: Detected 2899.886 MHz TSC
[    0.000354] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000357] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000368] last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[    0.000372] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000374] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000766] last_pfn = 0x7ec4f max_arch_pfn = 0x400000000
[    0.013236] esrt: Reserving ESRT space from 0x0000000079f83e18 to 0x0000000079f83e50.
[    0.013242] e820: update [mem 0x79f83000-0x79f83fff] usable ==> reserved
[    0.013262] Using GB pages for direct mapping
[    0.013668] Secure boot disabled
[    0.013669] RAMDISK: [mem 0x6e1de000-0x7435efff]
[    0.013691] ACPI: Early table checksum verification disabled
[    0.013694] ACPI: RSDP 0x000000007DCDB014 000024 (v02 ALASKA)
[    0.013698] ACPI: XSDT 0x000000007DCDA728 0000D4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013703] ACPI: FACP 0x000000007DB8C000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.013709] ACPI: DSDT 0x000000007DB55000 036D5F (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.013712] ACPI: FACS 0x000000007DD93000 000040
[    0.013715] ACPI: MCFG 0x000000007DB91000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.013718] ACPI: SSDT 0x000000007DB8E000 0020AD (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.013721] ACPI: SSDT 0x000000007DB8D000 000A52 (v02 PmRef  ItbmSci  00003000 INTL 20160527)
[    0.013725] ACPI: FIDT 0x000000007DB54000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013728] ACPI: SSDT 0x000000007DB50000 0031DA (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.013731] ACPI: SSDT 0x000000007DB4D000 00276E (v02 Intel  PegSsdt  00001000 INTL 20160527)
[    0.013734] ACPI: HPET 0x000000007DB93000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013737] ACPI: SSDT 0x000000007DB4B000 00147B (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.013740] ACPI: SSDT 0x000000007DB47000 0032E6 (v02 INTEL  xh_cmvd4 00000000 INTL 20160527)
[    0.013743] ACPI: NHLT 0x000000007DB92000 00002D (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.013746] ACPI: LPIT 0x000000007DB46000 000094 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013750] ACPI: SSDT 0x000000007DB42000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.013753] ACPI: SSDT 0x000000007DB3F000 0025B2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.013756] ACPI: DBGP 0x000000007DB3E000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.013759] ACPI: DBG2 0x000000007DB3D000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.013762] ACPI: SSDT 0x000000007DB3B000 001C3F (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[    0.013765] ACPI: FPDT 0x000000007DB3A000 000044 (v01 ALASKA CML      01072009 AMI  01000013)
[    0.013768] ACPI: TPM2 0x000000007DB39000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
[    0.013771] ACPI: WSMT 0x000000007DB45000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013775] ACPI: APIC 0x000000007DB37000 00012C (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.013778] ACPI: BGRT 0x000000007DB38000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.013780] ACPI: Reserving FACP table memory at [mem 0x7db8c000-0x7db8c113]
[    0.013782] ACPI: Reserving DSDT table memory at [mem 0x7db55000-0x7db8bd5e]
[    0.013783] ACPI: Reserving FACS table memory at [mem 0x7dd93000-0x7dd9303f]
[    0.013784] ACPI: Reserving MCFG table memory at [mem 0x7db91000-0x7db9103b]
[    0.013785] ACPI: Reserving SSDT table memory at [mem 0x7db8e000-0x7db900ac]
[    0.013786] ACPI: Reserving SSDT table memory at [mem 0x7db8d000-0x7db8da51]
[    0.013786] ACPI: Reserving FIDT table memory at [mem 0x7db54000-0x7db5409b]
[    0.013787] ACPI: Reserving SSDT table memory at [mem 0x7db50000-0x7db531d9]
[    0.013788] ACPI: Reserving SSDT table memory at [mem 0x7db4d000-0x7db4f76d]
[    0.013789] ACPI: Reserving HPET table memory at [mem 0x7db93000-0x7db93037]
[    0.013790] ACPI: Reserving SSDT table memory at [mem 0x7db4b000-0x7db4c47a]
[    0.013791] ACPI: Reserving SSDT table memory at [mem 0x7db47000-0x7db4a2e5]
[    0.013792] ACPI: Reserving NHLT table memory at [mem 0x7db92000-0x7db9202c]
[    0.013793] ACPI: Reserving LPIT table memory at [mem 0x7db46000-0x7db46093]
[    0.013794] ACPI: Reserving SSDT table memory at [mem 0x7db42000-0x7db4471f]
[    0.013795] ACPI: Reserving SSDT table memory at [mem 0x7db3f000-0x7db415b1]
[    0.013796] ACPI: Reserving DBGP table memory at [mem 0x7db3e000-0x7db3e033]
[    0.013796] ACPI: Reserving DBG2 table memory at [mem 0x7db3d000-0x7db3d053]
[    0.013797] ACPI: Reserving SSDT table memory at [mem 0x7db3b000-0x7db3cc3e]
[    0.013798] ACPI: Reserving FPDT table memory at [mem 0x7db3a000-0x7db3a043]
[    0.013799] ACPI: Reserving TPM2 table memory at [mem 0x7db39000-0x7db3904b]
[    0.013800] ACPI: Reserving WSMT table memory at [mem 0x7db45000-0x7db45027]
[    0.013801] ACPI: Reserving APIC table memory at [mem 0x7db37000-0x7db3712b]
[    0.013802] ACPI: Reserving BGRT table memory at [mem 0x7db38000-0x7db38037]
[    0.013905] No NUMA configuration found
[    0.013906] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[    0.013910] NODE_DATA(0) allocated [mem 0x47effb000-0x47effffff]
[    0.013943] Zone ranges:
[    0.013944]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013946]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013948]   Normal   [mem 0x0000000100000000-0x000000047effffff]
[    0.013949]   Device   empty
[    0.013950] Movable zone start for each node
[    0.013951] Early memory node ranges
[    0.013952]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.013953]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.013954]   node   0: [mem 0x0000000000100000-0x000000007d263fff]
[    0.013955]   node   0: [mem 0x000000007ec4e000-0x000000007ec4efff]
[    0.013956]   node   0: [mem 0x0000000100000000-0x000000047effffff]
[    0.013959] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[    0.013965] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013966] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013995] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.017553] On node 0, zone DMA32: 6634 pages in unavailable ranges
[    0.042690] On node 0, zone Normal: 5041 pages in unavailable ranges
[    0.042747] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.042920] ACPI: PM-Timer IO Port: 0x1808
[    0.042929] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.042931] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.042932] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.042933] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.042934] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.042934] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.042935] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.042936] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.042937] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.042938] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.042939] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.042939] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.042940] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.042941] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.042942] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.042943] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.042969] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.042972] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042974] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.042978] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.042979] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.042986] e820: update [mem 0x78129000-0x78185fff] usable ==> reserved
[    0.043000] TSC deadline timer available
[    0.043005] CPU topo: Max. logical packages:   1
[    0.043006] CPU topo: Max. logical dies:       1
[    0.043007] CPU topo: Max. dies per package:   1
[    0.043011] CPU topo: Max. threads per core:   2
[    0.043012] CPU topo: Num. cores per package:     8
[    0.043013] CPU topo: Num. threads per package:  16
[    0.043014] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.043031] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.043033] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.043035] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.043036] PM: hibernation: Registered nosave memory: [mem 0x78016000-0x78016fff]
[    0.043038] PM: hibernation: Registered nosave memory: [mem 0x7803a000-0x7803afff]
[    0.043040] PM: hibernation: Registered nosave memory: [mem 0x78067000-0x78067fff]
[    0.043042] PM: hibernation: Registered nosave memory: [mem 0x78074000-0x78074fff]
[    0.043044] PM: hibernation: Registered nosave memory: [mem 0x78129000-0x78185fff]
[    0.043045] PM: hibernation: Registered nosave memory: [mem 0x79f83000-0x79f83fff]
[    0.043047] PM: hibernation: Registered nosave memory: [mem 0x7d264000-0x7da63fff]
[    0.043048] PM: hibernation: Registered nosave memory: [mem 0x7da64000-0x7db93fff]
[    0.043049] PM: hibernation: Registered nosave memory: [mem 0x7db94000-0x7dd93fff]
[    0.043050] PM: hibernation: Registered nosave memory: [mem 0x7dd94000-0x7ec4dfff]
[    0.043051] PM: hibernation: Registered nosave memory: [mem 0x7ec4f000-0x7fffffff]
[    0.043052] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xfdffffff]
[    0.043053] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.043054] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.043055] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.043055] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.043056] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.043057] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.043058] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.043058] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.043060] [mem 0x80000000-0xfdffffff] available for PCI devices
[    0.043061] Booting paravirtualized kernel on bare hardware
[    0.043063] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.049650] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.050501] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.050509] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.050511] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[    0.050517] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[    0.050539] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=f6f37ea7-8492-48c7-a435-32d511440f4d rw loglevel=3 nosgx nowatchdog
[    0.050613] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[    0.051828] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.052433] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.052629] Fallback order for Node 0: 0
[    0.052633] Built 1 zonelists, mobility grouping on.  Total pages: 4178435
[    0.052634] Policy zone: Normal
[    0.052814] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.052818] software IO TLB: area num 16.
[    0.096244] Memory: 16115724K/16713740K available (18432K kernel code, 2177K rwdata, 13436K rodata, 3432K init, 3492K bss, 597756K reserved, 0K cma-reserved)
[    0.096505] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.096552] ftrace: allocating 50263 entries in 197 pages
[    0.104791] ftrace: allocated 197 pages with 4 groups
[    0.104863] Dynamic Preempt: full
[    0.104930] rcu: Preemptible hierarchical RCU implementation.
[    0.104931] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.104933] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.104934]     Trampoline variant of Tasks RCU enabled.
[    0.104934]     Rude variant of Tasks RCU enabled.
[    0.104935]     Tracing variant of Tasks RCU enabled.
[    0.104936] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.104936] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.104947] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.104949] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.104950] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.109733] NR_IRQS: 20736, nr_irqs: 2184, preallocated irqs: 16
[    0.109962] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.110185] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.110224] Console: colour dummy device 80x25
[    0.110226] printk: legacy console [tty0] enabled
[    0.110281] ACPI: Core revision 20240322
[    0.110575] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.110644] APIC: Switch to symmetric I/O mode setup
[    0.111845] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.112120] APIC: Switched APIC routing to: physical flat
[    0.116198] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.130644] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[    0.130649] Calibrating delay loop (skipped), value calculated using timer frequency.. 5802.42 BogoMIPS (lpj=9666286)
[    0.130673] CPU0: Thermal monitoring enabled (TM1)
[    0.130727] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.130728] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.130731] process: using mwait in idle threads
[    0.130733] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.130735] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on vm exit
[    0.130735] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall
[    0.130736] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.130737] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.130738] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.130738] RETBleed: Mitigation: Enhanced IBRS
[    0.130740] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.130741] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.130746] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.130747] SRBDS: Mitigation: Microcode
[    0.130749] GDS: Mitigation: Microcode
[    0.130755] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.130756] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.130757] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.130758] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.130758] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.130759] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.130761] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.130762] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.130763] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.130764] x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
[    0.130765] x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
[    0.154513] Freeing SMP alternatives memory: 40K
[    0.154516] pid_max: default: 32768 minimum: 301
[    0.157345] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.157368] landlock: Up and running.
[    0.157369] Yama: becoming mindful.
[    0.157373] LSM support for eBPF active
[    0.157410] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.157427] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.158005] smpboot: CPU0: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz (family: 0x6, model: 0xa5, stepping: 0x5)
[    0.158171] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.158192] ... version:                4
[    0.158193] ... bit width:              48
[    0.158194] ... generic registers:      4
[    0.158195] ... value mask:             0000ffffffffffff
[    0.158196] ... max period:             00007fffffffffff
[    0.158197] ... fixed-purpose events:   3
[    0.158197] ... event mask:             000000070000000f
[    0.158304] signal: max sigframe size: 3632
[    0.158316] Estimated ratio of average max frequency by base frequency (times 1024): 1659
[    0.159526] rcu: Hierarchical SRCU implementation.
[    0.159527] rcu:     Max phase no-delay instances is 1000.
[    0.160219] smp: Bringing up secondary CPUs ...
[    0.160299] smpboot: x86: Booting SMP configuration:
[    0.160300] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.165424] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/ … _data.html for more details.
[    0.165424] smp: Brought up 1 node, 16 CPUs
[    0.165424] smpboot: Total of 16 processors activated (92833.86 BogoMIPS)
[    0.167798] devtmpfs: initialized
[    0.167798] x86/mm: Memory block size: 128MB
[    0.168585] ACPI: PM: Registering ACPI NVS region [mem 0x7db94000-0x7dd93fff] (2097152 bytes)
[    0.168585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.168585] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.168585] pinctrl core: initialized pinctrl subsystem
[    0.168585] PM: RTC time: 13:24:46, date: 2024-07-23
[    0.168585] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.168585] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.168585] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.168595] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.168602] audit: initializing netlink subsys (disabled)
[    0.168611] audit: type=2000 audit(1721741085.056:1): state=initialized audit_enabled=0 res=1
[    0.168611] thermal_sys: Registered thermal governor 'fair_share'
[    0.168611] thermal_sys: Registered thermal governor 'bang_bang'
[    0.168611] thermal_sys: Registered thermal governor 'step_wise'
[    0.168611] thermal_sys: Registered thermal governor 'user_space'
[    0.168611] thermal_sys: Registered thermal governor 'power_allocator'
[    0.168611] cpuidle: using governor ladder
[    0.168611] cpuidle: using governor menu
[    0.170672] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.170674] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.170757] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.170769] PCI: Using configuration type 1 for base access
[    0.170876] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.177471] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.177471] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.177471] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.177471] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.177560] Demotion targets for Node 0: null
[    0.177739] ACPI: Added _OSI(Module Device)
[    0.177739] ACPI: Added _OSI(Processor Device)
[    0.177739] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177739] ACPI: Added _OSI(Processor Aggregator Device)
[    0.226925] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.234834] ACPI: Dynamic OEM Table Load:
[    0.234834] ACPI: SSDT 0xFFFF89A3C1324C00 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.235373] ACPI: Dynamic OEM Table Load:
[    0.235379] ACPI: SSDT 0xFFFF89A3C134F000 0005E4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.236355] ACPI: Dynamic OEM Table Load:
[    0.236360] ACPI: SSDT 0xFFFF89A3C1395400 0000FC (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.238117] ACPI: Dynamic OEM Table Load:
[    0.238122] ACPI: SSDT 0xFFFF89A3C13D5800 00016C (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.238999] ACPI: Dynamic OEM Table Load:
[    0.239005] ACPI: SSDT 0xFFFF89A3C132E000 000BEA (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.240430] ACPI: Dynamic OEM Table Load:
[    0.240436] ACPI: SSDT 0xFFFF89A3C134D000 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.241493] ACPI: Dynamic OEM Table Load:
[    0.241499] ACPI: SSDT 0xFFFF89A3C1323C00 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.242529] ACPI: Dynamic OEM Table Load:
[    0.242535] ACPI: SSDT 0xFFFF89A3C132A000 000D22 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.244199] ACPI: Dynamic OEM Table Load:
[    0.244205] ACPI: SSDT 0xFFFF89A3C1325000 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.250513] ACPI: _OSC evaluated successfully for all CPUs
[    0.251461] ACPI: Interpreter enabled
[    0.251501] ACPI: PM: (supports S0 S3 S4 S5)
[    0.251502] ACPI: Using IOAPIC for interrupt routing
[    0.252676] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.252677] PCI: Ignoring E820 reservations for host bridge windows
[    0.253707] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.259577] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[    0.259660] ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
[    0.269176] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.269384] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.269581] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.282553] ACPI: \_TZ_.FN00: New power resource
[    0.282621] ACPI: \_TZ_.FN01: New power resource
[    0.282685] ACPI: \_TZ_.FN02: New power resource
[    0.282748] ACPI: \_TZ_.FN03: New power resource
[    0.282811] ACPI: \_TZ_.FN04: New power resource
[    0.283220] ACPI: \PIN_: New power resource
[    0.283662] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.283669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.283778] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.283975] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC]
[    0.283977] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.284934] PCI host bridge to bus 0000:00
[    0.284937] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.284939] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.284940] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.284942] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.284944] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.284945] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.284946] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfdffffff window]
[    0.284947] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.285032] pci 0000:00:00.0: [8086:9b43] type 00 class 0x060000 conventional PCI endpoint
[    0.285099] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[    0.285111] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.285114] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.285116] pci 0000:00:01.0:   bridge window [mem 0x81000000-0x820fffff]
[    0.285121] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4201ffffff 64bit pref]
[    0.285148] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.285668] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 conventional PCI endpoint
[    0.285677] pci 0000:00:08.0: BAR 0 [mem 0x4202027000-0x4202027fff 64bit]
[    0.285780] pci 0000:00:14.0: [8086:a3af] type 00 class 0x0c0330 conventional PCI endpoint
[    0.285795] pci 0000:00:14.0: BAR 0 [mem 0x4202010000-0x420201ffff 64bit]
[    0.285852] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.286624] pci 0000:00:14.2: [8086:a3b1] type 00 class 0x118000 conventional PCI endpoint
[    0.286639] pci 0000:00:14.2: BAR 0 [mem 0x4202026000-0x4202026fff 64bit]
[    0.286748] pci 0000:00:16.0: [8086:a3ba] type 00 class 0x078000 conventional PCI endpoint
[    0.286767] pci 0000:00:16.0: BAR 0 [mem 0x4202025000-0x4202025fff 64bit]
[    0.286833] pci 0000:00:16.0: PME# supported from D3hot
[    0.287320] pci 0000:00:17.0: [8086:a382] type 00 class 0x010601 conventional PCI endpoint
[    0.287332] pci 0000:00:17.0: BAR 0 [mem 0x82404000-0x82405fff]
[    0.287339] pci 0000:00:17.0: BAR 1 [mem 0x82407000-0x824070ff]
[    0.287345] pci 0000:00:17.0: BAR 2 [io  0x5050-0x5057]
[    0.287351] pci 0000:00:17.0: BAR 3 [io  0x5040-0x5043]
[    0.287358] pci 0000:00:17.0: BAR 4 [io  0x5020-0x503f]
[    0.287364] pci 0000:00:17.0: BAR 5 [mem 0x82406000-0x824067ff]
[    0.287400] pci 0000:00:17.0: PME# supported from D3hot
[    0.287488] pci 0000:00:1c.0: [8086:a393] type 01 class 0x060400 PCIe Root Port
[    0.287506] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.287509] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.287512] pci 0000:00:1c.0:   bridge window [mem 0x82300000-0x823fffff]
[    0.287563] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.288025] pci 0000:00:1c.4: [8086:a394] type 01 class 0x060400 PCIe Root Port
[    0.288044] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.288048] pci 0000:00:1c.4:   bridge window [mem 0x82200000-0x822fffff]
[    0.288100] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.288550] pci 0000:00:1d.0: [8086:a398] type 01 class 0x060400 PCIe Root Port
[    0.288568] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.288573] pci 0000:00:1d.0:   bridge window [mem 0x82100000-0x821fffff]
[    0.288624] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.289091] pci 0000:00:1f.0: [8086:a3c8] type 00 class 0x060100 conventional PCI endpoint
[    0.289431] pci 0000:00:1f.2: [8086:a3a1] type 00 class 0x058000 conventional PCI endpoint
[    0.289443] pci 0000:00:1f.2: BAR 0 [mem 0x82400000-0x82403fff]
[    0.289708] pci 0000:00:1f.3: [8086:a3f0] type 00 class 0x040300 conventional PCI endpoint
[    0.289727] pci 0000:00:1f.3: BAR 0 [mem 0x4202020000-0x4202023fff 64bit]
[    0.289750] pci 0000:00:1f.3: BAR 4 [mem 0x4202000000-0x420200ffff 64bit]
[    0.289793] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.290906] pci 0000:00:1f.4: [8086:a3a3] type 00 class 0x0c0500 conventional PCI endpoint
[    0.290963] pci 0000:00:1f.4: BAR 0 [mem 0x4202024000-0x42020240ff 64bit]
[    0.291033] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.291354] pci 0000:01:00.0: [10de:2482] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.291363] pci 0000:01:00.0: BAR 0 [mem 0x81000000-0x81ffffff]
[    0.291371] pci 0000:01:00.0: BAR 1 [mem 0x4000000000-0x41ffffffff 64bit pref]
[    0.291378] pci 0000:01:00.0: BAR 3 [mem 0x4200000000-0x4201ffffff 64bit pref]
[    0.291382] pci 0000:01:00.0: BAR 5 [io  0x4000-0x407f]
[    0.291387] pci 0000:01:00.0: ROM [mem 0x82000000-0x8207ffff pref]
[    0.291406] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.291434] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.291477] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.291560] pci 0000:01:00.1: [10de:228b] type 00 class 0x040300 PCIe Endpoint
[    0.291568] pci 0000:01:00.1: BAR 0 [mem 0x82080000-0x82083fff]
[    0.291665] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.291744] pci 0000:02:00.0: [10ec:8125] type 00 class 0x020000 PCIe Endpoint
[    0.291759] pci 0000:02:00.0: BAR 0 [io  0x3000-0x30ff]
[    0.291777] pci 0000:02:00.0: BAR 2 [mem 0x82300000-0x8230ffff 64bit]
[    0.291789] pci 0000:02:00.0: BAR 4 [mem 0x82310000-0x82313fff 64bit]
[    0.291894] pci 0000:02:00.0: supports D1 D2
[    0.291896] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.292084] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.292169] pci 0000:03:00.0: [8086:2723] type 00 class 0x028000 PCIe Endpoint
[    0.292191] pci 0000:03:00.0: BAR 0 [mem 0x82200000-0x82203fff 64bit]
[    0.292311] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.292513] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.292589] pci 0000:04:00.0: [15b7:5006] type 00 class 0x010802 PCIe Endpoint
[    0.292608] pci 0000:04:00.0: BAR 0 [mem 0x82100000-0x82103fff 64bit]
[    0.292633] pci 0000:04:00.0: BAR 4 [mem 0x82104000-0x821040ff 64bit]
[    0.292836] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.296063] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.296157] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.296249] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.296341] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.296432] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.296523] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.296614] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.296705] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.300459] iommu: Default domain type: Translated
[    0.300459] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.300459] SCSI subsystem initialized
[    0.300459] libata version 3.00 loaded.
[    0.300459] ACPI: bus type USB registered
[    0.300459] usbcore: registered new interface driver usbfs
[    0.300459] usbcore: registered new interface driver hub
[    0.300459] usbcore: registered new device driver usb
[    0.300670] EDAC MC: Ver: 3.0.0
[    0.300731] efivars: Registered efivars operations
[    0.300829] NetLabel: Initializing
[    0.300831] NetLabel:  domain hash size = 128
[    0.300832] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.300847] NetLabel:  unlabeled traffic allowed by default
[    0.300851] mctp: management component transport protocol core
[    0.300852] NET: Registered PF_MCTP protocol family
[    0.300855] PCI: Using ACPI for IRQ routing
[    0.328825] PCI: pci_cache_line_size set to 64 bytes
[    0.328872] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.328874] e820: reserve RAM buffer [mem 0x78016018-0x7bffffff]
[    0.328875] e820: reserve RAM buffer [mem 0x78067018-0x7bffffff]
[    0.328876] e820: reserve RAM buffer [mem 0x78129000-0x7bffffff]
[    0.328878] e820: reserve RAM buffer [mem 0x79f83000-0x7bffffff]
[    0.328878] e820: reserve RAM buffer [mem 0x7d264000-0x7fffffff]
[    0.328880] e820: reserve RAM buffer [mem 0x7ec4f000-0x7fffffff]
[    0.328880] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[    0.328924] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.328924] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.328924] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.328924] vgaarb: loaded
[    0.328924] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.328924] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.330690] clocksource: Switched to clocksource tsc-early
[    0.331135] VFS: Disk quotas dquot_6.6.0
[    0.331143] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.331205] pnp: PnP ACPI init
[    0.331468] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.331471] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.331472] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.331629] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.331631] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.331749] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.331841] system 00:03: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.331844] system 00:03: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.331845] system 00:03: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.331847] system 00:03: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.331848] system 00:03: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.331850] system 00:03: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.332158] system 00:04: [io  0x2000-0x20fe] has been reserved
[    0.332737] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.332739] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.332741] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.332742] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.332744] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.332745] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.332747] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.332748] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.333121] system 00:06: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.333580] pnp: PnP ACPI: found 7 devices
[    0.338998] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.339049] NET: Registered PF_INET protocol family
[    0.339187] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.352053] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.352075] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.352114] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.352340] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.352575] TCP: Hash tables configured (established 131072 bind 65536)
[    0.352650] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.352702] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.352740] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.352791] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.352796] NET: Registered PF_XDP protocol family
[    0.352804] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.352807] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.352810] pci 0000:00:01.0:   bridge window [mem 0x81000000-0x820fffff]
[    0.352812] pci 0000:00:01.0:   bridge window [mem 0x4000000000-0x4201ffffff 64bit pref]
[    0.352816] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.352818] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.352821] pci 0000:00:1c.0:   bridge window [mem 0x82300000-0x823fffff]
[    0.352826] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.352829] pci 0000:00:1c.4:   bridge window [mem 0x82200000-0x822fffff]
[    0.352833] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.352836] pci 0000:00:1d.0:   bridge window [mem 0x82100000-0x821fffff]
[    0.352841] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.352843] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.352844] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.352846] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    0.352847] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
[    0.352848] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[    0.352850] pci_bus 0000:00: resource 10 [mem 0xfc800000-0xfdffffff window]
[    0.352851] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.352852] pci_bus 0000:01: resource 1 [mem 0x81000000-0x820fffff]
[    0.352853] pci_bus 0000:01: resource 2 [mem 0x4000000000-0x4201ffffff 64bit pref]
[    0.352855] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.352856] pci_bus 0000:02: resource 1 [mem 0x82300000-0x823fffff]
[    0.352857] pci_bus 0000:03: resource 1 [mem 0x82200000-0x822fffff]
[    0.352858] pci_bus 0000:04: resource 1 [mem 0x82100000-0x821fffff]
[    0.353029] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    0.353049] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.353082] PCI: CLS 64 bytes, default 64
[    0.353119] pci 0000:00:1f.1: [8086:a3a0] type 00 class 0x058000 conventional PCI endpoint
[    0.353176] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[    0.353387] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.353388] software IO TLB: mapped [mem 0x000000006a1de000-0x000000006e1de000] (64MB)
[    0.353421] Trying to unpack rootfs image as initramfs...
[    0.353439] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.354963] Initialise system trusted keyrings
[    0.354972] Key type blacklist registered
[    0.355005] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.355014] zbud: loaded
[    0.355122] fuse: init (API version 7.40)
[    0.355205] integrity: Platform Keyring initialized
[    0.355208] integrity: Machine keyring initialized
[    0.372295] Key type asymmetric registered
[    0.372300] Asymmetric key parser 'x509' registered
[    0.372335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.372386] io scheduler mq-deadline registered
[    0.372388] io scheduler kyber registered
[    0.372403] io scheduler bfq registered
[    0.381416] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.381671] Monitor-Mwait will be used to enter C-1 state
[    0.381679] Monitor-Mwait will be used to enter C-2 state
[    0.381683] ACPI: \_SB_.PR00: Found 2 idle states
[    0.382134] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.382154] ACPI: button: Sleep Button [SLPB]
[    0.382178] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.382191] ACPI: button: Power Button [PWRB]
[    0.382212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.383963] ACPI: button: Power Button [PWRF]
[    0.385408] thermal LNXTHERM:00: registered as thermal_zone0
[    0.385411] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.385590] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.385948] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.387481] Non-volatile memory driver v1.3
[    0.387483] Linux agpgart interface v0.103
[    0.482422] Freeing initrd memory: 99844K
[    0.559981] ACPI: bus type drm_connector registered
[    0.562226] ahci 0000:00:17.0: version 3.0
[    0.572495] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    0.572499] ahci 0000:00:17.0: 6/6 ports implemented (port mask 0x3f)
[    0.572501] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    0.621080] scsi host0: ahci
[    0.621359] scsi host1: ahci
[    0.621636] scsi host2: ahci
[    0.621806] scsi host3: ahci
[    0.621900] scsi host4: ahci
[    0.622000] scsi host5: ahci
[    0.622026] ata1: SATA max UDMA/133 abar m2048@0x82406000 port 0x82406100 irq 124 lpm-pol 3
[    0.622028] ata2: SATA max UDMA/133 abar m2048@0x82406000 port 0x82406180 irq 124 lpm-pol 3
[    0.622030] ata3: SATA max UDMA/133 abar m2048@0x82406000 port 0x82406200 irq 124 lpm-pol 3
[    0.622031] ata4: SATA max UDMA/133 abar m2048@0x82406000 port 0x82406280 irq 124 lpm-pol 3
[    0.622033] ata5: SATA max UDMA/133 abar m2048@0x82406000 port 0x82406300 irq 124 lpm-pol 3
[    0.622034] ata6: SATA max UDMA/133 abar m2048@0x82406000 port 0x82406380 irq 124 lpm-pol 3
[    0.622113] usbcore: registered new interface driver usbserial_generic
[    0.622117] usbserial: USB Serial support registered for generic
[    0.622201] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.622858] rtc_cmos rtc_cmos: registered as rtc0
[    0.622984] rtc_cmos rtc_cmos: setting system clock to 2024-07-23T13:24:46 UTC (1721741086)
[    0.623003] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.623436] intel_pstate: Intel P-state driver initializing
[    0.624151] intel_pstate: HWP enabled
[    0.624484] ledtrig-cpu: registered to indicate activity on CPUs
[    0.624705] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.625404] fbcon: Deferring console take-over
[    0.625405] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.625431] hid: raw HID events driver (C) Jiri Kosina
[    0.625462] drop_monitor: Initializing network drop monitor service
[    0.625519] NET: Registered PF_INET6 protocol family
[    0.628560] Segment Routing with IPv6
[    0.628560] RPL Segment Routing with IPv6
[    0.628565] In-situ OAM (IOAM) with IPv6
[    0.628576] NET: Registered PF_PACKET protocol family
[    0.629381] microcode: Current revision: 0x000000fa
[    0.629382] microcode: Updated early from: 0x000000f8
[    0.629837] IPI shorthand broadcast: enabled
[    0.630857] sched_clock: Marking stable (630000994, 560831)->(637569452, -7007627)
[    0.630982] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.631366] registered taskstats version 1
[    0.632007] Loading compiled-in X.509 certificates
[    0.633806] Loaded X.509 cert 'Build time autogenerated kernel key: 4be1f20f0791feae47ce4c2507da83ec4b4098a6'
[    0.636566] zswap: loaded using pool zstd/zsmalloc
[    0.636596] Demotion targets for Node 0: null
[    0.636718] Key type .fscrypt registered
[    0.636719] Key type fscrypt-provisioning registered
[    0.636863] integrity: Loading X.509 certificate: UEFI:db
[    0.636879] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.636879] integrity: Loading X.509 certificate: UEFI:db
[    0.636888] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.636889] integrity: Loading X.509 certificate: UEFI:db
[    0.636897] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272'
[    0.636898] integrity: Loading X.509 certificate: UEFI:db
[    0.636905] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d'
[    0.636906] integrity: Loading X.509 certificate: UEFI:db
[    0.636911] integrity: Loaded X.509 cert 'MSI SHIP DB: ebc30d5be5f35f8041c1c2d9e613eee2'
[    0.637606] PM:   Magic number: 0:488:433
[    0.639654] RAS: Correctable Errors collector initialized.
[    0.645714] clk: Disabling unused clocks
[    0.645715] PM: genpd: Disabling unused power domains
[    0.934626] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.934658] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.934692] ata4: SATA link down (SStatus 4 SControl 300)
[    0.934725] ata5: SATA link down (SStatus 4 SControl 300)
[    0.934757] ata6: SATA link down (SStatus 4 SControl 300)
[    0.934790] ata2: SATA link down (SStatus 4 SControl 300)
[    0.935308] ata1.00: ATA-10: WDC WD1003FZEX-00K3CA0, 01.01A01, max UDMA/133
[    0.935977] ata3.00: ATA-8: ST500DM002-1BD142, KC65, max UDMA/100
[    0.935989] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[    0.936550] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.936564] ata1.00: Features: NCQ-prio
[    0.937557] ata3.00: configured for UDMA/100
[    0.938416] ata1.00: configured for UDMA/133
[    0.938498] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
[    0.938696] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.938697] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.938701] sd 0:0:0:0: [sda] Write Protect is off
[    0.938702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.938707] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.938715] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.938727] scsi 2:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC65 PQ: 0 ANSI: 5
[    0.938956] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    0.938958] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    0.938961] sd 2:0:0:0: [sdb] Write Protect is off
[    0.938962] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.938966] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.938974] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    0.989294]  sda: sda1 sda2 sda3
[    0.989537] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.992527]  sdb: sdb1 sdb2 sdb3 sdb4
[    0.992931] sd 2:0:0:0: [sdb] Attached SCSI disk
[    0.994582] Freeing unused decrypted memory: 2028K
[    0.995372] Freeing unused kernel image (initmem) memory: 3432K
[    0.995395] Write protecting the kernel read-only data: 32768k
[    0.996245] Freeing unused kernel image (rodata/data gap) memory: 900K
[    1.003732] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.003735] rodata_test: all tests were successful
[    1.003737] Run /init as init process
[    1.003737]   with arguments:
[    1.003738]     /init
[    1.003739]   with environment:
[    1.003739]     HOME=/
[    1.003740]     TERM=linux
[    1.003740]     BOOT_IMAGE=/vmlinuz-linux
[    1.021583] fbcon: Taking over console
[    1.025635] Console: switching to colour frame buffer device 160x45
[    1.105145] nvidia: loading out-of-tree module taints kernel.
[    1.105150] nvidia: module license 'NVIDIA' taints kernel.
[    1.105151] Disabling lock debugging due to kernel taint
[    1.105153] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.105153] nvidia: module license taints kernel.
[    1.243647] nvidia-nvlink: Nvlink Core is being initialized, major device number 241

[    1.244582] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.286783] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  555.58.02  Tue Jun 25 01:39:15 UTC 2024
[    1.300259] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  555.58.02  Tue Jun 25 01:10:21 UTC 2024
[    1.307030] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[    1.363945] tsc: Refined TSC clocksource calibration: 2903.999 MHz
[    1.363948] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc050a48e, max_idle_ns: 440795325698 ns
[    1.364012] clocksource: Switched to clocksource tsc
[    1.385114] nvidia-uvm: Loaded the UVM driver, major device number 239.
[    1.386364] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    2.738639] resource: resource sanity check: requesting [mem 0x00000000000c8000-0x00000000000effff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000fffff window]
[    2.738642] caller _nv000733rm+0x11e/0x255 [nvidia] mapping multiple BARs
[    3.012450] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    3.023968] Console: switching to colour dummy device 80x25
[    3.084834] nvidia 0000:01:00.0: vgaarb: deactivate vga console
[    3.136045] fbcon: nvidia-drmdrmfb (fb0) is primary device
[    3.268258] Console: switching to colour frame buffer device 160x45
[    3.281073] nvidia 0000:01:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
[    3.377514] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.377519] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.378586] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[    3.378888] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.378890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.378892] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    3.378914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    3.378916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.378917] usb usb1: Product: xHCI Host Controller
[    3.378918] usb usb1: Manufacturer: Linux 6.10.0-arch1-2 xhci-hcd
[    3.378918] usb usb1: SerialNumber: 0000:00:14.0
[    3.379008] hub 1-0:1.0: USB hub found
[    3.379019] hub 1-0:1.0: 12 ports detected
[    3.380733] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[    3.380736] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.380738] usb usb2: Product: xHCI Host Controller
[    3.380739] usb usb2: Manufacturer: Linux 6.10.0-arch1-2 xhci-hcd
[    3.380740] usb usb2: SerialNumber: 0000:00:14.0
[    3.380804] hub 2-0:1.0: USB hub found
[    3.380815] hub 2-0:1.0: 8 ports detected
[    3.385718] nvme 0000:04:00.0: platform quirk: setting simple suspend
[    3.385759] nvme nvme0: pci function 0000:04:00.0
[    3.393330] nvme nvme0: 16/0/0 default/read/poll queues
[    3.396627]  nvme0n1: p1 p2 p3 p4
[    3.630647] usb 1-9: new full-speed USB device number 2 using xhci_hcd
[    3.778989] usb 1-9: New USB device found, idVendor=0b05, idProduct=195c, bcdDevice= 2.03
[    3.779002] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.779008] usb 1-9: Product: ROG KERIS
[    3.779012] usb 1-9: Manufacturer: ASUSTeK
[    3.803946] usbcore: registered new interface driver usbhid
[    3.803956] usbhid: USB HID core driver
[    3.817200] hid-generic 0003:0B05:195C.0001: hiddev96,hidraw0: USB HID v1.11 Device [ASUSTeK ROG KERIS] on usb-0000:00:14.0-9/input0
[    3.817529] input: ASUSTeK ROG KERIS as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:0B05:195C.0002/input/input3
[    3.817756] hid-generic 0003:0B05:195C.0002: input,hidraw1: USB HID v1.11 Mouse [ASUSTeK ROG KERIS] on usb-0000:00:14.0-9/input1
[    3.818171] input: ASUSTeK ROG KERIS Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:0B05:195C.0003/input/input4
[    3.874290] input: ASUSTeK ROG KERIS System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:0B05:195C.0003/input/input5
[    3.874552] input: ASUSTeK ROG KERIS as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:0B05:195C.0003/input/input6
[    3.874820] input: ASUSTeK ROG KERIS Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:0B05:195C.0003/input/input7
[    3.875352] hid-generic 0003:0B05:195C.0003: input,hiddev97,hidraw2: USB HID v1.11 Keyboard [ASUSTeK ROG KERIS] on usb-0000:00:14.0-9/input2
[    3.903937] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    4.046036] usb 1-10: New USB device found, idVendor=046a, idProduct=00ce, bcdDevice= 1.04
[    4.046050] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.046056] usb 1-10: Product: Mechanical Keyboard
[    4.046060] usb 1-10: Manufacturer: CHERRY
[    4.047972] input: CHERRY Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046A:00CE.0004/input/input8
[    4.103998] hid-generic 0003:046A:00CE.0004: input,hidraw3: USB HID v1.11 Keyboard [CHERRY Mechanical Keyboard] on usb-0000:00:14.0-10/input0
[    4.105132] input: CHERRY Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046A:00CE.0005/input/input9
[    4.160721] input: CHERRY Mechanical Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046A:00CE.0005/input/input10
[    4.160814] input: CHERRY Mechanical Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046A:00CE.0005/input/input11
[    4.161060] hid-generic 0003:046A:00CE.0005: input,hiddev98,hidraw4: USB HID v1.11 Keyboard [CHERRY Mechanical Keyboard] on usb-0000:00:14.0-10/input1
[    4.283957] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[    4.374462] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[    4.376617] XFS (nvme0n1p4): Mounting V5 Filesystem f6f37ea7-8492-48c7-a435-32d511440f4d
[    4.385202] XFS (nvme0n1p4): Ending clean mount
[    4.428748] usb 1-11: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[    4.428751] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.428752] usb 1-11: Product: USB2.0 Hub
[    4.429644] hub 1-11:1.0: USB hub found
[    4.429982] hub 1-11:1.0: 4 ports detected
[    4.439852] systemd[1]: systemd 256.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    4.439855] systemd[1]: Detected architecture x86-64.
[    4.442668] systemd[1]: Hostname set to <DESKTOP-MS-7C82>.
[    4.554009] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[    4.695186] usb 1-12: New USB device found, idVendor=1462, idProduct=7c82, bcdDevice= 0.01
[    4.695200] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.695206] usb 1-12: Product: MYSTIC LIGHT
[    4.695211] usb 1-12: Manufacturer: MSI
[    4.695214] usb 1-12: SerialNumber: A02020043004
[    4.697586] input: MSI MYSTIC LIGHT  as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:1462:7C82.0006/input/input12
[    4.697774] hid-generic 0003:1462:7C82.0006: input,hiddev99,hidraw5: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-12/input0
[    4.703581] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    4.767285] usb 1-11.1: new full-speed USB device number 6 using xhci_hcd
[    4.849198] systemd[1]: Queued start job for default target Graphical Interface.
[    4.862278] usb 1-11.1: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[    4.862280] usb 1-11.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.894929] systemd[1]: Created slice Slice /system/dirmngr.
[    4.895271] systemd[1]: Created slice Slice /system/getty.
[    4.895565] systemd[1]: Created slice Slice /system/gpg-agent.
[    4.895862] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    4.896160] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    4.896456] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    4.896755] systemd[1]: Created slice Slice /system/keyboxd.
[    4.897051] systemd[1]: Created slice Slice /system/modprobe.
[    4.897369] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.897585] systemd[1]: Created slice User and Session Slice.
[    4.897671] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.897754] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.897913] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.897983] systemd[1]: Expecting device /dev/disk/by-uuid/084bcc79-a7fd-44bb-9832-1025d895e824...
[    4.898034] systemd[1]: Expecting device /dev/disk/by-uuid/3aec1f3c-85c7-43cc-bceb-78a45a35834f...
[    4.898082] systemd[1]: Expecting device /dev/disk/by-uuid/74fa5ae8-c750-404a-b73c-31fe70832cb2...
[    4.898133] systemd[1]: Expecting device /dev/disk/by-uuid/8d5fa812-629c-4edd-874b-e5bc2521de52...
[    4.898181] systemd[1]: Expecting device /dev/disk/by-uuid/A55D-FC43...
[    4.898221] systemd[1]: Expecting device /dev/disk/by-uuid/fefed0c9-53b0-4838-b2fe-00b9fc3f2153...
[    4.898273] systemd[1]: Reached target Local Encrypted Volumes.
[    4.898320] systemd[1]: Reached target Login Prompts.
[    4.898362] systemd[1]: Reached target Local Integrity Protected Volumes.
[    4.898416] systemd[1]: Reached target Path Units.
[    4.898457] systemd[1]: Reached target Remote File Systems.
[    4.898499] systemd[1]: Reached target Slice Units.
[    4.898552] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.898658] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.899806] systemd[1]: Listening on Process Core Dump Socket.
[    4.900521] systemd[1]: Listening on Credential Encryption/Decryption.
[    4.900670] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.900786] systemd[1]: Listening on Journal Sockets.
[    4.900876] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.900889] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.900955] systemd[1]: Listening on udev Control Socket.
[    4.901051] systemd[1]: Listening on udev Kernel Socket.
[    4.901150] systemd[1]: Listening on User Database Manager Socket.
[    4.902038] systemd[1]: Mounting Huge Pages File System...
[    4.902684] systemd[1]: Mounting POSIX Message Queue File System...
[    4.903309] systemd[1]: Mounting Kernel Debug File System...
[    4.903903] systemd[1]: Mounting Kernel Trace File System...
[    4.904679] systemd[1]: Starting Create List of Static Device Nodes...
[    4.905390] systemd[1]: Starting Load Kernel Module configfs...
[    4.906073] systemd[1]: Starting Load Kernel Module dm_mod...
[    4.906763] systemd[1]: Starting Load Kernel Module drm...
[    4.908496] systemd[1]: Starting Load Kernel Module fuse...
[    4.909743] systemd[1]: Starting Load Kernel Module loop...
[    4.910310] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    4.910374] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    4.911767] systemd[1]: Starting Journal Service...
[    4.913175] systemd[1]: Starting Load Kernel Modules...
[    4.913707] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.914407] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.914985] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.915618] systemd[1]: Starting Load udev Rules from Credentials...
[    4.916786] systemd[1]: Starting Coldplug All udev Devices...
[    4.918667] loop: module loaded
[    4.920953] device-mapper: uevent: version 1.0.3
[    4.921034] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    4.921094] systemd[1]: Mounted Huge Pages File System.
[    4.921975] systemd[1]: Mounted POSIX Message Queue File System.
[    4.922426] systemd[1]: Mounted Kernel Debug File System.
[    4.923056] systemd[1]: Mounted Kernel Trace File System.
[    4.923586] systemd[1]: Finished Create List of Static Device Nodes.
[    4.924136] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.924243] systemd[1]: Finished Load Kernel Module configfs.
[    4.924764] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    4.924854] systemd[1]: Finished Load Kernel Module dm_mod.
[    4.925337] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.925430] systemd[1]: Finished Load Kernel Module drm.
[    4.925616] systemd-journald[385]: Collecting audit messages is disabled.
[    4.925895] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.925981] systemd[1]: Finished Load Kernel Module fuse.
[    4.926445] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    4.926532] systemd[1]: Finished Load Kernel Module loop.
[    4.926996] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.927500] systemd[1]: Finished Load udev Rules from Credentials.
[    4.927583] Asymmetric key parser 'pkcs8' registered
[    4.928053] systemd[1]: Finished Load Kernel Modules.
[    4.928942] systemd[1]: Mounting FUSE Control File System...
[    4.929615] systemd[1]: Mounting Kernel Configuration File System...
[    4.930481] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    4.930521] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    4.931003] systemd[1]: Starting Apply Kernel Variables...
[    4.931762] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    4.932746] systemd[1]: Mounted FUSE Control File System.
[    4.933141] systemd[1]: Mounted Kernel Configuration File System.
[    4.936312] systemd[1]: Finished Apply Kernel Variables.
[    4.943421] systemd[1]: Starting User Database Manager...
[    4.945121] systemd[1]: Started Journal Service.
[    5.064953] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than PCI Bus 0000:00 [mem 0xfc800000-0xfdffffff window]
[    5.064957] caller get_primary_reg_base+0x4d/0xb0 [intel_pmc_core] mapping multiple BARs
[    5.064968] intel_pmc_core INT33A1:00:  initialized
[    5.069478] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.072475] mousedev: PS/2 mouse device common for all mice
[    5.081464] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    5.089595] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    5.091764] i2c i2c-5: Successfully instantiated SPD at 0x51
[    5.092252] i2c i2c-5: Successfully instantiated SPD at 0x53
[    5.109148] Bluetooth: Core ver 2.22
[    5.109209] NET: Registered PF_BLUETOOTH protocol family
[    5.109211] Bluetooth: HCI device and connection manager initialized
[    5.109214] Bluetooth: HCI socket layer initialized
[    5.109216] Bluetooth: L2CAP socket layer initialized
[    5.109219] Bluetooth: SCO socket layer initialized
[    5.109253] r8169 0000:02:00.0: enabling device (0000 -> 0003)
[    5.109420] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.122215] r8169 0000:02:00.0 eth0: RTL8125B, 2c:f0:5d:ce:3c:82, XID 641, IRQ 145
[    5.122219] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    5.157941] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.158045] iTCO_vendor_support: vendor-support=0
[    5.159155] ee1004 5-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.159179] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    5.159702] ee1004 5-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.160234] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.160402] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.160801] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.160805] cfg80211: failed to load regulatory.db
[    5.204657] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    5.204750] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.205087] snd_hda_intel 0000:00:1f.3: enabling device (0400 -> 0402)
[    5.205424] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    5.205617] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.205622] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.211832] Intel(R) Wireless WiFi driver for Linux
[    5.211854] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[    5.212449] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    5.212451] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.212452] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.212453] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.214795] iwlwifi 0000:03:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
[    5.214801] iwlwifi 0000:03:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100
[    5.215261] cryptd: max_cpu_qlen set to 1000
[    5.219614] usbcore: registered new interface driver btusb
[    5.220236] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[    5.221232] Bluetooth: hci0: Device revision is 1
[    5.221234] Bluetooth: hci0: Secure boot is enabled
[    5.221234] Bluetooth: hci0: OTP lock is enabled
[    5.221235] Bluetooth: hci0: API lock is enabled
[    5.221235] Bluetooth: hci0: Debug lock is disabled
[    5.221236] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    5.221812] AVX2 version of gcm_enc/dec engaged.
[    5.221843] AES CTR mode by8 optimization enabled
[    5.223078] iwlwifi 0000:03:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    5.223304] iwlwifi 0000:03:00.0: loaded firmware version 77.c360c4b1.0 cc-a0-77.ucode op_mode iwlmvm
[    5.226051] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[    5.226132] Bluetooth: hci0: Boot Address: 0x24800
[    5.226133] Bluetooth: hci0: Firmware Version: 132-3.24
[    5.228001] pps_core: LinuxPPS API ver. 1 registered
[    5.228002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    5.229078] snd_hda_codec_realtek hdaudioC0D0: ALCS1200A: SKU not ready 0x00000000
[    5.229538] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    5.229541] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.229542] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.229543] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.229543] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    5.229544] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.229545] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.229546] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.229547] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    5.231975] PTP clock support registered
[    5.232533] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    5.232574] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    5.232607] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    5.232641] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    5.242223] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.242261] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.242286] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.242307] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    5.242330] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    5.242353] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    5.242376] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    5.328535] iwlwifi 0000:03:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[    5.328579] thermal thermal_zone1: failed to read out thermal zone (-61)
[    5.379959] intel_tcc_cooling: Programmable TCC Offset detected
[    5.451058] iwlwifi 0000:03:00.0: Detected RF HR B3, rfid=0x10a100
[    5.486963] Adding 25165820k swap on /dev/sdb1.  Priority:-2 extents:1 across:25165820k
[    5.514214] intel_rapl_common: Found RAPL domain package
[    5.514216] intel_rapl_common: Found RAPL domain core
[    5.514217] intel_rapl_common: Found RAPL domain dram
[    5.516511] iwlwifi 0000:03:00.0: base HW address: e0:d4:e8:e0:05:ec
[    5.603943] thermal thermal_zone1: failed to read out thermal zone (-61)
[    5.870595] thermal thermal_zone1: failed to read out thermal zone (-61)
[    5.967996] XFS: attr2 mount option is deprecated.
[    5.968034] XFS: attr2 mount option is deprecated.
[    5.968587] XFS (sda2): Mounting V5 Filesystem 084bcc79-a7fd-44bb-9832-1025d895e824
[    5.968623] XFS (sda3): Mounting V5 Filesystem 8d5fa812-629c-4edd-874b-e5bc2521de52
[    5.970365] XFS: attr2 mount option is deprecated.
[    5.971273] XFS: attr2 mount option is deprecated.
[    5.972025] XFS (sdb3): Mounting V5 Filesystem 74fa5ae8-c750-404a-b73c-31fe70832cb2
[    5.993393] XFS (sdb2): Mounting V5 Filesystem fefed0c9-53b0-4838-b2fe-00b9fc3f2153
[    6.137263] thermal thermal_zone1: failed to read out thermal zone (-61)
[    6.327106] XFS (sda3): Ending clean mount
[    6.354019] XFS (sdb3): Ending clean mount
[    6.377721] XFS (sda2): Ending clean mount
[    6.403931] thermal thermal_zone1: failed to read out thermal zone (-61)
[    6.436279] systemd-journald[385]: Received client request to flush runtime journal.
[    6.455227] XFS (sdb2): Ending clean mount
[    6.670627] thermal thermal_zone1: failed to read out thermal zone (-61)
[    6.767000] Bluetooth: hci0: Waiting for firmware download to complete
[    6.767229] Bluetooth: hci0: Firmware loaded in 1505053 usecs
[    6.767255] Bluetooth: hci0: Waiting for device to boot
[    6.782337] Bluetooth: hci0: Device booted in 14733 usecs
[    6.782359] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[    6.783165] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[    6.785393] Bluetooth: hci0: Applying Intel DDC parameters completed
[    6.786391] Bluetooth: hci0: Firmware revision 0.3 build 132 week 3 2024
[    6.788394] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[    6.937328] thermal thermal_zone1: failed to read out thermal zone (-61)
[    7.204016] thermal thermal_zone1: failed to read out thermal zone (-61)
[    7.470570] thermal thermal_zone1: failed to read out thermal zone (-61)
[    7.740657] thermal thermal_zone1: failed to read out thermal zone (-61)
[    7.914377] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.914379] Bluetooth: BNEP filters: protocol multicast
[    7.914382] Bluetooth: BNEP socket layer initialized
[    7.915002] Bluetooth: MGMT ver 1.22
[    7.918457] NET: Registered PF_ALG protocol family
[    8.007292] thermal thermal_zone1: failed to read out thermal zone (-61)
[    8.010645] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[    8.184102] r8169 0000:02:00.0 enp2s0: Link is Down
[    8.270647] thermal thermal_zone1: failed to read out thermal zone (-61)
[    8.540699] thermal thermal_zone1: failed to read out thermal zone (-61)
[    8.804026] thermal thermal_zone1: failed to read out thermal zone (-61)
[    9.070607] thermal thermal_zone1: failed to read out thermal zone (-61)
[    9.337341] thermal thermal_zone1: failed to read out thermal zone (-61)
[    9.603929] thermal thermal_zone1: failed to read out thermal zone (-61)
[    9.870610] thermal thermal_zone1: failed to read out thermal zone (-61)
[   10.137274] thermal thermal_zone1: failed to read out thermal zone (-61)
[   10.403942] thermal thermal_zone1: failed to read out thermal zone (-61)
[   10.670603] thermal thermal_zone1: failed to read out thermal zone (-61)
[   10.937287] thermal thermal_zone1: failed to read out thermal zone (-61)
[   11.203928] thermal thermal_zone1: failed to read out thermal zone (-61)
[   11.470651] thermal thermal_zone1: failed to read out thermal zone (-61)
[   11.517368] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[   11.535034] 8021q: 802.1Q VLAN Support v1.8
[   11.740568] thermal thermal_zone1: failed to read out thermal zone (-61)
[   11.891959] rfkill: input handler disabled
[   12.003947] thermal thermal_zone1: failed to read out thermal zone (-61)
[   12.270663] thermal thermal_zone1: failed to read out thermal zone (-61)
[   12.489461] Bluetooth: RFCOMM TTY layer initialized
[   12.489466] Bluetooth: RFCOMM socket layer initialized
[   12.489467] Bluetooth: RFCOMM ver 1.11
[   12.537261] thermal thermal_zone1: failed to read out thermal zone (-61)
[   12.803996] thermal thermal_zone1: failed to read out thermal zone (-61)
[   13.070670] thermal thermal_zone1: failed to read out thermal zone (-61)
[   13.337333] thermal thermal_zone1: failed to read out thermal zone (-61)
[   13.607307] thermal thermal_zone1: failed to read out thermal zone (-61)
[   13.870609] thermal thermal_zone1: failed to read out thermal zone (-61)
[   14.137298] thermal thermal_zone1: failed to read out thermal zone (-61)
[   14.404002] thermal thermal_zone1: failed to read out thermal zone (-61)
[   14.670647] thermal thermal_zone1: failed to read out thermal zone (-61)
[   14.937333] thermal thermal_zone1: failed to read out thermal zone (-61)
[   15.203969] thermal thermal_zone1: failed to read out thermal zone (-61)
[   15.470675] thermal thermal_zone1: failed to read out thermal zone (-61)
[   15.534020] platform INT3515:01: deferred probe pending: Serial bus multi instantiate pseudo device driver: Error creating i2c-client, idx 0
[   15.737235] thermal thermal_zone1: failed to read out thermal zone (-61)
[   16.003976] thermal thermal_zone1: failed to read out thermal zone (-61)
[   16.270648] thermal thermal_zone1: failed to read out thermal zone (-61)
[   16.537356] thermal thermal_zone1: failed to read out thermal zone (-61)
[   16.804026] thermal thermal_zone1: failed to read out thermal zone (-61)
[   17.070668] thermal thermal_zone1: failed to read out thermal zone (-61)
[   17.337303] thermal thermal_zone1: failed to read out thermal zone (-61)
[   17.604011] thermal thermal_zone1: failed to read out thermal zone (-61)
[   17.870683] thermal thermal_zone1: failed to read out thermal zone (-61)
[   18.137350] thermal thermal_zone1: failed to read out thermal zone (-61)
[   18.404003] thermal thermal_zone1: failed to read out thermal zone (-61)
[   18.670654] thermal thermal_zone1: failed to read out thermal zone (-61)
[   18.937317] thermal thermal_zone1: failed to read out thermal zone (-61)
[   19.204006] thermal thermal_zone1: failed to read out thermal zone (-61)
[   19.470667] thermal thermal_zone1: failed to read out thermal zone (-61)
[   19.737330] thermal thermal_zone1: failed to read out thermal zone (-61)
[   20.003979] thermal thermal_zone1: failed to read out thermal zone (-61)
[   20.270658] thermal thermal_zone1: failed to read out thermal zone (-61)
[   20.537324] thermal thermal_zone1: failed to read out thermal zone (-61)
[   20.803986] thermal thermal_zone1: failed to read out thermal zone (-61)
[   21.070647] thermal thermal_zone1: failed to read out thermal zone (-61)
[   21.337305] thermal thermal_zone1: failed to read out thermal zone (-61)
[   21.603993] thermal thermal_zone1: failed to read out thermal zone (-61)
[   21.870666] thermal thermal_zone1: failed to read out thermal zone (-61)
[   22.137306] thermal thermal_zone1: failed to read out thermal zone (-61)
[   22.404006] thermal thermal_zone1: failed to read out thermal zone (-61)
[   22.670686] thermal thermal_zone1: failed to read out thermal zone (-61)
[   22.937344] thermal thermal_zone1: failed to read out thermal zone (-61)
[   23.204020] thermal thermal_zone1: failed to read out thermal zone (-61)
[   23.473955] thermal thermal_zone1: failed to read out thermal zone (-61)
[   23.737326] thermal thermal_zone1: failed to read out thermal zone (-61)
[   24.003977] thermal thermal_zone1: failed to read out thermal zone (-61)
[   24.270651] thermal thermal_zone1: failed to read out thermal zone (-61)
[   24.537317] thermal thermal_zone1: failed to read out thermal zone (-61)
[   24.803991] thermal thermal_zone1: failed to read out thermal zone (-61)
[   25.070658] thermal thermal_zone1: failed to read out thermal zone (-61)
[   25.337342] thermal thermal_zone1: failed to read out thermal zone (-61)
[   25.604004] thermal thermal_zone1: failed to read out thermal zone (-61)
[   25.870667] thermal thermal_zone1: failed to read out thermal zone (-61)
[   26.137327] thermal thermal_zone1: failed to read out thermal zone (-61)
[   26.404022] thermal thermal_zone1: failed to read out thermal zone (-61)
[   26.670603] thermal thermal_zone1: failed to read out thermal zone (-61)
[   26.937287] thermal thermal_zone1: failed to read out thermal zone (-61)
[   27.203939] thermal thermal_zone1: failed to read out thermal zone (-61)
[   27.470605] thermal thermal_zone1: failed to read out thermal zone (-61)
[   27.549138] rfkill: input handler enabled
[   27.737265] thermal thermal_zone1: failed to read out thermal zone (-61)
[   28.003956] thermal thermal_zone1: failed to read out thermal zone (-61)
[   28.270620] thermal thermal_zone1: failed to read out thermal zone (-61)
[   28.537289] thermal thermal_zone1: failed to read out thermal zone (-61)
[   28.803997] thermal thermal_zone1: failed to read out thermal zone (-61)
[   29.070645] thermal thermal_zone1: failed to read out thermal zone (-61)
[   29.337310] thermal thermal_zone1: failed to read out thermal zone (-61)
[   29.604004] thermal thermal_zone1: failed to read out thermal zone (-61)
[   29.870639] thermal thermal_zone1: failed to read out thermal zone (-61)
[   30.137305] thermal thermal_zone1: failed to read out thermal zone (-61)
[   30.403970] thermal thermal_zone1: failed to read out thermal zone (-61)
[   30.670649] thermal thermal_zone1: failed to read out thermal zone (-61)
[   30.937323] thermal thermal_zone1: failed to read out thermal zone (-61)
[   31.203993] thermal thermal_zone1: failed to read out thermal zone (-61)
[   31.470620] thermal thermal_zone1: failed to read out thermal zone (-61)
[   31.737305] thermal thermal_zone1: failed to read out thermal zone (-61)
[   32.003997] thermal thermal_zone1: failed to read out thermal zone (-61)
[   32.273984] thermal thermal_zone1: failed to read out thermal zone (-61)
[   32.537313] thermal thermal_zone1: failed to read out thermal zone (-61)
[   32.804013] thermal thermal_zone1: failed to read out thermal zone (-61)
[   33.070657] thermal thermal_zone1: failed to read out thermal zone (-61)
[   33.337301] thermal thermal_zone1: failed to read out thermal zone (-61)
[   33.603977] thermal thermal_zone1: failed to read out thermal zone (-61)
[   33.870649] thermal thermal_zone1: failed to read out thermal zone (-61)
[   34.137323] thermal thermal_zone1: failed to read out thermal zone (-61)
[   34.403967] thermal thermal_zone1: failed to read out thermal zone (-61)
[   34.670699] thermal thermal_zone1: failed to read out thermal zone (-61)
[   34.937299] thermal thermal_zone1: failed to read out thermal zone (-61)
[   35.203992] thermal thermal_zone1: failed to read out thermal zone (-61)
[   35.470632] thermal thermal_zone1: failed to read out thermal zone (-61)
[   35.737308] thermal thermal_zone1: failed to read out thermal zone (-61)
[   36.004021] thermal thermal_zone1: failed to read out thermal zone (-61)
[   36.270694] thermal thermal_zone1: failed to read out thermal zone (-61)
[   36.537290] thermal thermal_zone1: failed to read out thermal zone (-61)
[   36.807330] thermal thermal_zone1: failed to read out thermal zone (-61)
[   37.070647] thermal thermal_zone1: failed to read out thermal zone (-61)
[   37.337318] thermal thermal_zone1: failed to read out thermal zone (-61)
[   37.603993] thermal thermal_zone1: failed to read out thermal zone (-61)
[   37.870634] thermal thermal_zone1: failed to read out thermal zone (-61)
[   38.137340] thermal thermal_zone1: failed to read out thermal zone (-61)
[   38.403775] thermal thermal_zone1: failed to read out thermal zone (-61)
[   38.670188] thermal thermal_zone1: failed to read out thermal zone (-61)
[   38.936657] thermal thermal_zone1: failed to read out thermal zone (-61)
[   39.203099] thermal thermal_zone1: failed to read out thermal zone (-61)
[   39.469567] thermal thermal_zone1: failed to read out thermal zone (-61)
[   39.736000] thermal thermal_zone1: failed to read out thermal zone (-61)
[   40.002478] thermal thermal_zone1: failed to read out thermal zone (-61)
[   40.268951] thermal thermal_zone1: failed to read out thermal zone (-61)
[   40.535390] thermal thermal_zone1: failed to read out thermal zone (-61)
[   40.801883] thermal thermal_zone1: failed to read out thermal zone (-61)
[   41.068327] thermal thermal_zone1: failed to read out thermal zone (-61)
[   41.334819] thermal thermal_zone1: failed to read out thermal zone (-61)
[   41.601303] thermal thermal_zone1: failed to read out thermal zone (-61)
[   41.867790] thermal thermal_zone1: failed to read out thermal zone (-61)
[   42.134296] thermal thermal_zone1: failed to read out thermal zone (-61)
[   42.400758] thermal thermal_zone1: failed to read out thermal zone (-61)
[   42.667254] thermal thermal_zone1: failed to read out thermal zone (-61)
[   42.933754] thermal thermal_zone1: failed to read out thermal zone (-61)
[   43.200243] thermal thermal_zone1: failed to read out thermal zone (-61)
[   43.466749] thermal thermal_zone1: failed to read out thermal zone (-61)
[   43.733255] thermal thermal_zone1: failed to read out thermal zone (-61)
[   43.999760] thermal thermal_zone1: failed to read out thermal zone (-61)
[   44.266295] thermal thermal_zone1: failed to read out thermal zone (-61)
[   44.532779] thermal thermal_zone1: failed to read out thermal zone (-61)
[   44.799304] thermal thermal_zone1: failed to read out thermal zone (-61)
[   45.065819] thermal thermal_zone1: failed to read out thermal zone (-61)
[   45.332372] thermal thermal_zone1: failed to read out thermal zone (-61)
[   45.598891] thermal thermal_zone1: failed to read out thermal zone (-61)
[   45.865392] thermal thermal_zone1: failed to read out thermal zone (-61)
[   46.131900] thermal thermal_zone1: failed to read out thermal zone (-61)
[   46.398448] thermal thermal_zone1: failed to read out thermal zone (-61)
[   46.664998] thermal thermal_zone1: failed to read out thermal zone (-61)
[   46.931502] thermal thermal_zone1: failed to read out thermal zone (-61)
[   47.198062] thermal thermal_zone1: failed to read out thermal zone (-61)
[   47.464591] thermal thermal_zone1: failed to read out thermal zone (-61)
[   47.731153] thermal thermal_zone1: failed to read out thermal zone (-61)
[   47.997661] thermal thermal_zone1: failed to read out thermal zone (-61)
[   48.264211] thermal thermal_zone1: failed to read out thermal zone (-61)
[   48.530760] thermal thermal_zone1: failed to read out thermal zone (-61)
[   48.797316] thermal thermal_zone1: failed to read out thermal zone (-61)
[   49.063857] thermal thermal_zone1: failed to read out thermal zone (-61)
[   49.330426] thermal thermal_zone1: failed to read out thermal zone (-61)
[   49.596982] thermal thermal_zone1: failed to read out thermal zone (-61)
[   49.863539] thermal thermal_zone1: failed to read out thermal zone (-61)
[   50.130094] thermal thermal_zone1: failed to read out thermal zone (-61)
[   50.396659] thermal thermal_zone1: failed to read out thermal zone (-61)
[   50.663231] thermal thermal_zone1: failed to read out thermal zone (-61)
[   50.929809] thermal thermal_zone1: failed to read out thermal zone (-61)
[   51.196362] thermal thermal_zone1: failed to read out thermal zone (-61)
[   51.462920] thermal thermal_zone1: failed to read out thermal zone (-61)
[   51.729517] thermal thermal_zone1: failed to read out thermal zone (-61)
[   51.996095] thermal thermal_zone1: failed to read out thermal zone (-61)
[   52.262622] thermal thermal_zone1: failed to read out thermal zone (-61)
[   52.529207] thermal thermal_zone1: failed to read out thermal zone (-61)
[   52.795788] thermal thermal_zone1: failed to read out thermal zone (-61)
[   53.062362] thermal thermal_zone1: failed to read out thermal zone (-61)
[   53.328945] thermal thermal_zone1: failed to read out thermal zone (-61)
[   53.595532] thermal thermal_zone1: failed to read out thermal zone (-61)
[   53.862101] thermal thermal_zone1: failed to read out thermal zone (-61)
[   54.128699] thermal thermal_zone1: failed to read out thermal zone (-61)
[   54.395285] thermal thermal_zone1: failed to read out thermal zone (-61)
[   54.661849] thermal thermal_zone1: failed to read out thermal zone (-61)
[   54.928471] thermal thermal_zone1: failed to read out thermal zone (-61)
[   55.195067] thermal thermal_zone1: failed to read out thermal zone (-61)
[   55.464945] thermal thermal_zone1: failed to read out thermal zone (-61)
[   55.728228] thermal thermal_zone1: failed to read out thermal zone (-61)
[   55.994840] thermal thermal_zone1: failed to read out thermal zone (-61)
[   56.261421] thermal thermal_zone1: failed to read out thermal zone (-61)
[   56.528040] thermal thermal_zone1: failed to read out thermal zone (-61)
[   56.794632] thermal thermal_zone1: failed to read out thermal zone (-61)
[   57.061221] thermal thermal_zone1: failed to read out thermal zone (-61)
[   57.327811] thermal thermal_zone1: failed to read out thermal zone (-61)
[   57.594404] thermal thermal_zone1: failed to read out thermal zone (-61)
[   57.861005] thermal thermal_zone1: failed to read out thermal zone (-61)
[   58.127602] thermal thermal_zone1: failed to read out thermal zone (-61)
[   58.394202] thermal thermal_zone1: failed to read out thermal zone (-61)

最近编辑记录 DongStar (2024-07-30 07:39:17)

离线

#2 2024-07-23 21:39:59

DongStar
会员
注册时间: 2024-04-04
帖子: 6

Re: 【已解决】dmesg中显示一直重复的错误thermal thermal_zone1: failed to

这个问题在上个内核版本中是没有的。

离线

#3 2024-07-24 03:12:41

BRS5672023
会员
注册时间: 2020-07-07
帖子: 125

Re: 【已解决】dmesg中显示一直重复的错误thermal thermal_zone1: failed to

我记得这个是 thermald 的错误提示,但我没用过。。

看来不是,我的 dmesg 里面也有。。这个 patch 应该有用 Bug 201761 - "failed to read out thermal zone" for wifi thermal zone

更新到 6.10.1 内核之后没有这个 warn 了,应该是修复了。。

最近编辑记录 BRS5672023 (2024-07-25 08:31:39)

离线

#4 2024-07-25 19:48:00

DongStar
会员
注册时间: 2024-04-04
帖子: 6

Re: 【已解决】dmesg中显示一直重复的错误thermal thermal_zone1: failed to

BRS5672023 说:

我记得这个是 thermald 的错误提示,但我没用过。。

看来不是,我的 dmesg 里面也有。。这个 patch 应该有用 Bug 201761 - "failed to read out thermal zone" for wifi thermal zone

更新到 6.10.1 内核之后没有这个 warn 了,应该是修复了。。

感谢,那在正式更新6.10.1前我先用LTS内核吧。

离线

#5 2024-07-26 08:47:26

giteeajake
会员
所在地: Hebei
注册时间: 2024-06-11
帖子: 31
个人网站

Re: 【已解决】dmesg中显示一直重复的错误thermal thermal_zone1: failed to

hi
i think you need to disabe the thermal zone

离线

页脚