监测硬件温度，大家现在都用的什么软件？

管毅 · 2014-06-01 12:00:10

前几天一不注意把电脑烧晕了，幸好没大事……

wiki上了找了半天没找着，谷歌现在完全没法用，百度不提也罢。
还有安装过程若能详细说一下就太感谢了。

mapleray · 2014-06-01 13:11:27

lm-sensors？

intetnet · 2014-06-01 13:13:15

加一个hddtemp检查硬盘

依云 · 2014-06-01 14:18:47

现在的电脑温度过高会自动保护了吧。lm-sensors+1

管毅 · 2014-06-01 17:45:03

这是个悲伤的故事：
原来装lm-sensors需要yaourt，你们竟然谁也不说，太坏了……
还有在vbox上检测不到传感器的吧？也不知是我装的不对还是怎么地，反正是没找着。
本来还打算把主系统换成arch的，现在看来还是先练练吧，咱还是太菜了。

mapleray · 2014-06-01 19:45:13

管毅说：

这是个悲伤的故事：
原来装lm-sensors需要yaourt，你们竟然谁也不说，太坏了……
还有在vbox上检测不到传感器的吧？也不知是我装的不对还是怎么地，反正是没找着。
本来还打算把主系统换成arch的，现在看来还是先练练吧，咱还是太菜了。

汗= =pacman ,yaourt这两个是必备额= =
yaourt 直接加上archlinuxcn就有了，如果是教育网的话，ustc也有archlinuxcn的镜像，速度很快。
vbox按理应该也能检测到把

管毅 · 2014-06-01 21:03:21

mapleray 说：

管毅说：
这是个悲伤的故事：
原来装lm-sensors需要yaourt，你们竟然谁也不说，太坏了……
还有在vbox上检测不到传感器的吧？也不知是我装的不对还是怎么地，反正是没找着。
本来还打算把主系统换成arch的，现在看来还是先练练吧，咱还是太菜了。
汗= =pacman ,yaourt这两个是必备额= =
yaourt 直接加上archlinuxcn就有了，如果是教育网的话，ustc也有archlinuxcn的镜像，速度很快。
vbox按理应该也能检测到把

以为pacman足够用了，就没装yaourt。
用sensort-detect测了一下，结果一个传感器没找着，如下：
# sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
# System: innotek GmbH VirtualBox [1.2]
# Board: Oracle Corporation VirtualBox

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): yes
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-piix4' for device 0000:00:07.0: Intel 82371AB PIIX4 ACPI

Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.

cuihao · 2014-06-01 22:46:11

管毅说：

这是个悲伤的故事：
原来装lm-sensors需要yaourt，你们竟然谁也不说，太坏了……
还有在vbox上检测不到传感器的吧？也不知是我装的不对还是怎么地，反正是没找着。
本来还打算把主系统换成arch的，现在看来还是先练练吧，咱还是太菜了。

明明在extra里，为何要yaourt？

extra/lm_sensors 3.3.5-1 [installed]
    Collection of user space tools for general SMBus access and hardware 
    monitoring

管毅 · 2014-06-02 09:54:38

cuihao 说：

管毅说：
这是个悲伤的故事：
原来装lm-sensors需要yaourt，你们竟然谁也不说，太坏了……
还有在vbox上检测不到传感器的吧？也不知是我装的不对还是怎么地，反正是没找着。
本来还打算把主系统换成arch的，现在看来还是先练练吧，咱还是太菜了。
明明在extra里，为何要yaourt？
extra/lm_sensors 3.3.5-1 [installed]
    Collection of user space tools for general SMBus access and hardware 
    monitoring

果然可以，这个，lm_sensors在pacman里应该用下橫线？用lm-sensors会找不到目标啊。——果然说他们坏人，木有冤枉他们呀。
又用yaourt试了一下，_或-都可以，-_-!

自由建客 · 2014-06-11 23:53:52

>0< ~$ sudo hddtemp /dev/sda && sensors
/dev/sda: ST9120822AS: 42°C
acpitz-virtual-0
Adapter: Virtual device
temp1:        +48.0°C  (crit = +120.0°C)
temp2:        +51.0°C  (crit = +120.0°C)

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:   +43.0°C  
Core0 Temp:   +46.0°C  
Core1 Temp:   +48.0°C  
Core1 Temp:   +45.0°C  


>0< ~$

次奥，大电风扇对着吹还这么热！

Arch Linux

#1 2014-06-01 12:00:10

监测硬件温度，大家现在都用的什么软件？

#2 2014-06-01 13:11:27

Re: 监测硬件温度，大家现在都用的什么软件？

#3 2014-06-01 13:13:15

Re: 监测硬件温度，大家现在都用的什么软件？

#4 2014-06-01 14:18:47

Re: 监测硬件温度，大家现在都用的什么软件？

#5 2014-06-01 17:45:03

Re: 监测硬件温度，大家现在都用的什么软件？

#6 2014-06-01 19:45:13

Re: 监测硬件温度，大家现在都用的什么软件？

#7 2014-06-01 21:03:21

Re: 监测硬件温度，大家现在都用的什么软件？

#8 2014-06-01 22:46:11

Re: 监测硬件温度，大家现在都用的什么软件？

#9 2014-06-02 09:54:38

Re: 监测硬件温度，大家现在都用的什么软件？

#10 2014-06-11 23:53:52

Re: 监测硬件温度，大家现在都用的什么软件？

页脚