sna和uxa问题

lijing48301243 · 2014-09-03 10:16:03

升级系统后:
mplayer播放出现i问题:
intel_do_flush_locked failed: Invalid argument

将显卡xorg加速模式从sna改成uxa
section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "uxa"
EndSection
MPLayeru恢复正常了

可是在awesomehgi中一切换到fcitx中文,整个X就退出了, 咋整啊

依云 · 2014-09-03 19:13:28

有错误日志么？

lijing48301243 · 2014-09-04 08:55:01

大神来了
[ 84525.438] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 84544.480] (EE)
[ 84544.480] (EE) Backtrace:
[ 84544.480] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593966]
[ 84544.480] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197b69) [0x597b69]
[ 84544.480] (EE) 2: /usr/lib/libc.so.6 (0x7f2fe3a16000+0x33df0) [0x7f2fe3a49df0]
[ 84544.480] (EE) 3: /usr/lib/libpixman-1.so.0 (0x7f2fe4912000+0x93b30) [0x7f2fe49a5b30]
[ 84544.480] (EE) 4: /usr/lib/libpixman-1.so.0 (0x7f2fe4912000+0x59b43) [0x7f2fe496bb43]
[ 84544.480] (EE) 5: /usr/lib/libpixman-1.so.0 (pixman_blt+0x3e) [0x7f2fe491dabe]
[ 84544.480] (EE) 6: /usr/lib/xorg/modules/libfb.so (fbCopyNtoN+0x32a) [0x7f2fde82f4da]
[ 84544.480] (EE) 7: /usr/bin/Xorg.bin (miCopyRegion+0x1a7) [0x572f47]
[ 84544.480] (EE) 8: /usr/bin/Xorg.bin (miDoCopy+0x45e) [0x5734ee]
[ 84544.480] (EE) 9: /usr/lib/xorg/modules/libfb.so (fbCopyArea+0x2d) [0x7f2fde82fcbd]
[ 84544.480] (EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f2fdec62000+0x14afcc) [0x7f2fdedacfcc]
[ 84544.480] (EE) 11: /usr/bin/Xorg.bin (0x400000+0x11d39d) [0x51d39d]
[ 84544.480] (EE) 12: /usr/bin/Xorg.bin (0x400000+0xca2d5) [0x4ca2d5]
[ 84544.480] (EE) 13: /usr/bin/Xorg.bin (0x400000+0xcb5cf) [0x4cb5cf]
[ 84544.481] (EE) 14: /usr/bin/Xorg.bin (0x400000+0xc8922) [0x4c8922]
[ 84544.481] (EE) 15: /usr/bin/Xorg.bin (ConfigureWindow+0x460) [0x463110]
[ 84544.481] (EE) 16: /usr/bin/Xorg.bin (0x400000+0x32118) [0x432118]
[ 84544.481] (EE) 17: /usr/bin/Xorg.bin (0x400000+0x376d7) [0x4376d7]
[ 84544.481] (EE) 18: /usr/bin/Xorg.bin (0x400000+0x3b866) [0x43b866]
[ 84544.481] (EE) 19: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f2fe3a36000]
[ 84544.481] (EE) 20: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
[ 84544.481] (EE)
[ 84544.481] (EE) Segmentation fault at address 0x74ff0
[ 84544.481] (EE)
Fatal server error:
[ 84544.481] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 84544.481] (EE)
[ 84544.481] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 84544.481] (EE) Please also check the log file at "/home/lijing/.local/share/xorg/Xorg.2.log" for additional information.
[ 84544.481] (EE)
[ 84544.501] (EE) Server terminated with error (1). Closing log file.
后面还有一些日志内写进log文件
g_dbus_connection_real_closed:Romete peer vanished with error:Underlying GIOStream returned 0 bytes on an async read(g-io-error-quark, 0). Exiting

附加信息:
我有一台PC,一台NOTEBOOK, 都升级了.
PC就出现了这个问题,PC的显卡信息
lsmod | grep video
video 17995 1 i915

NOTEBOOK升级以后可以正常使用,但是我发现fcitx的响应速度变慢了,打字太快就会a夹杂着u输入英文(如此句)
NOTEBOOK显卡信息
lsmod | grep video
uvcvideo 69760 0
videobuf2_vmalloc 12720 1 uvcvideo
videobuf2_memops 12471 1 videobuf2_vmalloc
videobuf2_core 39059 1 uvcvideo
v4l2_common 12867 1 videobuf2_core
videodev 111828 3 uvcvideo,v4l2_common,videobuf2_core
media 17894 2 uvcvideo,videodev
i2c_core 41134 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
video 17678 1 i915
usbcore 170936 5 uvcvideo,usbserial,ehci_hcd,ehci_pci,ftdi_sio

Arch Linux

#1 2014-09-03 10:16:03

sna和uxa问题

#2 2014-09-03 19:13:28

Re: sna和uxa问题

#3 2014-09-04 08:55:01

Re: sna和uxa问题

页脚