多出来的/dev/sdb

tiantangzhifeng · 2014-11-28 23:17:53

这两天仔细看了一下启动时的输出，发现最开始（在welcome to Arch之前）有个 "/dev/sdb not found"的错误提示。而且会在这里停顿一下，不过最终不影响启动。
在dmesg里面可以看到这样一句：
[ 3.463126] sd 6:0:0:0: [sdb] Attached SCSI removable disk
进入系统后也发现有/dev/sdb这个文件。
但是lsblk、df、fdisk之类的都查不到sdb的信息……这是怎么回事呢？

atmouse · 2014-11-28 23:20:34

不明白你想问什么。。。

为什么不把dmesg贴出来？

tiantangzhifeng · 2014-11-28 23:31:29

atmouse 说：

不明白你想问什么。。。
为什么不把dmesg贴出来？

我想问的是，这个/dev/sdb是什么东西，哪里来的？我没有连接U盘，内置硬盘是sda。
抱歉，我觉得dmesg里面东西太多，可能影响阅读。

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/Arch-ArchRoot rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c85defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c85df000-0x00000000c8a6efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8a6f000-0x00000000c8bf7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8bf8000-0x00000000c910bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c910c000-0x00000000c9874fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9875000-0x00000000c9875fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9876000-0x00000000c98b8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c98b9000-0x00000000c9cc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9cc2000-0x00000000c9ff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. K45VD/K45VD, BIOS 233 09/24/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x32fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 7 base 330000000 mask FF0000000 uncachable
[ 0.000000] 8 base 32FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x32fc00000-0x32fdfffff]
[ 0.000000] [mem 0x32fc00000-0x32fdfffff] page 2M
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x32c000000-0x32fbfffff]
[ 0.000000] [mem 0x32c000000-0x32fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
[ 0.000000] [mem 0x300000000-0x32bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc85defff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc83fffff] page 2M
[ 0.000000] [mem 0xc8400000-0xc85defff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc8a6f000-0xc8bf7fff]
[ 0.000000] [mem 0xc8a6f000-0xc8bf7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9875000-0xc9875fff]
[ 0.000000] [mem 0xc9875000-0xc9875fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc98b9000-0xc9cc1fff]
[ 0.000000] [mem 0xc98b9000-0xc99fffff] page 4k
[ 0.000000] [mem 0xc9a00000-0xc9bfffff] page 2M
[ 0.000000] [mem 0xc9c00000-0xc9cc1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9ff4000-0xc9ffffff]
[ 0.000000] [mem 0xc9ff4000-0xc9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x36fae000-0x377cefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C8C7C080 000084 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C8C8B290 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C8C7C1A0 00F0EE (v02 _ASUS_ Notebook 00000022 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000C90FE080 000040
[ 0.000000] ACPI: APIC 0x00000000C8C8B3A0 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C8C8B418 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000C8C8B460 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C8C8B4A0 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 0x00000000C8C8BB90 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C8C8BBC8 000342 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C8C8BF10 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8C8C8C0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8C8D358 000776 (v01 SgRef SgTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8C8DAD0 0013A8 (v01 OptRef OptTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: SLIC 0x00000000C8C8EE78 000176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x32fdfffff]
[ 0.000000] NODE_DATA [mem 0x32fded000-0x32fdf0fff]
[ 0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323400000-ffff88032f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x32fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc85defff]
[ 0.000000] node 0: [mem 0xc8a6f000-0xc8bf7fff]
[ 0.000000] node 0: [mem 0xc9875000-0xc9875fff]
[ 0.000000] node 0: [mem 0xc98b9000-0xc9cc1fff]
[ 0.000000] node 0: [mem 0xc9ff4000-0xc9ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x32fdfffff]
[ 0.000000] On node 0 totalpages: 3114777
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12774 pages used for memmap
[ 0.000000] DMA32 zone: 817533 pages, LIFO batch:31
[ 0.000000] Normal zone: 35832 pages used for memmap
[ 0.000000] Normal zone: 2293248 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcb200000-0xcf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc85df000-0xc8a6efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8bf8000-0xc910bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc910c000-0xc9874fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9876000-0xc98b8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9cc2000-0xc9ff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88032fa00000 s86848 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3066086
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/Arch-ArchRoot rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12175784K/12459108K available (5386K kernel code, 896K rwdata, 1712K rodata, 1140K init, 1176K bss, 283324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 50331648 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2594.187 MHz processor
[ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.55 BogoMIPS (lpj=8647290)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000041] ACPI: Core revision 20140724
[ 0.010623] ACPI: All ACPI Tables successfully acquired
[ 0.014397] Security Framework initialized
[ 0.014402] Yama: becoming mindful.
[ 0.015269] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.019050] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.020754] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.020771] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.020969] Initializing cgroup subsys memory
[ 0.020974] Initializing cgroup subsys devices
[ 0.020976] Initializing cgroup subsys freezer
[ 0.020978] Initializing cgroup subsys net_cls
[ 0.020980] Initializing cgroup subsys blkio
[ 0.020999] CPU: Physical Processor ID: 0
[ 0.021000] CPU: Processor Core ID: 0
[ 0.021004] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.021346] mce: CPU supports 7 MCE banks
[ 0.021356] CPU0: Thermal monitoring enabled (TM1)
[ 0.021363] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.021472] Freeing SMP alternatives memory: 20K (ffffffff819ff000 - ffffffff81a04000)
[ 0.022335] ftrace: allocating 20686 entries in 81 pages
[ 0.031799] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064826] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
[ 0.064833] TSC deadline timer enabled
[ 0.064856] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.064874] ... version: 3
[ 0.064875] ... bit width: 48
[ 0.064876] ... generic registers: 4
[ 0.064877] ... value mask: 0000ffffffffffff
[ 0.064878] ... max period: 0000ffffffffffff
[ 0.064878] ... fixed-purpose events: 3
[ 0.064879] ... event mask: 000000070000000f
[ 0.084945] x86: Booting SMP configuration:
[ 0.084947] .... node #0, CPUs: #1
[ 0.098433] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.105134] #2 #3
[ 0.138877] x86: Booted up 1 node, 4 CPUs
[ 0.138881] smpboot: Total of 4 processors activated (20761.22 BogoMIPS)
[ 0.141937] devtmpfs: initialized
[ 0.144643] PM: Registering ACPI NVS region [mem 0xc8bf8000-0xc910bfff] (5324800 bytes)
[ 0.144696] PM: Registering ACPI NVS region [mem 0xc9876000-0xc98b8fff] (274432 bytes)
[ 0.145462] pinctrl core: initialized pinctrl subsystem
[ 0.145500] RTC time: 22:55:25, date: 11/28/14
[ 0.145574] NET: Registered protocol family 16
[ 0.145673] cpuidle: using governor ladder
[ 0.145676] cpuidle: using governor menu
[ 0.145701] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.145702] ACPI: bus type PCI registered
[ 0.145704] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.145768] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.145770] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.145842] PCI: Using configuration type 1 for base access
[ 0.159210] ACPI: Added _OSI(Module Device)
[ 0.159211] ACPI: Added _OSI(Processor Device)
[ 0.159212] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.159213] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.162341] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.216346] ACPI: Dynamic OEM Table Load:
[ 0.216353] ACPI: SSDT 0xFFFF88031E0FA000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.229203] ACPI: Dynamic OEM Table Load:
[ 0.229207] ACPI: SSDT 0xFFFF88031E12D000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.242443] ACPI: Dynamic OEM Table Load:
[ 0.242447] ACPI: SSDT 0xFFFF88031E0CA800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.256315] ACPI: Interpreter enabled
[ 0.256322] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.256325] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.256338] ACPI: (supports S0 S3 S4 S5)
[ 0.256339] ACPI: Using IOAPIC for interrupt routing
[ 0.256360] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.414493] ACPI: Power Resource [FN00] (off)
[ 0.414560] ACPI: Power Resource [FN01] (off)
[ 0.414626] ACPI: Power Resource [FN02] (off)
[ 0.414691] ACPI: Power Resource [FN03] (off)
[ 0.414754] ACPI: Power Resource [FN04] (off)
[ 0.415230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.415235] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.415428] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.415541] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.416087] PCI host bridge to bus 0000:00
[ 0.416090] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.416091] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.416093] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.416094] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.416096] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.416097] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.416099] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.416100] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.416101] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.416103] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.416104] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
[ 0.416111] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.416193] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.416223] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.416260] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.416299] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.416308] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.416313] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.416317] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.416412] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.416433] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.416503] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.416542] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.416581] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.416604] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[ 0.416680] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.416762] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.416783] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[ 0.416872] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.416923] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.416960] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.416977] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.417050] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.417092] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.417126] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.417206] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.417250] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.417284] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.417364] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.417408] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.417452] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.417473] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[ 0.417562] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.417612] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.417648] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.417819] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.417838] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.417845] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.417853] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.417861] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.417869] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.417877] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[ 0.417921] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.417987] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.418003] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[ 0.418024] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.418148] pci 0000:01:00.0: [10de:1058] type 00 class 0x030000
[ 0.418160] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.418171] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.418183] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.418190] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.418198] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.418265] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.422617] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.422622] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.422626] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.422633] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.422782] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.422864] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.422986] pci 0000:02:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.423062] pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.423447] pci 0000:02:00.0: supports D1 D2
[ 0.423448] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.423585] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.429345] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.429349] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.429353] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.429455] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.429499] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
[ 0.429586] pci 0000:03:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
[ 0.429704] pci 0000:03:00.0: supports D1 D2
[ 0.429705] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.429748] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.435983] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.436003] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.436031] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.506260] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.506303] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.506345] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.506386] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.506427] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.506469] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.506511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.506553] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.506817] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.506856] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.506952] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.506954] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.506958] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.506959] vgaarb: loaded
[ 0.506960] vgaarb: bridge control possible 0000:01:00.0
[ 0.506961] vgaarb: no bridge control possible 0000:00:02.0
[ 0.506997] PCI: Using ACPI for IRQ routing
[ 0.508487] PCI: pci_cache_line_size set to 64 bytes
[ 0.508533] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.508535] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.508536] e820: reserve RAM buffer [mem 0xc85df000-0xcbffffff]
[ 0.508538] e820: reserve RAM buffer [mem 0xc8bf8000-0xcbffffff]
[ 0.508539] e820: reserve RAM buffer [mem 0xc9876000-0xcbffffff]
[ 0.508541] e820: reserve RAM buffer [mem 0xc9cc2000-0xcbffffff]
[ 0.508542] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 0.508543] e820: reserve RAM buffer [mem 0x32fe00000-0x32fffffff]
[ 0.508629] NetLabel: Initializing
[ 0.508631] NetLabel: domain hash size = 128
[ 0.508631] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.508643] NetLabel: unlabeled traffic allowed by default
[ 0.508665] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.508670] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.511700] Switched to clocksource hpet
[ 0.515906] pnp: PnP ACPI init
[ 0.516000] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.516003] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.516072] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.516073] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.516075] system 00:01: [io 0xffff] has been reserved
[ 0.516077] system 00:01: [io 0xffff] has been reserved
[ 0.516078] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.516080] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.516082] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.516083] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.516085] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.516111] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.516152] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.516154] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.516195] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.516198] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[ 0.516200] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.516249] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[ 0.516280] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.585341] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.585343] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.585345] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.585346] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.585348] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.585350] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.585351] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.585353] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.585354] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[ 0.585356] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.585358] system 00:07: [mem 0xcf200000-0xcf200fff] has been reserved
[ 0.585360] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.585483] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.585484] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.585486] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.585522] pnp: PnP ACPI: found 9 devices
[ 0.591803] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.591806] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.591808] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.591811] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.591814] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.591816] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.591821] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.591830] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.591835] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.591844] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.591845] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.591847] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.591848] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.591850] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.591851] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.591853] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.591854] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.591855] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.591857] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
[ 0.591859] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.591860] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.591861] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.591863] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.591865] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.591866] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.591886] NET: Registered protocol family 2
[ 0.592082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.592292] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.592398] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.592416] TCP: reno registered
[ 0.592431] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.592479] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.592553] NET: Registered protocol family 1
[ 0.592568] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.625234] PCI: CLS 64 bytes, default 64
[ 0.625276] Unpacking initramfs...
[ 0.750403] Freeing initrd memory: 8324K (ffff880036fae000 - ffff8800377cf000)
[ 0.750412] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.750415] software IO TLB [mem 0xc45df000-0xc85df000] (64MB) mapped at [ffff8800c45df000-ffff8800c85defff]
[ 0.750637] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.750675] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 0.750682] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 0.750689] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 0.750697] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 0.750748] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.750769] Scanning for low memory corruption every 60 seconds
[ 0.750975] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.750989] Initialise system trusted keyring
[ 0.751311] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.752443] zpool: loaded
[ 0.752445] zbud: loaded
[ 0.752595] VFS: Disk quotas dquot_6.5.2
[ 0.752623] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.752728] msgmni has been set to 23797
[ 0.752776] Key type big_key registered
[ 0.752921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.752957] io scheduler noop registered
[ 0.752960] io scheduler deadline registered
[ 0.752985] io scheduler cfq registered (default)
[ 0.753128] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.753385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.753398] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.753430] intel_idle: MWAIT substates: 0x21120
[ 0.753431] intel_idle: v0.4 model 0x3A
[ 0.753432] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.753593] GHES: HEST is not enabled!
[ 0.753653] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.754012] Linux agpgart interface v0.103
[ 0.754053] rtc_cmos 00:02: RTC can wake from S4
[ 0.754173] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.754201] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.754211] Intel P-state driver initializing.
[ 0.754340] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.754533] TCP: cubic registered
[ 0.754697] NET: Registered protocol family 10
[ 0.755061] NET: Registered protocol family 17
[ 0.755705] Loading compiled-in X.509 certificates
[ 0.755727] registered taskstats version 1
[ 0.756505] Magic number: 6:362:958
[ 0.756643] rtc_cmos 00:02: setting system clock to 2014-11-28 22:55:25 UTC (1417215325)
[ 0.756794] PM: Hibernation image not present or could not be loaded.
[ 0.758158] Freeing unused kernel memory: 1140K (ffffffff818e2000 - ffffffff819ff000)
[ 0.758161] Write protecting the kernel read-only data: 8192k
[ 0.761468] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 0.762860] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.774253] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.805322] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.817941] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.818026] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.818139] ACPI: bus type USB registered
[ 0.818181] usbcore: registered new interface driver usbfs
[ 0.818195] usbcore: registered new interface driver hub
[ 0.818384] usbcore: registered new device driver usb
[ 0.819072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.819350] ehci-pci: EHCI PCI platform driver
[ 0.819585] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.819597] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.819619] ehci-pci 0000:00:1a.0: debug port 2
[ 0.820749] SCSI subsystem initialized
[ 0.823544] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.823570] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[ 0.823683] libata version 3.00 loaded.
[ 0.831954] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.832403] hub 1-0:1.0: USB hub found
[ 0.832580] hub 1-0:1.0: 2 ports detected
[ 0.833188] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.833198] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.833216] ehci-pci 0000:00:1d.0: debug port 2
[ 0.837514] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.837538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[ 0.845295] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.845592] hub 2-0:1.0: USB hub found
[ 0.845607] hub 2-0:1.0: 2 ports detected
[ 0.845986] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.845997] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.846111] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.846142] xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
[ 0.846427] hub 3-0:1.0: USB hub found
[ 0.846443] hub 3-0:1.0: 4 ports detected
[ 0.846911] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.846916] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.847096] hub 4-0:1.0: USB hub found
[ 0.847112] hub 4-0:1.0: 4 ports detected
[ 0.847513] ahci 0000:00:1f.2: version 3.0
[ 0.847666] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.847691] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.849375] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.858701] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.858706] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 0.866236] scsi host0: ahci
[ 0.866402] scsi host1: ahci
[ 0.866535] scsi host2: ahci
[ 0.866671] scsi host3: ahci
[ 0.866816] scsi host4: ahci
[ 0.866962] scsi host5: ahci
[ 0.867029] ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 26
[ 0.867031] ata2: DUMMY
[ 0.867034] ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 26
[ 0.867035] ata4: DUMMY
[ 0.867036] ata5: DUMMY
[ 0.867037] ata6: DUMMY
[ 1.138954] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.185583] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.187184] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.187192] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.187196] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.231600] ata1.00: ATA-8: TOSHIBA MQ01ABD050, AX002J, max UDMA/100
[ 1.231606] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.233609] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.233617] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.233621] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.235232] ata1.00: configured for UDMA/100
[ 1.235623] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 2J PQ: 0 ANSI: 5
[ 1.263368] hub 1-1:1.0: USB hub found
[ 1.263567] hub 1-1:1.0: 6 ports detected
[ 1.369038] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.493317] hub 2-1:1.0: USB hub found
[ 1.493527] hub 2-1:1.0: 6 ports detected
[ 1.555826] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.560162] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208DN, AS00, max UDMA/100
[ 1.570231] ata3.00: configured for UDMA/100
[ 1.591577] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208DN AS00 PQ: 0 ANSI: 5
[ 1.612249] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.612257] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.612405] sd 0:0:0:0: [sda] Write Protect is off
[ 1.612409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.612463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.623714] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.623721] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.624033] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.652587] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.659746] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.661189] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.752583] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 1.828818] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.828826] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.830347] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.834302] usbcore: registered new interface driver usbhid
[ 1.834305] usbhid: USB HID core driver
[ 1.835062] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:24AE:2002.0001/input/input2
[ 1.835143] hid-generic 0003:24AE:2002.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:14.0-3/input0
[ 1.835407] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:24AE:2002.0002/input/input3
[ 1.835541] hid-generic 0003:24AE:2002.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:14.0-3/input1
[ 1.989521] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 2.434116] usbcore: registered new interface driver usb-storage
[ 2.434640] usbcore: registered new interface driver uas
[ 2.435074] ums-realtek 3-4:1.0: USB Mass Storage device detected
[ 2.450392] scsi host6: usb-storage 3-4:1.0
[ 2.450546] usbcore: registered new interface driver ums-realtek
[ 2.467671] device-mapper: uevent: version 1.0.3
[ 2.467819] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.509936] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 2.753531] Switched to clocksource tsc
[ 3.168685] random: nonblocking pool is initialized
[ 3.456738] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.463126] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.820149] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.701565] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[ 4.742654] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[ 4.743008] systemd[1]: Detected architecture 'x86-64'.
[ 4.770211] systemd[1]: Set hostname to <arce-notebook>.
[ 5.654257] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.654967] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.655158] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.655188] systemd[1]: Starting Remote File Systems.
[ 5.655591] systemd[1]: Reached target Remote File Systems.
[ 5.655609] systemd[1]: Expecting device sys-subsystem-net-devices-p4p1.device...
[ 5.655870] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.656307] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.656334] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.656380] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.656394] systemd[1]: Starting Paths.
[ 5.656711] systemd[1]: Reached target Paths.
[ 5.656727] systemd[1]: Starting Encrypted Volumes.
[ 5.657058] systemd[1]: Reached target Encrypted Volumes.
[ 5.657074] systemd[1]: Expecting device dev-mapper-Arch\x2dArchSwap.device...
[ 5.657319] systemd[1]: Expecting device dev-mapper-Arch\x2dArchHome.device...
[ 5.657562] systemd[1]: Starting Root Slice.
[ 5.668748] systemd[1]: Created slice Root Slice.
[ 5.668766] systemd[1]: Starting User and Session Slice.
[ 5.669289] systemd[1]: Created slice User and Session Slice.
[ 5.669303] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.669677] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.669691] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.670036] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.670049] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.670396] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.670408] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.670761] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.670773] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.671113] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.671131] systemd[1]: Starting udev Control Socket.
[ 5.671468] systemd[1]: Listening on udev Control Socket.
[ 5.671484] systemd[1]: Starting udev Kernel Socket.
[ 5.671829] systemd[1]: Listening on udev Kernel Socket.
[ 5.671847] systemd[1]: Starting Journal Socket.
[ 5.672197] systemd[1]: Listening on Journal Socket.
[ 5.672220] systemd[1]: Starting System Slice.
[ 5.672735] systemd[1]: Created slice System Slice.
[ 5.672750] systemd[1]: Starting system-dhcpcd.slice.
[ 5.673272] systemd[1]: Created slice system-dhcpcd.slice.
[ 5.673286] systemd[1]: Starting system-getty.slice.
[ 5.673805] systemd[1]: Created slice system-getty.slice.
[ 5.673825] systemd[1]: Started File System Check on Root Device.
[ 5.673835] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.674354] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.674373] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.675072] systemd[1]: Starting udev Coldplug all Devices...
[ 5.675926] systemd[1]: Mounting Debug File System...
[ 5.799986] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.801048] systemd[1]: Starting Setup Virtual Console...
[ 5.801805] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.802695] systemd[1]: Mounting Huge Pages File System...
[ 5.852190] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.853142] systemd[1]: Started Load Kernel Modules.
[ 5.853207] systemd[1]: Starting Apply Kernel Variables...
[ 5.854230] systemd[1]: Mounted FUSE Control File System.
[ 5.854333] systemd[1]: Mounting Configuration File System...
[ 5.855143] systemd[1]: Starting Journal Service...
[ 5.856073] systemd[1]: Starting Slices.
[ 5.856447] systemd[1]: Reached target Slices.
[ 5.872423] systemd[1]: Mounting Temporary Directory...
[ 5.908150] systemd[1]: Started udev Coldplug all Devices.
[ 5.950044] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.462932] systemd[1]: Started Setup Virtual Console.
[ 6.500379] systemd[1]: Started Apply Kernel Variables.
[ 6.522407] systemd[1]: Mounted Debug File System.
[ 6.523143] systemd[1]: Mounted Configuration File System.
[ 6.540144] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 6.541111] systemd[1]: Mounted Huge Pages File System.
[ 6.541482] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.541814] systemd[1]: Mounted Temporary Directory.
[ 6.542793] systemd[1]: Started Remount Root and Kernel File Systems.
[ 6.619318] systemd[1]: Started Rebuild Hardware Database.
[ 6.619378] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 6.619399] systemd[1]: Starting Load/Save Random Seed...
[ 6.620639] systemd[1]: Started First Boot Wizard.
[ 6.620684] systemd[1]: Started Create System Users.
[ 6.620776] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.734510] systemd[1]: Started Load/Save Random Seed.
[ 7.055490] systemd[1]: Started Create Static Device Nodes in /dev.
[ 7.056687] systemd[1]: Starting udev Kernel Device Manager...
[ 7.057597] systemd[1]: Starting Local File Systems (Pre).
[ 7.057950] systemd[1]: Reached target Local File Systems (Pre).
[ 7.595370] systemd[1]: Started udev Kernel Device Manager.
[ 7.702993] systemd[1]: Started Journal Service.
[ 7.833459] systemd-journald[197]: Received request to flush runtime journal from PID 1
[ 8.092136] wmi: Mapper loaded
[ 8.483130] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.494687] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 8.494692] ACPI: Power Button [PWRB]
[ 8.494734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 8.494770] ACPI: Lid Switch [LID0]
[ 8.494805] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 8.494807] ACPI: Sleep Button [SLPB]
[ 8.494841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 8.494843] ACPI: Power Button [PWRF]
[ 8.784579] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.784582] ACPI: Thermal Zone [TZ00] (28 C)
[ 8.784829] thermal LNXTHERM:01: registered as thermal_zone1
[ 8.784831] ACPI: Thermal Zone [TZ01] (65 C)
[ 8.804979] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[ 8.804987] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.804991] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 8.804996] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140724/utaddress-258)
[ 8.805000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.805001] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 8.805004] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140724/utaddress-258)
[ 8.805008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.805009] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 8.805012] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140724/utaddress-258)
[ 8.805016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.805017] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.824071] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f0bf (\_SB_.SMB0) (20140724/utaddress-258)
[ 8.824082] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 8.824089] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.967433] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[ 9.083399] [drm] Initialized drm 1.1.0 20060810
[ 9.184197] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 9.184268] ACPI: Battery Slot [BAT1] (battery present)
[ 9.206330] ACPI: Fan [FAN0] (off)
[ 9.206383] ACPI: Fan [FAN1] (off)
[ 9.206428] ACPI: Fan [FAN2] (off)
[ 9.206472] ACPI: Fan [FAN3] (off)
[ 9.206515] ACPI: Fan [FAN4] (off)
[ 9.304143] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[ 9.324180] ACPI: AC Adapter [ACAD] (on-line)
[ 9.377263] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.377272] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.377532] r8169 0000:02:00.0: irq 29 for MSI/MSI-X
[ 9.377758] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018c0000, 60:a4:4c:7d:4b:0f, XID 0c900800 IRQ 29
[ 9.377761] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.544618] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.556233] media: Linux media interface: v0.10
[ 9.569130] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.569133] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.569135] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.569136] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.569137] sound hdaudioC0D0: inputs:
[ 9.569138] sound hdaudioC0D0: Mic=0x18
[ 9.569140] sound hdaudioC0D0: Internal Mic=0x12
[ 9.612499] [drm] Memory usable by graphics device = 2048M
[ 9.612502] [drm] Replacing VGA console driver
[ 9.613352] Console: switching to colour dummy device 80x25
[ 9.624658] mousedev: PS/2 mouse device common for all mice
[ 9.631090] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 9.631098] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.631099] [drm] Driver supports precise vblank timestamp query.
[ 9.631204] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.636130] AVX version of gcm_enc/dec engaged.
[ 9.669202] fbcon: inteldrmfb (fb0) is primary device
[ 9.854795] Linux video capture interface: v2.00
[ 9.946314] cfg80211: Calling CRDA to update world regulatory domain
[ 9.970827] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.970873] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.970914] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.001129] MXM: GUID detected in BIOS
[ 10.001171] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 10.001184] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM
[ 10.001238] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 10.001308] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 10.001476] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 10.001478] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 10.104831] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[ 10.121908] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[ 10.121960] usbcore: registered new interface driver uvcvideo
[ 10.121961] USB Video Class driver (1.1.1)
[ 10.141225] iTCO_vendor_support: vendor-support=0
[ 10.143266] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.143300] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.143396] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.167324] asus_wmi: ASUS WMI generic driver loaded
[ 10.186125] asus_wmi: Initialization: 0x1
[ 10.186162] asus_wmi: BIOS WMI version: 7.8
[ 10.186194] asus_wmi: SFUN value: 0x4a0077
[ 10.186657] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[ 10.187608] asus_wmi: Backlight controlled by ACPI video driver
[ 10.223757] ath: phy0: Disable PLL PowerSave
[ 10.230378] ath: phy0: Enable LNA combining
[ 10.231624] ath: EEPROM regdomain: 0x60
[ 10.231624] ath: EEPROM indicates we should expect a direct regpair map
[ 10.231625] ath: Country alpha2 being used: 00
[ 10.231625] ath: Regpair used: 0x60
[ 10.267266] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 10.290201] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.290579] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90017380000, irq=17
[ 10.385483] Console: switching to colour frame buffer device 170x48
[ 10.390476] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.390478] i915 0000:00:02.0: registered panic notifier
[ 10.390575] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 10.401994] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 10.422630] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 10.422714] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input15
[ 10.423866] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.423970] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
[ 10.424061] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 10.424487] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9180a1
[ 10.424491] nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
[ 10.424493] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 10.424529] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 10.424539] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.424541] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 10.521286] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 10.521290] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 10.666606] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 10.669910] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 10.693215] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[ 10.812276] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 10.871417] intel_rapl: Found RAPL domain package
[ 10.871422] intel_rapl: Found RAPL domain core
[ 10.871425] intel_rapl: Found RAPL domain uncore
[ 11.426315] Adding 2928636k swap on /dev/mapper/Arch-ArchSwap. Priority:-1 extents:1 across:2928636k FS
[ 12.833513] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 14.381443] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 14.381452] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 14.381617] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 14.381622] nouveau [ VBIOS][0000:01:00.0] version 75.19.3f.00.07
[ 14.382643] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 14.382654] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 14.521875] nouveau 0000:01:00.0: irq 31 for MSI/MSI-X
[ 14.521888] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 14.521923] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff88031c746000] reclocking of this ram type unsupported
[ 14.521925] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 14.521926] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 14.521927] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 14.523464] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 14.552580] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 14.552589] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 14.552599] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 14.552627] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[ 14.552634] nouveau [ CLK][0000:01:00.0] 0f: core 475 MHz memory 800 MHz
[ 14.552778] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[ 14.555956] vga_switcheroo: enabled
[ 14.556047] [TTM] Zone kernel: Available graphics memory: 6093176 kiB
[ 14.556048] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.556049] [TTM] Initializing pool allocator
[ 14.556052] [TTM] Initializing DMA pool allocator
[ 14.556069] nouveau [ DRM] VRAM: 2048 MiB
[ 14.556070] nouveau [ DRM] GART: 1048576 MiB
[ 14.556073] nouveau [ DRM] TMDS table version 2.0
[ 14.556074] nouveau [ DRM] DCB version 4.0
[ 14.556076] nouveau [ DRM] DCB outp 00: 02000300 00000000
[ 14.556077] nouveau [ DRM] DCB conn 00: 00000000
[ 14.556722] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.556723] [drm] Driver supports precise vblank timestamp query.
[ 14.561863] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.602598] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff8803195ad800
[ 14.602681] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 14.602691] [drm] Initialized nouveau 1.2.0 20120801 for 0000:01:00.0 on minor 1
[ 15.073443] r8169 0000:02:00.0 enp2s0: link down
[ 15.073488] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 15.088309] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 20.358146] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 20.358677] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 20.358691] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 33.353353] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 33.353815] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 33.353832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 50.236573] cfg80211: Calling CRDA to update world regulatory domain
[ 76.867045] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 80.963278] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 82.039440] wlp3s0: authenticate with c0:61:18:47:b0:c8
[ 82.062590] wlp3s0: send auth to c0:61:18:47:b0:c8 (try 1/3)
[ 82.064945] wlp3s0: authenticated
[ 82.065250] wlp3s0: associate with c0:61:18:47:b0:c8 (try 1/3)
[ 82.070137] wlp3s0: RX AssocResp from c0:61:18:47:b0:c8 (capab=0x431 status=0 aid=5)
[ 82.070285] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 82.070361] wlp3s0: associated
[ 89.556480] fuse init (API version 7.23)

依云 · 2014-11-28 23:45:17

知道影响阅读还不贴到 p a s t e 网站？

atmouse · 2014-11-29 00:06:29

scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS

你要把u盘拔掉，或者是什么不能用的读卡器把

tiantangzhifeng · 2014-11-29 00:33:36

atmouse 说：

scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
你要把u盘拔掉，或者是什么不能用的读卡器把

3q，那应该是我电脑自带的读卡器了。

tiantangzhifeng · 2014-11-29 00:34:53

百合仙子说：

知道影响阅读还不贴到 p a s t e 网站？

这个paste有点厉害

wxg4net · 2014-11-30 11:34:36

这个提示其实我这边也有。或许通过调整log输出等级可以干掉

renyuneyun · 2014-11-30 13:17:28

至少把那段輸出用某些 bbcode（例如 code 標籤）引起來啊……
這樣直接扔出來真心太影響閱讀了……

knight · 2014-12-19 12:55:27

楼主不会用的是本子吧，自带读卡器？
以前本子上U盘都是从/dev/sdc开始的。

Arch Linux

#1 2014-11-28 23:17:53

多出来的/dev/sdb

#2 2014-11-28 23:20:34

Re: 多出来的/dev/sdb

#3 2014-11-28 23:31:29

Re: 多出来的/dev/sdb

#4 2014-11-28 23:45:17

Re: 多出来的/dev/sdb

#5 2014-11-29 00:06:29

Re: 多出来的/dev/sdb

#6 2014-11-29 00:33:36

Re: 多出来的/dev/sdb

#7 2014-11-29 00:34:53

Re: 多出来的/dev/sdb

#8 2014-11-30 11:34:36

Re: 多出来的/dev/sdb

#9 2014-11-30 13:17:28

Re: 多出来的/dev/sdb

#10 2014-12-19 12:55:27

Re: 多出来的/dev/sdb

页脚