#1 2015-07-31 18:44:02
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
arch 安装gnome 黑屏
我安装了 gnomes gnomes-extra xorg-server xorg-twm xorg-xclock xterm gdm xf86-video-vesa openbox。 arch wiki说的我都按了 用startx 进去就只看到鼠标 剩下的就是一片黑 过一会就弹出 log out 看教程 说看 Xorg.0.log 看了也查了 还是没明白为什么 黑屏。 因此请求高手 帮忙 看看 哪里有问题
[ 24791.943]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 24791.952] X Protocol Version 11, Revision 0
[ 24791.956] Build Operating System: Linux 4.0.4-2-ARCH i686
[ 24791.961] Current Operating System: Linux puppy 4.1.2-2-ARCH #1 SMP PREEMPT Wed Jul 15 08:51:45 UTC 2015 i686
[ 24791.962] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4db36a8c-6f36-4c47-a918-e605a2fe9666 rw quiet
[ 24791.971] Build Date: 17 July 2015 05:40:14PM
[ 24791.975]
[ 24791.978] Current version of pixman: 0.32.6
[ 24791.982] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24791.983] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24791.995] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 31 17:11:00 2015
[ 24792.001] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24792.003] (==) No Layout section. Using the first Screen section.
[ 24792.003] (==) No screen section available. Using defaults.
[ 24792.003] (**) |-->Screen "Default Screen Section" (0)
[ 24792.003] (**) | |-->Monitor "<default monitor>"
[ 24792.004] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24792.004] (==) Automatically adding devices
[ 24792.004] (==) Automatically enabling devices
[ 24792.005] (==) Automatically adding GPU devices
[ 24792.005] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24792.005] Entry deleted from font path.
[ 24792.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24792.006] Entry deleted from font path.
[ 24792.006] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24792.006] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24792.006] Entry deleted from font path.
[ 24792.006] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24792.006] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 24792.006] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24792.007] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24792.007] (II) Loader magic: 0x829f6c0
[ 24792.007] (II) Module ABI versions:
[ 24792.007] X.Org ANSI C Emulation: 0.4
[ 24792.007] X.Org Video Driver: 19.0
[ 24792.008] X.Org XInput driver : 21.1
[ 24792.008] X.Org Server Extension : 9.0
[ 24792.052] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24792.074] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216
[ 24792.076] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24792.077] (II) LoadModule: "glx"
[ 24792.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24792.089] (II) Module glx: vendor="X.Org Foundation"
[ 24792.091] compiled for 1.17.2, module version = 1.0.0
[ 24792.091] ABI class: X.Org Server Extension, version 9.0
[ 24792.091] (==) AIGLX enabled
[ 24792.091] (==) Matched vboxvideo as autoconfigured driver 0
[ 24792.092] (==) Matched modesetting as autoconfigured driver 1
[ 24792.092] (==) Matched fbdev as autoconfigured driver 2
[ 24792.092] (==) Matched vesa as autoconfigured driver 3
[ 24792.092] (==) Assigned the driver to the xf86ConfigLayout
[ 24792.092] (II) LoadModule: "vboxvideo"
[ 24792.094] (WW) Warning, couldn't open module vboxvideo
[ 24792.095] (II) UnloadModule: "vboxvideo"
[ 24792.095] (II) Unloading vboxvideo
[ 24792.095] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[ 24792.095] (II) LoadModule: "modesetting"
[ 24792.096] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24792.098] (II) Module modesetting: vendor="X.Org Foundation"
[ 24792.098] compiled for 1.17.2, module version = 1.17.2
[ 24792.099] Module class: X.Org Video Driver
[ 24792.099] ABI class: X.Org Video Driver, version 19.0
[ 24792.099] (II) LoadModule: "fbdev"
[ 24792.102] (WW) Warning, couldn't open module fbdev
[ 24792.103] (II) UnloadModule: "fbdev"
[ 24792.103] (II) Unloading fbdev
[ 24792.104] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 24792.104] (II) LoadModule: "vesa"
[ 24792.105] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24792.106] (II) Module vesa: vendor="X.Org Foundation"
[ 24792.106] compiled for 1.17.2, module version = 2.3.4
[ 24792.106] Module class: X.Org Video Driver
[ 24792.106] ABI class: X.Org Video Driver, version 19.0
[ 24792.107] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24792.107] (II) VESA: driver for VESA chipsets: vesa
[ 24792.107] (++) using VT number 1
[ 24792.108] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 24792.109] (EE) open /dev/dri/card0: No such file or directory
[ 24792.110] (WW) Falling back to old probe method for modesetting
[ 24792.110] (EE) open /dev/dri/card0: No such file or directory
[ 24792.118] (EE) Screen 0 deleted because of no matching config section.
[ 24792.119] (II) UnloadModule: "modesetting"
[ 24792.120] (II) Loading sub module "vbe"
[ 24792.120] (II) LoadModule: "vbe"
[ 24792.121] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 24792.122] (II) Module vbe: vendor="X.Org Foundation"
[ 24792.122] compiled for 1.17.2, module version = 1.1.0
[ 24792.122] ABI class: X.Org Video Driver, version 19.0
[ 24792.122] (II) Loading sub module "int10"
[ 24792.122] (II) LoadModule: "int10"
[ 24792.123] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 24792.125] (II) Module int10: vendor="X.Org Foundation"
[ 24792.125] compiled for 1.17.2, module version = 1.0.0
[ 24792.126] ABI class: X.Org Video Driver, version 19.0
[ 24792.126] (II) VESA(0): initializing int10
[ 24792.129] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 24792.139] (II) VESA(0): VESA BIOS detected
[ 24792.142] (II) VESA(0): VESA VBE Version 2.0
[ 24792.142] (II) VESA(0): VESA VBE Total Mem: 12288 kB
[ 24792.142] (II) VESA(0): VESA VBE OEM: VirtualBox VESA BIOS
[ 24792.142] (II) VESA(0): VESA VBE OEM Software Rev: 0.3
[ 24792.142] (II) VESA(0): VESA VBE OEM Vendor: Oracle Corporation
[ 24792.142] (II) VESA(0): VESA VBE OEM Product: Oracle VM VirtualBox VBE Adapter
[ 24792.142] (II) VESA(0): VESA VBE OEM Product Rev: Oracle VM VirtualBox Version 5.0.0
[ 24792.393] (II) VESA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 24792.395] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[ 24792.395] (==) VESA(0): RGB weight 888
[ 24792.395] (==) VESA(0): Default visual is TrueColor
[ 24792.395] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 24792.395] (II) Loading sub module "ddc"
[ 24792.396] (II) LoadModule: "ddc"
[ 24792.396] (II) Module "ddc" already built-in
[ 24792.397] (II) VESA(0): VESA VBE DDC not supported
[ 24792.398] (II) VESA(0): VESA VBE PanelID invalid
[ 24792.398] (II) VESA(0): Searching for matching VESA mode(s):
[ 24792.403] Mode: 100 (640x400)离线
#2 2015-07-31 19:19:07
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch 安装gnome 黑屏
xorg-xclock 安装了没呢？另外你安装你显卡对应的驱动试试。
离线
#3 2015-07-31 19:34:24
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
安装了 好的。不好意思 系统是安装在虚拟机的
最近编辑记录 XC (2015-07-31 19:38:20)
离线
#4 2015-07-31 23:30:39
- cjxgm
- 忙，却还想养猫？
- 所在地： 杭州
- 注册时间： 2011-08-19
- 帖子： 417
- 个人网站
Re: arch 安装gnome 黑屏
XC 说：
xf86-video-vesa
不要用 vesa 驱动
vmware 的话装 xf86-video-vmware （参见https://wiki.archlinux.org/index.php/VM … figuration）
virtualbox 的话装 virtualbox-guest-utils，然后 systemctl enable vboxservice 重启（参见https://wiki.archlinux.org/index.php/Vi … nux_guests）
最近编辑记录 cjxgm (2015-07-31 23:35:04)
Giumo Clanjor (哆啦比猫/兰威举)
Where there is a hacker, there is art. | Dogfooding myself. (C++ / Lua / Perl / Rust)
离线
#5 2015-08-01 01:38:31
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
还是不行 鼠标 键盘 都没问题 显示什么也没有 一会儿就出现个 log out按钮
离线
#6 2015-08-01 06:47:25
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch 安装gnome 黑屏
XC 说：
还是不行 鼠标 键盘 都没问题 显示什么也没有 一会儿就出现个 log out按钮
出现按钮的话说明显示驱动没问题。截图看看？
离线
#7 2015-08-01 13:26:59
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
离线
#8 2015-08-01 13:53:42
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch 安装gnome 黑屏
你在用 startx 进 GNOME？为何不用 gdm 或者 lightdm？
离线
#9 2015-08-01 13:56:48
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
关键就是不会用 愁死我了 -_-
离线
#10 2015-08-01 14:01:11
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch 安装gnome 黑屏
XC 说：
关键就是不会用 愁死我了 -_-
安装了再 systemctl start lightdm 就好吧。
离线
#11 2015-08-01 14:12:41
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
这是报错吗？？？
离线
#12 2015-08-01 14:34:16
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch 安装gnome 黑屏
XC 说：
这是报错吗？？？
是啊。用给出的命令查详情。
离线
#13 2015-08-01 14:53:57
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
以前也看到过 从没有用过systemclt status lightdm.service
输出出来 也没看懂 是高亮的是错的吗？？？
离线
#14 2015-08-01 16:19:51
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch 安装gnome 黑屏
你的终端太窄了。
journalctl -u lightdm -n 20 -l 看看/
离线
#15 2015-08-01 16:25:43
- XC
- 会员
- 注册时间： 2015-07-31
- 帖子： 18
Re: arch 安装gnome 黑屏
这到底是什么意思 为什么还有高亮 高亮的是错 的？？？？？？
真的搞不懂
离线