页次： 1
#1 2017-06-22 16:55:49
- zyson
- 会员
- 注册时间： 2017-06-22
- 帖子： 3
arch用到一半死机，然后自动注销了
ASUS的笔记本电脑
以前就有这个问题，最近越来越频繁了，主要就是平时在操作的时候（大多是在浏览chrome网页）突然一卡，就自动注销退回到gdm的登录界面了。刚才编辑发帖的时候又自动注销了一次。不知道是硬件问题还是arch那里的配置有问题。
gnome桌面环境版本3.24.2，btrfs的文件系统。
查看dmesg中只能找到疑似报错：
gnome-shell[20901]: segfault at 7f3902cfffe8 ip 00007f398885d 7e5 sp 00007ffc7fac83d0 error 4 in libgjs.so.0.0.0[7f3988825000+bc000] 下面是完整的dmesg
[ 0.000000] Linux version 4.11.6-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170516 (GCC) ) #1 SMP PREEMPT Sat Jun 17 08:19:42 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0927423d-1cc4-450c-8d6d-b3228d571fa1 rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8d9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8d9d000-0x00000000b8da3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b8da4000-0x00000000b91defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b91df000-0x00000000b95a3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b95a4000-0x00000000c8e0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8e10000-0x00000000c8e9bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8e9c000-0x00000000c8ebafff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c8ebb000-0x00000000c9807fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c9808000-0x00000000c9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X450JF/X450JF, BIOS 218 10/08/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0220000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CB000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 022FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[ 0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE
[ 0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] BRK [0x01d47000, 0x01d47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x374c9000-0x37a5bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C8EA2090 0000A4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C8EB2220 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C8EA21C8 010055 (v02 _ASUS_ Notebook 00000218 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000C97FA080 000040
[ 0.000000] ACPI: APIC 0x00000000C8EB2330 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C8EB23C8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MSDM 0x00000000C8EB2410 000055 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000C8EB2468 00005C (v01 _ASUS_ Notebook 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C8EB24C8 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C8EB26F0 00018F (v01 Intel zpodd 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C8EB2880 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C8EB2DC0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C8EB3898 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C8EB38D8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C8EB3910 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C8EB3C28 00371C (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C8EB7348 001462 (v01 SgRef SgPeg 00001000 INTL 20120711)
[ 0.000000] ACPI: DMAR 0x00000000C8EB87B0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C8EB8868 001899 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22fdf6000-0x22fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b8d9cfff]
[ 0.000000] node 0: [mem 0x00000000b8da4000-0x00000000b91defff]
[ 0.000000] node 0: [mem 0x00000000b95a4000-0x00000000c8e0ffff]
[ 0.000000] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[ 0.000000] On node 0 totalpages: 2066401
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12778 pages used for memmap
[ 0.000000] DMA32 zone: 817733 pages, LIFO batch:31
[ 0.000000] Normal zone: 19448 pages used for memmap
[ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb8d9d000-0xb8da3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb91df000-0xb95a3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8e10000-0xc8e9bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8e9c000-0xc8ebafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8ebb000-0xc9807fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9808000-0xc9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88022fa00000 s103256 r8192 d31912 u262144
[ 0.000000] pcpu-alloc: s103256 r8192 d31912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034090
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0927423d-1cc4-450c-8d6d-b3228d571fa1 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8047964K/8265604K available (6485K kernel code, 1091K rwdata, 2020K rodata, 1304K init, 904K bss, 217640K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2394.520 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.58 BogoMIPS (lpj=7981733)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170119
[ 0.014266] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.014286] Security Framework initialized
[ 0.014287] Yama: becoming mindful.
[ 0.014559] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015639] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016124] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016129] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016301] CPU: Physical Processor ID: 0
[ 0.016301] CPU: Processor Core ID: 0
[ 0.016304] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.016305] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016308] mce: CPU supports 9 MCE banks
[ 0.016315] CPU0: Thermal monitoring enabled (TM1)
[ 0.016326] process: using mwait in idle threads
[ 0.016327] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.016328] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.016419] Freeing SMP alternatives memory: 24K
[ 0.017231] ftrace: allocating 25551 entries in 100 pages
[ 0.023376] smpboot: Max logical packages: 2
[ 0.023379] DMAR: Host address width 39
[ 0.023380] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.023385] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.023386] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.023388] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.023389] DMAR: RMRR base: 0x000000c9e6e000 end: 0x000000c9e7cfff
[ 0.023389] DMAR: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
[ 0.023392] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.023393] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.023393] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.023630] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.023631] x2apic enabled
[ 0.023635] Switched APIC routing to cluster x2apic.
[ 0.024068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059008] TSC deadline timer enabled
[ 0.059010] smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.070018] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.070041] ... version: 3
[ 0.070042] ... bit width: 48
[ 0.070042] ... generic registers: 4
[ 0.070043] ... value mask: 0000ffffffffffff
[ 0.070043] ... max period: 00007fffffffffff
[ 0.070044] ... fixed-purpose events: 3
[ 0.070044] ... event mask: 000000070000000f
[ 0.090105] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096682] smp: Bringing up secondary CPUs ...
[ 0.123355] x86: Booting SMP configuration:
[ 0.123355] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.866681] smp: Brought up 1 node, 8 CPUs
[ 0.866681] smpboot: Total of 8 processors activated (38335.27 BogoMIPS)
[ 0.870101] sched_clock: Marking stable (869999914, 0)->(870155393, -155479)
[ 0.870328] devtmpfs: initialized
[ 0.870360] x86/mm: Memory block size: 128MB
[ 0.871771] PM: Registering ACPI NVS region [mem 0xb8d9d000-0xb8da3fff] (28672 bytes)
[ 0.871772] PM: Registering ACPI NVS region [mem 0xc8ebb000-0xc9807fff] (9752576 bytes)
[ 0.871897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.871905] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.871954] pinctrl core: initialized pinctrl subsystem
[ 0.871990] RTC time: 2:49:30, date: 06/22/17
[ 0.872051] NET: Registered protocol family 16
[ 0.872170] cpuidle: using governor ladder
[ 0.872186] cpuidle: using governor menu
[ 0.872188] PCCT header not found.
[ 0.872213] ACPI: bus type PCI registered
[ 0.872214] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.872266] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.872267] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.872271] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.872317] PCI: Using configuration type 1 for base access
[ 0.872352] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.873016] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.873017] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.873181] ACPI: Added _OSI(Module Device)
[ 0.873181] ACPI: Added _OSI(Processor Device)
[ 0.873182] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.873183] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.873360] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.877650] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.878752] ACPI: Dynamic OEM Table Load:
[ 0.878757] ACPI: SSDT 0xFFFF880225B5C000 0003EE (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.879017] ACPI: Dynamic OEM Table Load:
[ 0.879021] ACPI: SSDT 0xFFFF8802259DD800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.879265] ACPI: Dynamic OEM Table Load:
[ 0.879268] ACPI: SSDT 0xFFFF8802259CA000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.880342] ACPI : EC: EC started
[ 0.880343] ACPI : EC: interrupt blocked
[ 0.885498] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.885499] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.885500] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.885501] ACPI: Interpreter enabled
[ 0.885529] ACPI: (supports S0 S3 S4 S5)
[ 0.885530] ACPI: Using IOAPIC for interrupt routing
[ 0.885552] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.890059] ACPI: Power Resource [PG00] (on)
[ 0.893240] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.893244] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.893732] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.894014] PCI host bridge to bus 0000:00
[ 0.894016] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.894016] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.894017] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.894018] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.894019] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.894019] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.894020] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.894020] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.894021] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.894022] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.894023] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.894028] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.894094] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.894120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.894179] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.894207] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.894214] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.894218] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.894221] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.894278] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.894283] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.894363] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.894378] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.894430] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.894458] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.894484] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.894500] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[ 0.894555] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.894614] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.894629] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[ 0.894703] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.894746] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.894774] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.894788] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.894848] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.894881] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.894906] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.894969] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.895022] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.895045] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.895108] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.895159] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.895181] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.895243] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.895294] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.895326] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.895341] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.895415] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.895458] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.895486] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.895626] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.895637] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.895643] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.895650] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.895656] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.895661] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.895668] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[ 0.895698] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.895748] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.895761] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[ 0.895778] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.895879] pci 0000:01:00.0: [10de:0fe3] type 00 class 0x030200
[ 0.895892] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.895904] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.895916] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.895924] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.895931] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.896034] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.896069] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.896071] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.896072] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.896074] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.896128] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.896207] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.896243] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ 0.896322] pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ 0.896445] pci 0000:03:00.0: supports D1 D2
[ 0.896446] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.896503] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.014720] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.014725] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 1.015027] pci 0000:04:00.0: [1969:10a1] type 00 class 0x020000
[ 1.015398] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]
[ 1.015496] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 1.016534] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.016872] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 1.024792] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.024795] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.024798] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.025651] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.025703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.025759] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.025809] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.025861] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.025912] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.025949] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.025991] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 1.026182] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 1.026221] ACPI : EC: interrupt unblocked
[ 1.026230] ACPI : EC: event unblocked
[ 1.026236] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.026236] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.026291] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.026292] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.026294] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.026294] vgaarb: loaded
[ 1.026336] PCI: Using ACPI for IRQ routing
[ 1.027558] PCI: pci_cache_line_size set to 64 bytes
[ 1.027712] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 1.027713] e820: reserve RAM buffer [mem 0xb8d9d000-0xbbffffff]
[ 1.027714] e820: reserve RAM buffer [mem 0xb91df000-0xbbffffff]
[ 1.027714] e820: reserve RAM buffer [mem 0xc8e10000-0xcbffffff]
[ 1.027715] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 1.027716] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ 1.027778] NetLabel: Initializing
[ 1.027779] NetLabel: domain hash size = 128
[ 1.027779] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.027791] NetLabel: unlabeled traffic allowed by default
[ 1.027833] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.027837] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.030866] clocksource: Switched to clocksource hpet
[ 1.037075] VFS: Disk quotas dquot_6.6.0
[ 1.037089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.037141] pnp: PnP ACPI init
[ 1.037222] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.037225] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.037366] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.037367] system 00:01: [io 0xffff] has been reserved
[ 1.037368] system 00:01: [io 0xffff] has been reserved
[ 1.037369] system 00:01: [io 0xffff] has been reserved
[ 1.037370] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 1.037370] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 1.037371] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 1.037372] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 1.037373] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 1.037373] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.037375] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.037388] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.037420] system 00:03: [io 0x1854-0x1857] has been reserved
[ 1.037422] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.037448] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.037449] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.037492] pnp 00:05: Plug and Play ACPI device, IDs ATK3001 PNP0303 (active)
[ 1.037521] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0300 SYN0302 SYN0002 PNP0f13 PNP0f03 (active)
[ 1.037912] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.037913] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.037914] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.037915] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.037916] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.037917] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.037918] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.037919] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.037920] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 1.037921] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.037922] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 1.037923] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.037925] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.038157] pnp: PnP ACPI: found 8 devices
[ 1.044208] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.044226] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1.044228] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 1.044229] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 1.044251] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[ 1.044255] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 1.044256] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.044258] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.044259] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.044261] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.044262] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.044265] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.044272] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.044276] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
[ 1.044279] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 1.044284] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.044288] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 1.044294] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.044296] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.044300] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.044307] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.044308] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.044309] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.044309] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 1.044310] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 1.044311] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 1.044311] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 1.044312] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 1.044313] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 1.044314] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff window]
[ 1.044314] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.044315] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.044316] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.044317] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.044317] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
[ 1.044318] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 1.044319] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[ 1.044320] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.044320] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[ 1.044394] NET: Registered protocol family 2
[ 1.044499] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.044579] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.044689] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.044709] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.044728] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.044768] NET: Registered protocol family 1
[ 1.044777] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.084361] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.084403] PCI: CLS 64 bytes, default 64
[ 1.084441] Unpacking initramfs...
[ 1.147343] Freeing initrd memory: 5708K
[ 1.147365] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.147367] software IO TLB [mem 0xc4e10000-0xc8e10000] (64MB) mapped at [ffff8800c4e10000-ffff8800c8e0ffff]
[ 1.147587] Scanning for low memory corruption every 60 seconds
[ 1.147992] Initialise system trusted keyrings
[ 1.148045] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.148717] zbud: loaded
[ 1.149195] Key type asymmetric registered
[ 1.149202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.149226] io scheduler noop registered
[ 1.149226] io scheduler deadline registered
[ 1.149242] io scheduler cfq registered (default)
[ 1.149243] io scheduler mq-deadline registered
[ 1.149863] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[ 1.149875] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[ 1.149886] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 1.149897] pcieport 0000:00:1c.3: Signaling PME with IRQ 29
[ 1.149915] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.149942] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 1.149943] vesafb: scrolling: redraw
[ 1.149944] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.149954] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001800000, using 4160k, total 4160k
[ 1.216813] Console: switching to colour frame buffer device 170x48
[ 1.283445] fb0: VESA VGA frame buffer device
[ 1.283454] intel_idle: MWAIT substates: 0x42120
[ 1.283454] intel_idle: v0.4.1 model 0x3C
[ 1.283703] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.283822] GHES: HEST is not enabled!
[ 1.283873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.284222] Linux agpgart interface v0.103
[ 1.284633] rtc_cmos 00:02: RTC can wake from S4
[ 1.284744] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.284772] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.284779] intel_pstate: Intel P-state driver initializing
[ 1.285161] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.285610] NET: Registered protocol family 10
[ 1.293671] Segment Routing with IPv6
[ 1.293714] NET: Registered protocol family 17
[ 1.295197] microcode: sig=0x306c3, pf=0x20, revision=0x12
[ 1.295538] microcode: Microcode Update Driver: v2.2.
[ 1.295966] registered taskstats version 1
[ 1.295980] Loading compiled-in X.509 certificates
[ 1.296018] zswap: loaded using pool lzo/zbud
[ 1.297422] Magic number: 5:649:814
[ 1.297621] rtc_cmos 00:02: setting system clock to 2017-06-22 02:49:30 UTC (1498099770)
[ 1.297715] PM: Hibernation image not present or could not be loaded.
[ 1.299743] Freeing unused kernel memory: 1304K
[ 1.299745] Write protecting the kernel read-only data: 10240k
[ 1.300575] Freeing unused kernel memory: 1692K
[ 1.300772] Freeing unused kernel memory: 28K
[ 1.313113] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.314912] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.314951] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.315690] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.315706] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.318234] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.318249] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.318253] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.318450] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.318463] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340934] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.354397] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.354438] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.354456] ACPI: bus type USB registered
[ 1.354478] usbcore: registered new interface driver usbfs
[ 1.354486] usbcore: registered new interface driver hub
[ 1.354512] usbcore: registered new device driver usb
[ 1.354615] SCSI subsystem initialized
[ 1.354915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.355269] ehci-pci: EHCI PCI platform driver
[ 1.355424] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.355429] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.355439] ehci-pci 0000:00:1a.0: debug port 2
[ 1.356026] libata version 3.00 loaded.
[ 1.359355] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.359370] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[ 1.370927] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.371116] hub 1-0:1.0: USB hub found
[ 1.371121] hub 1-0:1.0: 2 ports detected
[ 1.371394] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.371403] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.371414] ehci-pci 0000:00:1d.0: debug port 2
[ 1.372922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.375313] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.375327] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 1.387619] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.387839] hub 2-0:1.0: USB hub found
[ 1.387844] hub 2-0:1.0: 2 ports detected
[ 1.388203] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.388212] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.389333] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.389339] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.389612] hub 3-0:1.0: USB hub found
[ 1.389629] hub 3-0:1.0: 14 ports detected
[ 1.394850] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.394854] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.395072] hub 4-0:1.0: USB hub found
[ 1.395090] hub 4-0:1.0: 4 ports detected
[ 1.396355] ahci 0000:00:1f.2: version 3.0
[ 1.396679] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x24 impl SATA mode
[ 1.396683] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.405286] scsi host0: ahci
[ 1.405504] scsi host1: ahci
[ 1.405648] scsi host2: ahci
[ 1.405793] scsi host3: ahci
[ 1.405932] scsi host4: ahci
[ 1.406092] scsi host5: ahci
[ 1.406138] ata1: DUMMY
[ 1.406139] ata2: DUMMY
[ 1.406142] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 31
[ 1.406142] ata4: DUMMY
[ 1.406143] ata5: DUMMY
[ 1.406145] ata6: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a380 irq 31
[ 1.690955] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.710942] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.714268] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 1.718877] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.718905] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.720500] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.720505] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.720508] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.721560] ata3.00: ATAPI: HL-DT-ST DVDRAM GU71N, AS00, max UDMA/133
[ 1.721771] ata6.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 1.721775] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.723535] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.723540] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.723543] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.724853] ata6.00: configured for UDMA/133
[ 1.726461] ata3.00: configured for UDMA/133
[ 1.733992] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GU71N AS00 PQ: 0 ANSI: 5
[ 1.749782] scsi 5:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 1.791400] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.791407] sd 5:0:0:0: [sda] 4096-byte physical blocks
[ 1.791466] sd 5:0:0:0: [sda] Write Protect is off
[ 1.791471] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.791558] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.808874] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.808875] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.808999] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.831990] hub 1-1:1.0: USB hub found
[ 1.832167] hub 1-1:1.0: 6 ports detected
[ 1.848198] hub 2-1:1.0: USB hub found
[ 1.848278] hub 2-1:1.0: 8 ports detected
[ 1.851929] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.856894] usbcore: registered new interface driver usbhid
[ 1.856896] usbhid: USB HID core driver
[ 1.857495] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:1C4F:0002.0001/input/input2
[ 1.911001] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-1/input0
[ 1.911149] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:1C4F:0002.0002/input/input3
[ 1.934065] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda2 sda3
[ 1.935389] sd 5:0:0:0: [sda] Attached SCSI disk
[ 1.967734] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-1/input1
[ 2.017590] usb 3-3: new low-speed USB device number 3 using xhci_hcd
[ 2.154230] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:093A:2521.0003/input/input4
[ 2.154319] hid-generic 0003:093A:2521.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:14.0-3/input0
[ 2.164242] tsc: Refined TSC clocksource calibration: 2394.454 MHz
[ 2.164253] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c0783fd, max_idle_ns: 440795301468 ns
[ 2.267551] usb 3-9: new high-speed USB device number 4 using xhci_hcd
[ 2.498171] random: fast init done
[ 3.177658] clocksource: Switched to clocksource tsc
[ 3.977319] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 4.415605] random: crng init done
[ 5.270353] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.325062] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.325194] systemd[1]: Detected architecture x86-64.
[ 5.346480] systemd[1]: Set hostname to <zyson-pc>.
[ 6.863033] systemd[1]: Listening on Process Core Dump Socket.
[ 6.863108] systemd[1]: Listening on Journal Socket.
[ 6.863138] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.863466] systemd[1]: Created slice System Slice.
[ 6.863587] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.863692] systemd[1]: Created slice system-getty.slice.
[ 6.863727] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.237586] EXT4-fs (sda11): re-mounted. Opts: data=ordered
[ 7.289199] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 7.289252] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 7.332307] vboxguest: loading out-of-tree module taints kernel.
[ 7.333739] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.368857] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.591135] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.689023] vboxdrv: Found 8 processor cores
[ 7.707438] vboxdrv: TSC mode is Invariant, tentative frequency 2394452825 Hz
[ 7.707439] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 7.738194] VBoxPciLinuxInit
[ 7.750036] vboxpci: IOMMU not found (not registered)
[ 7.866754] VBoxNetAdp: Successfully started.
[ 7.888993] VBoxNetFlt: Successfully started.
[ 8.731936] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 8.731939] ACPI: Power Button [PWRB]
[ 8.732076] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 8.732110] ACPI: Lid Switch [LID0]
[ 8.732139] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 8.732140] ACPI: Sleep Button [SLPB]
[ 8.732163] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 8.732164] ACPI: Power Button [PWRF]
[ 8.797900] wmi: Mapper loaded
[ 8.830160] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input9
[ 9.029148] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170119/utaddress-247)
[ 9.029153] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.029160] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170119/utaddress-247)
[ 9.029162] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170119/utaddress-247)
[ 9.029164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.029165] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170119/utaddress-247)
[ 9.029166] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170119/utaddress-247)
[ 9.029168] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170119/utaddress-247)
[ 9.029170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.029170] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170119/utaddress-247)
[ 9.029172] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170119/utaddress-247)
[ 9.029174] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170119/utaddress-247)
[ 9.029175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.029176] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.029706] ACPI: AC Adapter [ADP1] (on-line)
[ 9.034231] EDAC MC: Ver: 3.0.0
[ 9.037618] EDAC ie31200: No ECC support
[ 9.044592] ACPI: Battery Slot [BAT0] (battery present)
[ 9.101077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.103076] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.103131] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.103132] ACPI: Thermal Zone [TZ00] (39 C)
[ 9.103286] thermal LNXTHERM:01: registered as thermal_zone1
[ 9.103286] ACPI: Thermal Zone [TZ01] (25 C)
[ 9.151054] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 9.151078] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 9.284414] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 9.318012] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [e0:3f:49:38:00:37]
[ 9.397413] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 9.397414] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 9.397415] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 9.397415] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 9.397415] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 9.522358] [drm] Memory usable by graphics device = 2048M
[ 9.522360] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 9.522361] fb: switching to inteldrmfb from VESA VGA
[ 9.522376] Console: switching to colour dummy device 80x25
[ 9.522438] [drm] Replacing VGA console driver
[ 9.528036] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.528036] [drm] Driver supports precise vblank timestamp query.
[ 9.530345] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.555112] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 9.555226] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.556079] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.556084] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
[ 9.556092] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802270eebb8), AE_NOT_FOUND (20170119/psparse-543)
[ 9.556246] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input12
[ 9.557345] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.557504] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 9.557577] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.579429] fbcon: inteldrmfb (fb0) is primary device
[ 10.089254] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.089255] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.089256] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.089256] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 10.089257] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 10.089258] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 10.089258] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 10.098391] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 10.098424] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 10.098486] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 10.098511] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 10.098537] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 10.098561] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 10.098587] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 10.346027] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 10.362286] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[ 10.378609] psmouse serio1: elantech: Elan sample query result 03, 23, 75
[ 10.462932] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 10.545178] ath: phy0: Disable PLL PowerSave
[ 10.552833] ath: phy0: Enable LNA combining
[ 10.554085] ath: phy0: ASPM enabled: 0x43
[ 10.554086] ath: EEPROM regdomain: 0x60
[ 10.554087] ath: EEPROM indicates we should expect a direct regpair map
[ 10.554088] ath: Country alpha2 being used: 00
[ 10.554088] ath: Regpair used: 0x60
[ 10.667546] Console: switching to colour frame buffer device 170x48
[ 10.702735] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.841426] AVX2 version of gcm_enc/dec engaged.
[ 10.841428] AES CTR mode by8 optimization enabled
[ 10.872094] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.872375] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001f80000, irq=18
[ 10.963279] iTCO_vendor_support: vendor-support=0
[ 10.964128] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.964160] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 10.964234] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.346404] asus_wmi: ASUS WMI generic driver loaded
[ 11.518431] alx 0000:04:00.0 enp4s0: renamed from eth0
[ 11.558351] asus_wmi: Initialization: 0x1
[ 11.558399] asus_wmi: BIOS WMI version: 8.1
[ 11.558434] asus_wmi: SFUN value: 0x4a0875
[ 11.559186] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input21
[ 11.559775] asus_wmi: Number of fans: 0
[ 11.805728] nvidia: module license 'NVIDIA' taints kernel.
[ 11.805730] Disabling lock debugging due to kernel taint
[ 11.811972] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[ 11.812240] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 381.22 Thu May 4 00:55:03 PDT 2017 (using threaded interrupts)
[ 12.592444] Adding 4194300k swap on /dev/sda8. Priority:-1 extents:1 across:4194300k FS
[ 12.648306] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 381.22 Thu May 4 00:21:48 PDT 2017
[ 12.657893] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 12.657895] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 12.827615] intel_rapl: Found RAPL domain package
[ 12.827617] intel_rapl: Found RAPL domain core
[ 12.827618] intel_rapl: Found RAPL domain uncore
[ 12.827620] intel_rapl: Found RAPL domain dram
[ 12.827623] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 12.827628] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 12.912493] mousedev: PS/2 mouse device common for all mice
[ 13.019886] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 14.135873] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: data=ordered
[ 14.281565] systemd-journald[217]: Received request to flush runtime journal from PID 1
[ 14.299488] media: Linux media interface: v0.10
[ 14.313994] Linux video capture interface: v2.00
[ 14.418018] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[ 14.609740] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
[ 14.614927] uvcvideo 3-9:1.0: Entity type for entity Extension 4 was not initialized!
[ 14.614929] uvcvideo 3-9:1.0: Entity type for entity Processing 2 was not initialized!
[ 14.614930] uvcvideo 3-9:1.0: Entity type for entity Camera 1 was not initialized!
[ 14.614990] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input22
[ 14.615034] usbcore: registered new interface driver uvcvideo
[ 14.615035] USB Video Class driver (1.1.1)
[ 15.057881] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: data=ordered
[ 19.864574] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 19.880326] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 23.338937] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 23.345776] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 23.374360] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 23.713788] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 24.936761] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 26.102920] wlp3s0: authenticate with d4:ee:07:09:f9:82
[ 26.122481] wlp3s0: send auth to d4:ee:07:09:f9:82 (try 1/3)
[ 26.124632] wlp3s0: authenticated
[ 26.130183] wlp3s0: associate with d4:ee:07:09:f9:82 (try 1/3)
[ 26.135369] wlp3s0: RX AssocResp from d4:ee:07:09:f9:82 (capab=0x411 status=0 aid=4)
[ 26.135499] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 26.135553] wlp3s0: associated
[ 60.335556] fuse init (API version 7.26)
[ 1096.152450] wlp3s0: deauthenticated from d4:ee:07:09:f9:82 (Reason: 8=DISASSOC_STA_HAS_LEFT)
[ 1097.446454] wlp3s0: authenticate with d4:ee:07:09:f9:82
[ 1097.467165] wlp3s0: send auth to d4:ee:07:09:f9:82 (try 1/3)
[ 1097.469329] wlp3s0: authenticated
[ 1097.471398] wlp3s0: associate with d4:ee:07:09:f9:82 (try 1/3)
[ 1097.475351] wlp3s0: RX AssocResp from d4:ee:07:09:f9:82 (capab=0x411 status=0 aid=4)
[ 1097.475522] wlp3s0: associated
[11220.595615] IPv6: ADDRCONF(NETDEV_UP): vboxnet0: link is not ready
[11221.561648] IPv6: ADDRCONF(NETDEV_UP): vboxnet0: link is not ready
[11226.086929] IPv6: ADDRCONF(NETDEV_UP): vboxnet0: link is not ready
[11228.371631] SUPR0GipMap: fGetGipCpu=0xb
[11228.873971] vboxdrv: ffffffffa15b1020 VMMR0.r0
[11228.990473] VBoxNetFlt: attached to 'vboxnet0' / 0a:00:27:00:00:00
[11228.990485] IPv6: ADDRCONF(NETDEV_CHANGE): vboxnet0: link becomes ready
[11228.990763] device vboxnet0 entered promiscuous mode
[11229.267082] vboxdrv: ffffffffa16c7020 VBoxDDR0.r0
[11900.223530] gnome-shell[910]: segfault at 7f9bba2fffe8 ip 00007f9c5e629735 sp 00007ffdb2a1e4d0 error 4 in libgjs.so.0.0.0[7f9c5e5fe000+bc000]
[11901.774774] QXcbEventReader[6202]: segfault at 7ff83410e8e9 ip 00007ff83410e8e9 sp 00007ff8323c7e80 error 14 in locale-archive[7ff834404000+45d000]
[12162.213501] gnome-shell[7525]: segfault at 7f6e6d8fffe8 ip 00007f6f05488735 sp 00007fff35ebacc0 error 4 in libgjs.so.0.0.0[7f6f0545d000+bc000]
[13003.959646] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
[13004.000186] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.000252] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.000290] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.000337] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.000373] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.000408] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.000431] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[13004.029667] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15534.927805] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266475] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266527] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266554] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266581] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266606] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266644] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.266670] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[15869.267230] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[16172.402576] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637018] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637061] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637087] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637112] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637136] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637172] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637196] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[17188.637591] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[18703.276734] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19143.873309] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[19209.141671] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.141737] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.141777] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.141816] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.141855] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.141911] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.141953] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19209.142474] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[19410.284071] gnome-shell[9221]: segfault at 7f5c305fffe8 ip 00007f5cc596e735 sp 00007fffacf75720 error 4 in libgjs.so.0.0.0[7f5cc5943000+bc000]
[21598.315995] gnome-shell[20901]: segfault at 7f3902cfffe8 ip 00007f398885d7e5 sp 00007ffc7fac83d0 error 4 in libgjs.so.0.0.0[7f3988825000+bc000]这段报错的持续时间内我应该是自动注销了四次。。，不知道是什么原因造成的，该如何解决呢。
最近编辑记录 zyson (2017-06-22 17:12:15)
离线
#2 2017-06-22 21:44:03
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch用到一半死机，然后自动注销了
gnome 的 shell 崩了……
离线
#3 2017-06-22 23:50:35
- zyson
- 会员
- 注册时间： 2017-06-22
- 帖子： 3
Re: arch用到一半死机，然后自动注销了
依云 说：
gnome 的 shell 崩了……
谢谢，我能否从哪里可以看到shell崩溃的原因或者其他详细信息呢？只有这一条报错并没找到解决方案（也可能是我不怎么会找= =）
离线
#4 2017-06-23 13:02:53
- 依云
- 会员
- 所在地： a.k.a. 百合仙子
- 注册时间： 2011-08-21
- 帖子： 8,919
- 个人网站
Re: arch用到一半死机，然后自动注销了
如果你看得懂（或者要去报告 bug）的话，coredumpctl gdb 看。
如果没什么信息，那就要装对应的调试符号了，然而 Arch 并不提供调试符号，所以你得重新编译相关的软件包……
离线
#5 2017-06-27 11:40:06
- zyson
- 会员
- 注册时间： 2017-06-22
- 帖子： 3
Re: arch用到一半死机，然后自动注销了
依云 说：
如果你看得懂（或者要去报告 bug）的话，coredumpctl gdb 看。
如果没什么信息，那就要装对应的调试符号了，然而 Arch 并不提供调试符号，所以你得重新编译相关的软件包……
谢谢=-=照您说的去看了下，确实有报错信息但并不能看懂。目前只能转kde临时使用一段时间了，感谢您的帮助。
离线
页次： 1