页次: 1
台式机一直用双屏,A卡radeon系列,插一台vga显示器和一台hmdi显示器,前天重启,发现vga显示屏黑屏了……(hmdi正常), 经过测试(只插一台显示器)发现VGA口在grub阶段可以显示,但是随后进直接进入黑屏,这是怎么回事哈……
1:只插vga,则grub可见,OS启动进程就黑屏
2:插vga+hmdi,则vga黑屏
3:换用live os ,现象一样
Linux agpgart interface v0.103
[ 0.926755] VFIO - User Level meta-driver version: 0.3
[ 1.011429] [drm] radeon kernel modesetting enabled.
[ 1.011474] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 1.011475] fb: switching to radeondrmfb from VESA VGA
[ 1.011494] Console: switching to colour dummy device 80x25
[ 1.011862] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x7333:0x0000 0x00).
[ 1.011894] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1.011899] caller pci_map_rom+0x6a/0x1b0 mapping multiple BARs
[ 1.011969] ATOM BIOS: CEDAR
[ 1.012009] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
[ 1.012011] radeon 0000:01:00.0: GTT: 1024M 0x0000000008000000 - 0x0000000047FFFFFF
[ 1.012014] [drm] Detected VRAM RAM=128M, BAR=256M
[ 1.012015] [drm] RAM width 32bits DDR
[ 1.012054] [TTM] Zone kernel: Available graphics memory: 7151402 kiB
[ 1.012055] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.012056] [TTM] Initializing pool allocator
[ 1.012061] [TTM] Initializing DMA pool allocator
[ 1.012079] [drm] radeon: 128M of VRAM memory ready
[ 1.012080] [drm] radeon: 1024M of GTT memory ready.
[ 1.012086] [drm] Loading CEDAR Microcode
[ 1.012146] [drm] Internal thermal controller with fan control
[ 1.035356] [drm] radeon: dpm initialized
[ 1.035413] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.035986] [drm] PCIE gen 2 link speeds already enabled
[ 1.054214] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 1.054295] radeon 0000:01:00.0: WB enabled
[ 1.054298] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000008000c00 and cpu addr 0x000000006dc5eb99
[ 1.054299] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000008000c0c and cpu addr 0x00000000dc0cd64f
[ 1.054892] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0000000096abdfb5
[ 1.054893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.054893] [drm] Driver supports precise vblank timestamp query.
[ 1.054894] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.054925] radeon 0000:01:00.0: radeon: using MSI.
[ 1.054943] [drm] radeon: irq initialized.
[ 1.071205] [drm] ring test on 0 succeeded in 1 usecs
[ 1.071209] [drm] ring test on 3 succeeded in 2 usecs
[ 1.258274] [drm] ring test on 5 succeeded in 1 usecs
[ 1.258276] [drm] UVD initialized successfully.
[ 1.258355] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.258379] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.617494] tsc: Refined TSC clocksource calibration: 3192.746 MHz
[ 1.617501] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e058540c6e, max_idle_ns: 440795222505 ns
[ 1.617565] clocksource: Switched to clocksource tsc
[ 1.937530] [drm] ib test on ring 5 succeeded
[ 1.938028] [drm] Radeon Display Connectors
[ 1.938029] [drm] Connector 0:
[ 1.938030] [drm] HDMI-A-1
[ 1.938031] [drm] HPD1
[ 1.938033] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.938033] [drm] Encoders:
[ 1.938034] [drm] DFP1: INTERNAL_UNIPHY1
[ 1.938035] [drm] Connector 1:
[ 1.938036] [drm] DVI-D-1
[ 1.938037] [drm] HPD4
[ 1.938039] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.938039] [drm] Encoders:
[ 1.938040] [drm] DFP2: INTERNAL_UNIPHY
[ 1.938041] [drm] Connector 2:
[ 1.938041] [drm] VGA-1
[ 1.938044] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 1.938044] [drm] Encoders:
[ 1.938045] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.022366] [drm] fb mappable at 0xE034D000
[ 2.022367] [drm] vram apper at 0xE0000000
[ 2.022368] [drm] size 8294400
[ 2.022369] [drm] fb depth is 24
[ 2.022370] [drm] pitch is 7680
[ 2.022505] fbcon: radeondrmfb (fb0) is primary device
[ 2.078638] Console: switching to colour frame buffer device 240x67
[ 2.086523] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.137525] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 2.190551] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
最近编辑记录 lijing48301243 (2019-03-22 12:34:59)
archlinux磨合中
离线
测试了老毛桃系统,估计显卡问题
archlinux磨合中
离线
显卡坏了?
开源/Linux大众化,从驿窗开始~
离线
今天拿了张新的Novall Quadro 600 卡测试,问题解决
不过在中间还是学习了不少知识,
因为我的两个显示器分辨率分别是1920X1080 和1024X768,所以如果同时插着两个显示器,启动的话,X不能自行处理,显示器会报超频(估计),所以只能插1920X1080分辨率的启动,然后在用xrandr点亮第二个显示器。
archlinux磨合中
离线
你自己写conf 啊,如果xrandr能亮第二个屏那为啥不能写成conf
反社会,精神极其不稳定,随时可能炸碎身边所有人
离线
你自己写conf 啊,如果xrandr能亮第二个屏那为啥不能写成conf
Section "Monitor"
Identifier "DVI-I-1"
Modeline "1024x768.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
Option "PreferredMode" "1024x768.00"
Option "LeftOf" "DP-2"
EndSection
Section "Monitor"
Identifier "DP-2"
Modeline "1920x1080.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Option "PreferredMode" "1920x1080.00"
Option "Primary" "true"
Option "DPMS" "true"
EndSection
写好了,多谢多谢
archlinux磨合中
离线
页次: 1