页次： 1
当插入hdmi 的时候，显示器会亮一下，然后显示无信号
笔记本是联想小新 amd 2020版本，没有独立显卡。以前有段时间是使用同一个 usb 扩展坞连接同一个显示是没有问题的，应该是某次更新后就不行了。
xrandr 命令，没有识别到显示器
Screen 0: minimum 320 x 200, current 2560 x 1600, maximum 16384 x 16384
eDP connected primary 2560x1600+0+0 (normal left inverted right x axis y axis) 286mm x 179mm
2560x1600 59.99*+
1920x1200 59.99
1920x1080 59.99
1600x1200 59.99
1680x1050 59.99
1280x1024 59.99
1440x900 59.99
1280x800 59.99
1280x720 59.99
1024x768 59.99
800x600 59.99
640x480 59.99
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)离线
xorg 的日志
[ 21.313]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 21.313] Current Operating System: Linux xinbook 6.2.9-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 30 Mar 2023 14:51:14 +0000 x86_64
[ 21.313] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ca4a3ec6-04de-4962-9916-4fdca222ba9e rw loglevel=5
[ 21.313]
[ 21.314] Current version of pixman: 0.42.2
[ 21.314] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.314] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.315] (==) Log file: "/home/lzf/.local/share/xorg/Xorg.0.log", Time: Sun Apr 2 12:48:47 2023
[ 21.316] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.316] (==) No Layout section. Using the first Screen section.
[ 21.316] (==) No screen section available. Using defaults.
[ 21.316] (**) |-->Screen "Default Screen Section" (0)
[ 21.316] (**) | |-->Monitor "<default monitor>"
[ 21.317] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.317] (==) Automatically adding devices
[ 21.317] (==) Automatically enabling devices
[ 21.317] (==) Automatically adding GPU devices
[ 21.317] (==) Automatically binding GPU devices
[ 21.317] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 21.317] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 21.317] Entry deleted from font path.
[ 21.317] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 21.317] Entry deleted from font path.
[ 21.317] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 21.317] Entry deleted from font path.
[ 21.317] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 21.317] Entry deleted from font path.
[ 21.317] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
[ 21.317] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.317] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.317] (II) Module ABI versions:
[ 21.317] X.Org ANSI C Emulation: 0.4
[ 21.317] X.Org Video Driver: 25.2
[ 21.317] X.Org XInput driver : 24.4
[ 21.317] X.Org Server Extension : 10.0
[ 21.319] (++) using VT number 1
[ 21.320] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 21.322] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.322] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:03:00.0/drm/card0
[ 21.323] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 21.327] (--) PCI:*(3@0:0:0) 1002:1636:17aa:3811 rev 193, Mem @ 0x460000000/268435456, 0x470000000/2097152, 0xfd300000/524288, I/O @ 0x00001000/256
[ 21.328] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.328] (II) LoadModule: "glx"
[ 21.328] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.333] (II) Module glx: vendor="X.Org Foundation"
[ 21.333] compiled for 1.21.1.8, module version = 1.0.0
[ 21.333] ABI class: X.Org Server Extension, version 10.0
[ 21.334] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 21.334] loading driver: amdgpu
[ 21.334] (==) Matched amdgpu as autoconfigured driver 0
[ 21.334] (==) Matched ati as autoconfigured driver 1
[ 21.334] (==) Matched modesetting as autoconfigured driver 2
[ 21.334] (==) Matched fbdev as autoconfigured driver 3
[ 21.334] (==) Matched vesa as autoconfigured driver 4
[ 21.334] (==) Assigned the driver to the xf86ConfigLayout
[ 21.334] (II) LoadModule: "amdgpu"
[ 21.334] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 21.336] (II) Module amdgpu: vendor="X.Org Foundation"
[ 21.336] compiled for 1.21.1.7, module version = 23.0.0
[ 21.336] Module class: X.Org Video Driver
[ 21.336] ABI class: X.Org Video Driver, version 25.2
[ 21.336] (II) LoadModule: "ati"
[ 21.336] (WW) Warning, couldn't open module ati
[ 21.336] (EE) Failed to load module "ati" (module does not exist, 0)
[ 21.337] (II) LoadModule: "modesetting"
[ 21.337] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.337] (II) Module modesetting: vendor="X.Org Foundation"
[ 21.337] compiled for 1.21.1.8, module version = 1.21.1
[ 21.337] Module class: X.Org Video Driver
[ 21.337] ABI class: X.Org Video Driver, version 25.2
[ 21.337] (II) LoadModule: "fbdev"
[ 21.337] (WW) Warning, couldn't open module fbdev
[ 21.337] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 21.337] (II) LoadModule: "vesa"
[ 21.338] (WW) Warning, couldn't open module vesa
[ 21.338] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 21.338] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 21.338] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 21.341] (WW) Falling back to old probe method for modesetting
[ 21.341] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 21.341] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.341] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 21.341] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 21.341] (==) AMDGPU(0): Default visual is TrueColor
[ 21.341] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0
[ 21.341] (==) AMDGPU(0): RGB weight 888
[ 21.341] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 21.341] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1636)
[ 21.341] (II) Loading sub module "fb"
[ 21.341] (II) LoadModule: "fb"
[ 21.341] (II) Module "fb" already built-in
[ 21.341] (II) Loading sub module "dri2"
[ 21.341] (II) LoadModule: "dri2"
[ 21.341] (II) Module "dri2" already built-in
[ 21.486] (II) Loading sub module "glamoregl"
[ 21.486] (II) LoadModule: "glamoregl"
[ 21.486] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 21.494] (II) Module glamoregl: vendor="X.Org Foundation"
[ 21.494] compiled for 1.21.1.8, module version = 1.0.1
[ 21.494] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.516] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (renoir, LLVM 15.0.7, DRM 3.49, 6.2.9-arch1-1)
[ 21.516] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 21.516] (==) AMDGPU(0): TearFree property default: auto
[ 21.516] (==) AMDGPU(0): VariableRefresh: disabled
[ 21.516] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 21.516] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 21.520] (II) AMDGPU(0): Output eDP has no monitor section
[ 21.520] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 21.520] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 21.535] (II) AMDGPU(0): EDID for output eDP
[ 21.535] (II) AMDGPU(0): Manufacturer: CSO Model: 76d Serial#: 0
[ 21.535] (II) AMDGPU(0): Year: 2019 Week: 20
[ 21.535] (II) AMDGPU(0): EDID Version: 1.4
[ 21.535] (II) AMDGPU(0): Digital Display Input
[ 21.535] (II) AMDGPU(0): 8 bits per channel
[ 21.535] (II) AMDGPU(0): Digital interface is DisplayPort
[ 21.535] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 29 vert.: 18
[ 21.535] (II) AMDGPU(0): Gamma: 2.20
[ 21.535] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 21.535] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 21.535] (II) AMDGPU(0): First detailed timing is preferred mode
[ 21.535] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 21.535] (II) AMDGPU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 21.535] (II) AMDGPU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 21.535] (II) AMDGPU(0): Manufacturer's mask: 0
[ 21.535] (II) AMDGPU(0): Supported detailed timing:
[ 21.535] (II) AMDGPU(0): clock: 268.6 MHz Image Size: 286 x 179 mm
[ 21.535] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 21.535] (II) AMDGPU(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 21.535] (II) AMDGPU(0): CSOT T3
[ 21.535] (II) AMDGPU(0): MND307DA1-2
[ 21.535] (II) AMDGPU(0): EDID (in hex):
[ 21.535] (II) AMDGPU(0): 00ffffffffffff000e6f6d0700000000
[ 21.535] (II) AMDGPU(0): 141d0104a51d1278e2ee95a3544c9926
[ 21.535] (II) AMDGPU(0): 0f505400000001010101010101010101
[ 21.535] (II) AMDGPU(0): 010101010101ec6800a0a0402e603020
[ 21.535] (II) AMDGPU(0): 36001eb31000001a0000000000000000
[ 21.535] (II) AMDGPU(0): 00000000000000000000000000fe0043
[ 21.535] (II) AMDGPU(0): 534f542054330a2020202020000000fe
[ 21.535] (II) AMDGPU(0): 004d4e443330374441312d320a200048
[ 21.535] (II) AMDGPU(0): Printing probed modes for output eDP
[ 21.535] (II) AMDGPU(0): Modeline "2560x1600"x60.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)
[ 21.535] (II) AMDGPU(0): Modeline "1920x1200"x60.0 268.60 1920 2608 2640 2720 1200 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.535] (II) AMDGPU(0): Modeline "1920x1080"x60.0 268.60 1920 2608 2640 2720 1080 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.535] (II) AMDGPU(0): Modeline "1600x1200"x60.0 268.60 1600 2608 2640 2720 1200 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.535] (II) AMDGPU(0): Modeline "1680x1050"x60.0 268.60 1680 2608 2640 2720 1050 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.535] (II) AMDGPU(0): Modeline "1280x1024"x60.0 268.60 1280 2608 2640 2720 1024 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.535] (II) AMDGPU(0): Modeline "1440x900"x60.0 268.60 1440 2608 2640 2720 900 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.536] (II) AMDGPU(0): Modeline "1280x800"x60.0 268.60 1280 2608 2640 2720 800 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.536] (II) AMDGPU(0): Modeline "1280x720"x60.0 268.60 1280 2608 2640 2720 720 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.536] (II) AMDGPU(0): Modeline "1024x768"x60.0 268.60 1024 2608 2640 2720 768 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.536] (II) AMDGPU(0): Modeline "800x600"x60.0 268.60 800 2608 2640 2720 600 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.536] (II) AMDGPU(0): Modeline "640x480"x60.0 268.60 640 2608 2640 2720 480 1603 1609 1646 +hsync -vsync (98.8 kHz e)
[ 21.536] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 21.536] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 21.536] (II) AMDGPU(0): Output eDP connected
[ 21.536] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 21.536] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 21.536] (II) AMDGPU(0): Using exact sizes for initial modes
[ 21.536] (II) AMDGPU(0): Output eDP using initial mode 2560x1600 +0+0
[ 21.536] (II) AMDGPU(0): mem size init: gart size :1cf611800 vram size: s:3d771000 visible:3d771000
[ 21.536] (==) AMDGPU(0): DPI set to (96, 96)
[ 21.536] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 21.536] (II) Loading sub module "ramdac"
[ 21.536] (II) LoadModule: "ramdac"
[ 21.536] (II) Module "ramdac" already built-in
[ 21.536] (II) UnloadModule: "modesetting"
[ 21.536] (II) Unloading modesetting
[ 21.536] (II) AMDGPU(0): [DRI2] Setup complete
[ 21.536] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 21.536] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 21.608] (II) AMDGPU(0): Front buffer pitch: 10240 bytes
[ 21.609] (II) AMDGPU(0): SYNC extension fences enabled
[ 21.609] (II) AMDGPU(0): Present extension enabled
[ 21.609] (==) AMDGPU(0): DRI3 enabled
[ 21.609] (==) AMDGPU(0): Backing store enabled
[ 21.609] (II) AMDGPU(0): Direct rendering enabled
[ 21.658] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 21.658] (II) AMDGPU(0): Acceleration enabled
[ 21.658] (==) AMDGPU(0): DPMS enabled
[ 21.658] (==) AMDGPU(0): Silken mouse enabled
[ 21.658] (II) AMDGPU(0): Set up textured video (glamor)
[ 21.666] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[ 21.666] (II) Initializing extension Generic Event Extension
[ 21.666] (II) Initializing extension SHAPE
[ 21.666] (II) Initializing extension MIT-SHM
[ 21.666] (II) Initializing extension XInputExtension
[ 21.666] (II) Initializing extension XTEST
[ 21.667] (II) Initializing extension BIG-REQUESTS
[ 21.667] (II) Initializing extension SYNC
[ 21.667] (II) Initializing extension XKEYBOARD
[ 21.667] (II) Initializing extension XC-MISC
[ 21.667] (II) Initializing extension SECURITY
[ 21.667] (II) Initializing extension XFIXES
[ 21.668] (II) Initializing extension RENDER
[ 21.668] (II) Initializing extension RANDR
[ 21.668] (II) Initializing extension COMPOSITE
[ 21.668] (II) Initializing extension DAMAGE
[ 21.668] (II) Initializing extension MIT-SCREEN-SAVER
[ 21.668] (II) Initializing extension DOUBLE-BUFFER
[ 21.669] (II) Initializing extension RECORD
[ 21.669] (II) Initializing extension DPMS
[ 21.669] (II) Initializing extension Present
[ 21.669] (II) Initializing extension DRI3
[ 21.669] (II) Initializing extension X-Resource
[ 21.669] (II) Initializing extension XVideo
[ 21.670] (II) Initializing extension XVideo-MotionCompensation
[ 21.670] (II) Initializing extension GLX
[ 21.680] (II) AIGLX: Loaded and initialized radeonsi
[ 21.680] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.680] (II) Initializing extension XFree86-VidModeExtension
[ 21.680] (II) Initializing extension XFree86-DGA
[ 21.680] (II) Initializing extension XFree86-DRI
[ 21.680] (II) Initializing extension DRI2
[ 21.681] (II) AMDGPU(0): Setting screen physical size to 677 x 423
[ 21.811] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.811] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.811] (II) LoadModule: "libinput"
[ 21.811] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.815] (II) Module libinput: vendor="X.Org Foundation"
[ 21.815] compiled for 1.21.1.3, module version = 1.2.1
[ 21.815] Module class: X.Org XInput Driver
[ 21.815] ABI class: X.Org XInput driver, version 24.4
[ 21.815] (II) Using input driver 'libinput' for 'Power Button'
[ 21.816] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[ 21.816] (**) Power Button: always reports core events
[ 21.816] (**) Option "Device" "/dev/input/event2"
[ 21.823] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 21.823] (II) event2 - Power Button: device is a keyboard
[ 21.823] (II) event2 - Power Button: device removed
[ 21.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 21.823] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.824] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 21.825] (II) event2 - Power Button: device is a keyboard
[ 21.826] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 21.826] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 21.826] (II) Using input driver 'libinput' for 'Video Bus'
[ 21.827] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 30 paused 0
[ 21.827] (**) Video Bus: always reports core events
[ 21.827] (**) Option "Device" "/dev/input/event6"
[ 21.829] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 21.829] (II) event6 - Video Bus: device is a keyboard
[ 21.829] (II) event6 - Video Bus: device removed
[ 21.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input8/event6"
[ 21.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.831] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 21.831] (II) event6 - Video Bus: device is a keyboard
[ 21.832] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 21.832] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.832] (II) Using input driver 'libinput' for 'Power Button'
[ 21.833] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[ 21.833] (**) Power Button: always reports core events
[ 21.833] (**) Option "Device" "/dev/input/event1"
[ 21.834] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 21.835] (II) event1 - Power Button: device is a keyboard
[ 21.835] (II) event1 - Power Button: device removed
[ 21.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 21.835] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.836] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 21.836] (II) event1 - Power Button: device is a keyboard
[ 21.837] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 21.837] (II) No input driver specified, ignoring this device.
[ 21.837] (II) This device may have been added with another device file.
[ 21.838] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 21.838] (II) No input driver specified, ignoring this device.
[ 21.838] (II) This device may have been added with another device file.
[ 21.839] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event15)
[ 21.839] (II) No input driver specified, ignoring this device.
[ 21.839] (II) This device may have been added with another device file.
[ 21.840] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event4)
[ 21.840] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.840] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[ 21.842] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[ 21.842] (**) SEM USB Keyboard: always reports core events
[ 21.842] (**) Option "Device" "/dev/input/event4"
[ 21.844] (II) event4 - SEM USB Keyboard: is tagged by udev as: Keyboard
[ 21.844] (II) event4 - SEM USB Keyboard: device is a keyboard
[ 21.845] (II) event4 - SEM USB Keyboard: device removed
[ 21.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.0/0003:1A2C:2124.0001/input/input4/event4"
[ 21.845] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 9)
[ 21.847] (II) event4 - SEM USB Keyboard: is tagged by udev as: Keyboard
[ 21.847] (II) event4 - SEM USB Keyboard: device is a keyboard
[ 21.849] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event9)
[ 21.849] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 21.849] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[ 21.850] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 33 paused 0
[ 21.850] (**) SEM USB Keyboard System Control: always reports core events
[ 21.850] (**) Option "Device" "/dev/input/event9"
[ 21.853] (II) event9 - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[ 21.853] (II) event9 - SEM USB Keyboard System Control: device is a keyboard
[ 21.853] (II) event9 - SEM USB Keyboard System Control: device removed
[ 21.853] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.1/0003:1A2C:2124.0003/input/input10/event9"
[ 21.853] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 10)
[ 21.855] (II) event9 - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[ 21.856] (II) event9 - SEM USB Keyboard System Control: device is a keyboard
[ 21.857] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event8)
[ 21.857] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 21.857] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[ 21.859] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 34 paused 0
[ 21.859] (**) SEM USB Keyboard Consumer Control: always reports core events
[ 21.859] (**) Option "Device" "/dev/input/event8"
[ 21.861] (II) event8 - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 21.861] (II) event8 - SEM USB Keyboard Consumer Control: device is a keyboard
[ 21.862] (II) event8 - SEM USB Keyboard Consumer Control: device removed
[ 21.862] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[ 21.862] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.1/0003:1A2C:2124.0003/input/input9/event8"
[ 21.862] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 11)
[ 21.862] (**) Option "AccelerationScheme" "none"
[ 21.862] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[ 21.862] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 21.862] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 21.864] (II) event8 - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 21.864] (II) event8 - SEM USB Keyboard Consumer Control: device is a keyboard
[ 21.866] (II) config/udev: Adding input device XCTECH Wireless Receiver Mouse (/dev/input/event10)
[ 21.866] (**) XCTECH Wireless Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 21.866] (II) Using input driver 'libinput' for 'XCTECH Wireless Receiver Mouse'
[ 21.867] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 35 paused 0
[ 21.867] (**) XCTECH Wireless Receiver Mouse: always reports core events
[ 21.867] (**) Option "Device" "/dev/input/event10"
[ 21.870] (II) event10 - XCTECH Wireless Receiver Mouse: is tagged by udev as: Mouse
[ 21.871] (II) event10 - XCTECH Wireless Receiver Mouse: device is a pointer
[ 21.871] (II) event10 - XCTECH Wireless Receiver Mouse: device removed
[ 21.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input11/event10"
[ 21.871] (II) XINPUT: Adding extended input device "XCTECH Wireless Receiver Mouse" (type: MOUSE, id 12)
[ 21.871] (**) Option "AccelerationScheme" "none"
[ 21.871] (**) XCTECH Wireless Receiver Mouse: (accel) selected scheme none/0
[ 21.871] (**) XCTECH Wireless Receiver Mouse: (accel) acceleration factor: 2.000
[ 21.871] (**) XCTECH Wireless Receiver Mouse: (accel) acceleration threshold: 4
[ 21.874] (II) event10 - XCTECH Wireless Receiver Mouse: is tagged by udev as: Mouse
[ 21.874] (II) event10 - XCTECH Wireless Receiver Mouse: device is a pointer
[ 21.875] (II) config/udev: Adding input device XCTECH Wireless Receiver Mouse (/dev/input/mouse0)
[ 21.875] (II) No input driver specified, ignoring this device.
[ 21.875] (II) This device may have been added with another device file.
[ 21.877] (II) config/udev: Adding input device XCTECH Wireless Receiver Consumer Control (/dev/input/event11)
[ 21.877] (**) XCTECH Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 21.877] (II) Using input driver 'libinput' for 'XCTECH Wireless Receiver Consumer Control'
[ 21.878] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 36 paused 0
[ 21.878] (**) XCTECH Wireless Receiver Consumer Control: always reports core events
[ 21.878] (**) Option "Device" "/dev/input/event11"
[ 21.881] (II) event11 - XCTECH Wireless Receiver Consumer Control: is tagged by udev as: Keyboard
[ 21.881] (II) event11 - XCTECH Wireless Receiver Consumer Control: device is a keyboard
[ 21.881] (II) event11 - XCTECH Wireless Receiver Consumer Control: device removed
[ 21.881] (II) libinput: XCTECH Wireless Receiver Consumer Control: needs a virtual subdevice
[ 21.881] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input12/event11"
[ 21.881] (II) XINPUT: Adding extended input device "XCTECH Wireless Receiver Consumer Control" (type: MOUSE, id 13)
[ 21.881] (**) Option "AccelerationScheme" "none"
[ 21.881] (**) XCTECH Wireless Receiver Consumer Control: (accel) selected scheme none/0
[ 21.882] (**) XCTECH Wireless Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 21.882] (**) XCTECH Wireless Receiver Consumer Control: (accel) acceleration threshold: 4
[ 21.884] (II) event11 - XCTECH Wireless Receiver Consumer Control: is tagged by udev as: Keyboard
[ 21.884] (II) event11 - XCTECH Wireless Receiver Consumer Control: device is a keyboard
[ 21.886] (II) config/udev: Adding input device XCTECH Wireless Receiver System Control (/dev/input/event12)
[ 21.886] (**) XCTECH Wireless Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 21.886] (II) Using input driver 'libinput' for 'XCTECH Wireless Receiver System Control'
[ 21.887] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 37 paused 0
[ 21.887] (**) XCTECH Wireless Receiver System Control: always reports core events
[ 21.887] (**) Option "Device" "/dev/input/event12"
[ 21.890] (II) event12 - XCTECH Wireless Receiver System Control: is tagged by udev as: Keyboard
[ 21.890] (II) event12 - XCTECH Wireless Receiver System Control: device is a keyboard
[ 21.890] (II) event12 - XCTECH Wireless Receiver System Control: device removed
[ 21.890] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input13/event12"
[ 21.890] (II) XINPUT: Adding extended input device "XCTECH Wireless Receiver System Control" (type: KEYBOARD, id 14)
[ 21.893] (II) event12 - XCTECH Wireless Receiver System Control: is tagged by udev as: Keyboard
[ 21.893] (II) event12 - XCTECH Wireless Receiver System Control: device is a keyboard
[ 21.895] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event16)
[ 21.895] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[ 21.895] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[ 21.896] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 38 paused 0
[ 21.896] (**) Integrated Camera: Integrated C: always reports core events
[ 21.896] (**) Option "Device" "/dev/input/event16"
[ 21.898] (II) event16 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 21.898] (II) event16 - Integrated Camera: Integrated C: device is a keyboard
[ 21.898] (II) event16 - Integrated Camera: Integrated C: device removed
[ 21.899] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-2/1-2:1.0/input/input20/event16"
[ 21.899] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 15)
[ 21.901] (II) event16 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 21.901] (II) event16 - Integrated Camera: Integrated C: device is a keyboard
[ 21.902] (II) config/udev: Adding input device Integrated Camera: Integrated I (/dev/input/event17)
[ 21.902] (**) Integrated Camera: Integrated I: Applying InputClass "libinput keyboard catchall"
[ 21.902] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated I'
[ 21.904] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 39 paused 0
[ 21.904] (**) Integrated Camera: Integrated I: always reports core events
[ 21.904] (**) Option "Device" "/dev/input/event17"
[ 21.906] (II) event17 - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[ 21.906] (II) event17 - Integrated Camera: Integrated I: device is a keyboard
[ 21.906] (II) event17 - Integrated Camera: Integrated I: device removed
[ 21.906] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-2/1-2:1.2/input/input21/event17"
[ 21.906] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated I" (type: KEYBOARD, id 16)
[ 21.908] (II) event17 - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[ 21.909] (II) event17 - Integrated Camera: Integrated I: device is a keyboard
[ 21.909] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event18)
[ 21.909] (II) No input driver specified, ignoring this device.
[ 21.909] (II) This device may have been added with another device file.
[ 21.910] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event19)
[ 21.910] (II) No input driver specified, ignoring this device.
[ 21.910] (II) This device may have been added with another device file.
[ 21.911] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[ 21.911] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 21.911] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 21.912] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 40 paused 0
[ 21.912] (**) Ideapad extra buttons: always reports core events
[ 21.912] (**) Option "Device" "/dev/input/event5"
[ 21.914] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 21.914] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 21.914] (II) event5 - Ideapad extra buttons: device removed
[ 21.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input14/event5"
[ 21.914] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 17)
[ 21.916] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 21.916] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 21.917] (II) config/udev: Adding input device MSFT0001:00 04F3:3138 Mouse (/dev/input/event7)
[ 21.917] (**) MSFT0001:00 04F3:3138 Mouse: Applying InputClass "libinput pointer catchall"
[ 21.917] (II) Using input driver 'libinput' for 'MSFT0001:00 04F3:3138 Mouse'
[ 21.918] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 41 paused 0
[ 21.918] (**) MSFT0001:00 04F3:3138 Mouse: always reports core events
[ 21.919] (**) Option "Device" "/dev/input/event7"
[ 21.920] (II) event7 - MSFT0001:00 04F3:3138 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.921] (II) event7 - MSFT0001:00 04F3:3138 Mouse: device is a pointer
[ 21.923] (II) event7 - MSFT0001:00 04F3:3138 Mouse: device removed
[ 21.923] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:02/i2c-2/i2c-MSFT0001:00/0018:04F3:3138.0002/input/input15/event7"
[ 21.923] (II) XINPUT: Adding extended input device "MSFT0001:00 04F3:3138 Mouse" (type: MOUSE, id 18)
[ 21.924] (**) Option "AccelerationScheme" "none"
[ 21.924] (**) MSFT0001:00 04F3:3138 Mouse: (accel) selected scheme none/0
[ 21.924] (**) MSFT0001:00 04F3:3138 Mouse: (accel) acceleration factor: 2.000
[ 21.924] (**) MSFT0001:00 04F3:3138 Mouse: (accel) acceleration threshold: 4
[ 21.925] (II) event7 - MSFT0001:00 04F3:3138 Mouse: is tagged by udev as: Mouse Pointingstick
[ 21.926] (II) event7 - MSFT0001:00 04F3:3138 Mouse: device is a pointer
[ 21.929] (II) config/udev: Adding input device MSFT0001:00 04F3:3138 Mouse (/dev/input/mouse1)
[ 21.929] (II) No input driver specified, ignoring this device.
[ 21.929] (II) This device may have been added with another device file.
[ 21.930] (II) config/udev: Adding input device MSFT0001:00 04F3:3138 Touchpad (/dev/input/event13)
[ 21.930] (**) MSFT0001:00 04F3:3138 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 21.930] (II) Using input driver 'libinput' for 'MSFT0001:00 04F3:3138 Touchpad'
[ 21.931] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 42 paused 0
[ 21.931] (**) MSFT0001:00 04F3:3138 Touchpad: always reports core events
[ 21.931] (**) Option "Device" "/dev/input/event13"
[ 21.933] (II) event13 - MSFT0001:00 04F3:3138 Touchpad: is tagged by udev as: Touchpad
[ 21.936] (II) event13 - MSFT0001:00 04F3:3138 Touchpad: device is a touchpad
[ 21.936] (II) event13 - MSFT0001:00 04F3:3138 Touchpad: device removed
[ 21.937] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:02/i2c-2/i2c-MSFT0001:00/0018:04F3:3138.0002/input/input17/event13"
[ 21.937] (II) XINPUT: Adding extended input device "MSFT0001:00 04F3:3138 Touchpad" (type: TOUCHPAD, id 19)
[ 21.939] (**) Option "AccelerationScheme" "none"
[ 21.940] (**) MSFT0001:00 04F3:3138 Touchpad: (accel) selected scheme none/0
[ 21.940] (**) MSFT0001:00 04F3:3138 Touchpad: (accel) acceleration factor: 2.000
[ 21.940] (**) MSFT0001:00 04F3:3138 Touchpad: (accel) acceleration threshold: 4
[ 21.941] (II) event13 - MSFT0001:00 04F3:3138 Touchpad: is tagged by udev as: Touchpad
[ 21.944] (II) event13 - MSFT0001:00 04F3:3138 Touchpad: device is a touchpad
[ 21.946] (II) config/udev: Adding input device MSFT0001:00 04F3:3138 Touchpad (/dev/input/mouse2)
[ 21.946] (II) No input driver specified, ignoring this device.
[ 21.946] (II) This device may have been added with another device file.
[ 21.947] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 21.947] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 21.947] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 21.948] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 43 paused 0
[ 21.948] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.948] (**) Option "Device" "/dev/input/event3"
[ 21.949] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.949] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.953] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 21.953] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 21.953] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 20)
[ 21.955] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 21.955] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 21.967] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 21.967] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[ 21.967] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72
[ 21.967] (**) SEM USB Keyboard Consumer Control: always reports core events
[ 21.967] (**) Option "Device" "/dev/input/event8"
[ 21.967] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[ 21.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.1/0003:1A2C:2124.0003/input/input9/event8"
[ 21.967] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 21)
[ 21.967] (**) XCTECH Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 21.967] (II) Using input driver 'libinput' for 'XCTECH Wireless Receiver Consumer Control'
[ 21.967] (II) systemd-logind: returning pre-existing fd for /dev/input/event11 13:75
[ 21.967] (**) XCTECH Wireless Receiver Consumer Control: always reports core events
[ 21.967] (**) Option "Device" "/dev/input/event11"
[ 21.967] (II) libinput: XCTECH Wireless Receiver Consumer Control: is a virtual subdevice
[ 21.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input12/event11"
[ 21.967] (II) XINPUT: Adding extended input device "XCTECH Wireless Receiver Consumer Control" (type: KEYBOARD, id 22)
[ 23.269] (II) AMDGPU(0): EDID vendor "CSO", prod id 1901
[ 23.269] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 23.269] (II) AMDGPU(0): Modeline "2560x1600"x0.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)
[ 277.878] (II) AMDGPU(0): EDID vendor "CSO", prod id 1901
[ 277.879] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 277.879] (II) AMDGPU(0): Modeline "2560x1600"x0.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)
[ 279.439] (II) AMDGPU(0): EDID vendor "CSO", prod id 1901
[ 279.439] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 279.439] (II) AMDGPU(0): Modeline "2560x1600"x0.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)
[ 357.546] (II) AMDGPU(0): EDID vendor "CSO", prod id 1901
[ 357.546] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 357.546] (II) AMDGPU(0): Modeline "2560x1600"x0.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)
[ 357.550] (II) AMDGPU(0): EDID vendor "CSO", prod id 1901
[ 357.550] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 357.550] (II) AMDGPU(0): Modeline "2560x1600"x0.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)
[ 1748.731] (II) AMDGPU(0): EDID vendor "CSO", prod id 1901
[ 1748.731] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 1748.731] (II) AMDGPU(0): Modeline "2560x1600"x0.0 268.60 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.8 kHz eP)dmsg
[ 0.000000] Linux version 6.2.9-arch1-1 (linux@archlinux) (gcc (GCC) 12.2.1 20230201, GNU ld (GNU Binutils) 2.40) #1 SMP PREEMPT_DYNAMIC Thu, 30 Mar 2023 14:51:14 +0000
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ca4a3ec6-04de-4962-9916-4fdca222ba9e rw loglevel=5
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009d80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000009d81000-0x0000000009efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000009f10000-0x00000000c757dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c757e000-0x00000000c777dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c777e000-0x00000000cb77dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cb77e000-0x00000000cd77dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd77e000-0x00000000cd7fdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cd7fe000-0x00000000ce7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce800000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fde00000-0x00000000fdefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ef33ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000003ef340000-0x000000042fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xcd7fd000 ACPI 2.0=0xcd7fd014 TPMFinalLog=0xcd62f000 SMBIOS=0xc9669000 SMBIOS 3.0=0xc965c000 ESRT=0xc83d7000
[ 0.000000] efi: Remove mem64: MMIO range=[0xfde00000-0xfdefffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfde00000-0xfdefffff] reserved
[ 0.000000] efi: Not removing mem65: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: LENOVO 82DM/LNVNB161216, BIOS F0CN15WW 04/27/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1796.561 MHz processor
[ 0.000012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000020] last_pfn = 0x3ef340 max_arch_pfn = 0x400000000
[ 0.000027] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000274] last_pfn = 0xce800 max_arch_pfn = 0x400000000
[ 0.003599] esrt: Reserving ESRT space from 0x00000000c83d7000 to 0x00000000c83d7060.
[ 0.003608] Using GB pages for direct mapping
[ 0.004041] Secure boot disabled
[ 0.004041] RAMDISK: [mem 0x36dc7000-0x376dafff]
[ 0.004045] ACPI: Early table checksum verification disabled
[ 0.004048] ACPI: RSDP 0x00000000CD7FD014 000024 (v02 LENOVO)
[ 0.004052] ACPI: XSDT 0x00000000CD7FB188 0000E4 (v01 LENOVO CB-01 00000003 PTEC 00000002)
[ 0.004057] ACPI: FACP 0x00000000C83FE000 000114 (v06 LENOVO CB-01 00000003 PTEC 00000002)
[ 0.004061] ACPI: DSDT 0x00000000C83F3000 007CC5 (v01 LENOVO AMD 00001000 INTL 20180313)
[ 0.004063] ACPI: FACS 0x00000000CCD80000 000040
[ 0.004065] ACPI: SSDT 0x00000000C969B000 000CE7 (v01 LENOVO UsbCTabl 00000001 INTL 20180313)
[ 0.004067] ACPI: SSDT 0x00000000C968E000 007216 (v02 LENOVO AmdTable 00000002 MSFT 04000000)
[ 0.004069] ACPI: IVRS 0x00000000C968D000 0001A4 (v02 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004071] ACPI: SSDT 0x00000000C964E000 000266 (v01 LENOVO STD3 00000001 INTL 20180313)
[ 0.004073] ACPI: MSDM 0x00000000C9617000 000055 (v03 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.004075] ACPI: BATB 0x00000000C9600000 00004A (v02 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.004077] ACPI: HPET 0x00000000C83FD000 000038 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004079] ACPI: APIC 0x00000000C83FC000 000138 (v02 LENOVO CB-01 00000000 PTEC 00000002)
[ 0.004081] ACPI: MCFG 0x00000000C83FB000 00003C (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004083] ACPI: VFCT 0x00000000C83E5000 00D484 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004085] ACPI: SSDT 0x00000000C83E1000 0039F4 (v01 LENOVO AmdTable 00000001 AMD 00000001)
[ 0.004087] ACPI: CRAT 0x00000000C83E0000 000F00 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004089] ACPI: CDIT 0x00000000C83DF000 000029 (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004091] ACPI: SSDT 0x00000000C83DE000 000556 (v01 LENOVO Tpm2Tabl 00009999 INTL 20180313)
[ 0.004093] ACPI: TPM2 0x00000000C83DD000 000038 (v04 LENOVO CB-01 00000002 PTEC 00000002)
[ 0.004095] ACPI: FPDT 0x00000000C83DC000 000034 (v01 LENOVO CB-01 00000002 PTEC 00000002)
[ 0.004097] ACPI: SSDT 0x00000000C83DA000 0013CF (v01 LENOVO AmdTable 00000001 INTL 20180313)
[ 0.004099] ACPI: SSDT 0x00000000C83D8000 001598 (v01 LENOVO AmdTable 00000001 INTL 20180313)
[ 0.004101] ACPI: SSDT 0x00000000C83D3000 00353C (v01 LENOVO AmdTable 00000001 INTL 20180313)
[ 0.004103] ACPI: BGRT 0x00000000C83D2000 000038 (v01 LENOVO CB-01 00000002 PTEC 00000002)
[ 0.004105] ACPI: UEFI 0x00000000CCD7E000 0000EE (v01 LENOVO CB-01 00000001 PTEC 00000002)
[ 0.004106] ACPI: SSDT 0x00000000C969A000 000090 (v01 LENOVO AmdTable 00000001 INTL 20180313)
[ 0.004108] ACPI: SSDT 0x00000000C9699000 0009AD (v01 LENOVO AmdTable 00000001 INTL 20180313)
[ 0.004110] ACPI: Reserving FACP table memory at [mem 0xc83fe000-0xc83fe113]
[ 0.004111] ACPI: Reserving DSDT table memory at [mem 0xc83f3000-0xc83facc4]
[ 0.004112] ACPI: Reserving FACS table memory at [mem 0xccd80000-0xccd8003f]
[ 0.004112] ACPI: Reserving SSDT table memory at [mem 0xc969b000-0xc969bce6]
[ 0.004113] ACPI: Reserving SSDT table memory at [mem 0xc968e000-0xc9695215]
[ 0.004114] ACPI: Reserving IVRS table memory at [mem 0xc968d000-0xc968d1a3]
[ 0.004114] ACPI: Reserving SSDT table memory at [mem 0xc964e000-0xc964e265]
[ 0.004115] ACPI: Reserving MSDM table memory at [mem 0xc9617000-0xc9617054]
[ 0.004115] ACPI: Reserving BATB table memory at [mem 0xc9600000-0xc9600049]
[ 0.004116] ACPI: Reserving HPET table memory at [mem 0xc83fd000-0xc83fd037]
[ 0.004116] ACPI: Reserving APIC table memory at [mem 0xc83fc000-0xc83fc137]
[ 0.004117] ACPI: Reserving MCFG table memory at [mem 0xc83fb000-0xc83fb03b]
[ 0.004118] ACPI: Reserving VFCT table memory at [mem 0xc83e5000-0xc83f2483]
[ 0.004118] ACPI: Reserving SSDT table memory at [mem 0xc83e1000-0xc83e49f3]
[ 0.004119] ACPI: Reserving CRAT table memory at [mem 0xc83e0000-0xc83e0eff]
[ 0.004120] ACPI: Reserving CDIT table memory at [mem 0xc83df000-0xc83df028]
[ 0.004120] ACPI: Reserving SSDT table memory at [mem 0xc83de000-0xc83de555]
[ 0.004121] ACPI: Reserving TPM2 table memory at [mem 0xc83dd000-0xc83dd037]
[ 0.004121] ACPI: Reserving FPDT table memory at [mem 0xc83dc000-0xc83dc033]
[ 0.004122] ACPI: Reserving SSDT table memory at [mem 0xc83da000-0xc83db3ce]
[ 0.004123] ACPI: Reserving SSDT table memory at [mem 0xc83d8000-0xc83d9597]
[ 0.004123] ACPI: Reserving SSDT table memory at [mem 0xc83d3000-0xc83d653b]
[ 0.004124] ACPI: Reserving BGRT table memory at [mem 0xc83d2000-0xc83d2037]
[ 0.004124] ACPI: Reserving UEFI table memory at [mem 0xccd7e000-0xccd7e0ed]
[ 0.004125] ACPI: Reserving SSDT table memory at [mem 0xc969a000-0xc969a08f]
[ 0.004126] ACPI: Reserving SSDT table memory at [mem 0xc9699000-0xc96999ac]
[ 0.004180] No NUMA configuration found
[ 0.004180] Faking a node at [mem 0x0000000000000000-0x00000003ef33ffff]
[ 0.004183] NODE_DATA(0) allocated [mem 0x3ef33b000-0x3ef33ffff]
[ 0.004205] Zone ranges:
[ 0.004205] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004206] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004208] Normal [mem 0x0000000100000000-0x00000003ef33ffff]
[ 0.004209] Device empty
[ 0.004209] Movable zone start for each node
[ 0.004210] Early memory node ranges
[ 0.004210] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.004211] node 0: [mem 0x0000000000100000-0x0000000009bfffff]
[ 0.004212] node 0: [mem 0x0000000009d81000-0x0000000009efffff]
[ 0.004213] node 0: [mem 0x0000000009f10000-0x00000000c757dfff]
[ 0.004214] node 0: [mem 0x00000000cd7fe000-0x00000000ce7fffff]
[ 0.004214] node 0: [mem 0x0000000100000000-0x00000003ef33ffff]
[ 0.004216] Initmem setup node 0 [mem 0x0000000000001000-0x00000003ef33ffff]
[ 0.004219] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.004235] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.004364] On node 0, zone DMA32: 385 pages in unavailable ranges
[ 0.009912] On node 0, zone DMA32: 16 pages in unavailable ranges
[ 0.010159] On node 0, zone DMA32: 25216 pages in unavailable ranges
[ 0.032608] On node 0, zone Normal: 6144 pages in unavailable ranges
[ 0.032641] On node 0, zone Normal: 3264 pages in unavailable ranges
[ 0.032751] ACPI: PM-Timer IO Port: 0x408
[ 0.032759] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.032760] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.032760] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.032761] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.032762] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.032762] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.032763] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.032763] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.032764] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.032764] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.032765] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.032765] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.032766] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.032766] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.032767] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.032767] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.032780] IOAPIC[0]: apic_id 32, version 33, address 0xfec00000, GSI 0-23
[ 0.032785] IOAPIC[1]: apic_id 33, version 33, address 0xfec01000, GSI 24-55
[ 0.032786] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.032788] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.032791] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.032792] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.032799] e820: update [mem 0xc2098000-0xc2278fff] usable ==> reserved
[ 0.032809] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.032824] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.032826] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.032827] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.032827] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.032828] PM: hibernation: Registered nosave memory: [mem 0x09c00000-0x09d80fff]
[ 0.032829] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0ffff]
[ 0.032831] PM: hibernation: Registered nosave memory: [mem 0xc2098000-0xc2278fff]
[ 0.032832] PM: hibernation: Registered nosave memory: [mem 0xc757e000-0xc777dfff]
[ 0.032832] PM: hibernation: Registered nosave memory: [mem 0xc777e000-0xcb77dfff]
[ 0.032833] PM: hibernation: Registered nosave memory: [mem 0xcb77e000-0xcd77dfff]
[ 0.032834] PM: hibernation: Registered nosave memory: [mem 0xcd77e000-0xcd7fdfff]
[ 0.032835] PM: hibernation: Registered nosave memory: [mem 0xce800000-0xcfffffff]
[ 0.032835] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.032836] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.032836] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfed7ffff]
[ 0.032837] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.032837] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xffffffff]
[ 0.032839] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.032840] Booting paravirtualized kernel on bare hardware
[ 0.032843] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.036811] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.037394] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[ 0.037403] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[ 0.037406] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.037430] Fallback order for Node 0: 0
[ 0.037433] Built 1 zonelists, mobility grouping on. Total pages: 3835986
[ 0.037433] Policy zone: Normal
[ 0.037434] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ca4a3ec6-04de-4962-9916-4fdca222ba9e rw loglevel=5
[ 0.037476] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[ 0.037510] random: crng init done
[ 0.039382] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.040322] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.040652] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.040696] software IO TLB: area num 16.
[ 0.081536] Memory: 15093856K/15588148K available (16384K kernel code, 2097K rwdata, 12572K rodata, 3276K init, 4100K bss, 494032K reserved, 0K cma-reserved)
[ 0.081653] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.081686] ftrace: allocating 46873 entries in 184 pages
[ 0.088298] ftrace: allocated 184 pages with 4 groups
[ 0.088382] Dynamic Preempt: full
[ 0.088417] rcu: Preemptible hierarchical RCU implementation.
[ 0.088418] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.088418] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.088419] Trampoline variant of Tasks RCU enabled.
[ 0.088420] Rude variant of Tasks RCU enabled.
[ 0.088420] Tracing variant of Tasks RCU enabled.
[ 0.088420] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.088421] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.090280] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.090456] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.090551] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.090582] Console: colour dummy device 80x25
[ 0.090584] printk: console [tty0] enabled
[ 0.090613] ACPI: Core revision 20221020
[ 0.090773] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.090791] APIC: Switch to symmetric I/O mode setup
[ 0.091647] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[ 0.091649] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[ 0.091650] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[ 0.091651] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[ 0.091651] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[ 0.091936] Switched APIC routing to physical flat.
[ 0.092672] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107464] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e579042df, max_idle_ns: 440795285263 ns
[ 0.107471] Calibrating delay loop (skipped), value calculated using timer frequency.. 3594.83 BogoMIPS (lpj=5988536)
[ 0.107474] pid_max: default: 32768 minimum: 301
[ 0.109445] LSM: initializing lsm=capability,landlock,lockdown,yama,integrity,bpf
[ 0.109459] landlock: Up and running.
[ 0.109461] Yama: becoming mindful.
[ 0.109472] LSM support for eBPF active
[ 0.109547] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.109599] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.109867] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.109924] LVT offset 1 assigned for vector 0xf9
[ 0.110027] LVT offset 2 assigned for vector 0xf4
[ 0.110051] process: using mwait in idle threads
[ 0.110052] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.110053] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.110060] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.110062] Spectre V2 : Mitigation: Retpolines
[ 0.110063] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.110064] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.110064] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.110065] RETBleed: Mitigation: untrained return thunk
[ 0.110066] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.110067] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
[ 0.110067] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.110068] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.121468] Freeing SMP alternatives memory: 40K
[ 0.228631] smpboot: CPU0: AMD Ryzen 7 4800U with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1)
[ 0.228763] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.228766] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.228777] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.228792] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.228801] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.228806] ... version: 0
[ 0.228807] ... bit width: 48
[ 0.228807] ... generic registers: 6
[ 0.228808] ... value mask: 0000ffffffffffff
[ 0.228808] ... max period: 00007fffffffffff
[ 0.228809] ... fixed-purpose events: 0
[ 0.228810] ... event mask: 000000000000003f
[ 0.228887] rcu: Hierarchical SRCU implementation.
[ 0.228887] rcu: Max phase no-delay instances is 1000.
[ 0.229224] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.229358] smp: Bringing up secondary CPUs ...
[ 0.229445] x86: Booting SMP configuration:
[ 0.229446] .... node #0, CPUs: #1
[ 0.230800] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.230800] Measured 5302127322 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.230800] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.230835] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.230976] #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.234533] smp: Brought up 1 node, 16 CPUs
[ 0.234533] smpboot: Max logical packages: 1
[ 0.234533] smpboot: Total of 16 processors activated (57512.36 BogoMIPS)
[ 0.238462] devtmpfs: initialized
[ 0.238462] x86/mm: Memory block size: 128MB
[ 0.241200] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0ffff] (65536 bytes)
[ 0.241200] ACPI: PM: Registering ACPI NVS region [mem 0xcb77e000-0xcd77dfff] (33554432 bytes)
[ 0.241200] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.241233] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.241287] pinctrl core: initialized pinctrl subsystem
[ 0.241394] PM: RTC time: 04:48:26, date: 2023-04-02
[ 0.241896] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.242293] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.242678] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.243068] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.243109] audit: initializing netlink subsys (disabled)
[ 0.243137] audit: type=2000 audit(1680410906.149:1): state=initialized audit_enabled=0 res=1
[ 0.243137] thermal_sys: Registered thermal governor 'fair_share'
[ 0.243137] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.243137] thermal_sys: Registered thermal governor 'step_wise'
[ 0.243137] thermal_sys: Registered thermal governor 'user_space'
[ 0.243137] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.243137] cpuidle: using governor ladder
[ 0.243137] cpuidle: using governor menu
[ 0.243137] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.243137] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.243137] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.243137] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[ 0.243137] PCI: Using configuration type 1 for base access
[ 0.244496] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.247511] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.247511] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.247511] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.247511] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.247607] fbcon: Taking over console
[ 0.247607] ACPI: Added _OSI(Module Device)
[ 0.247607] ACPI: Added _OSI(Processor Device)
[ 0.247607] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.247607] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.254909] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.255868] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.259073] ACPI: EC: EC started
[ 0.259073] ACPI: EC: interrupt blocked
[ 0.265989] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.265991] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[ 0.265993] ACPI: Interpreter enabled
[ 0.266004] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.266005] ACPI: Using IOAPIC for interrupt routing
[ 0.266482] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.266483] PCI: Using E820 reservations for host bridge windows
[ 0.267173] ACPI: \_SB_.PCI0.GPP4.PXSX.WRST: New power resource
[ 0.267700] ACPI: \_SB_.P0S0: New power resource
[ 0.267717] ACPI: \_SB_.P3S0: New power resource
[ 0.267766] ACPI: \_SB_.P0S1: New power resource
[ 0.267782] ACPI: \_SB_.P3S1: New power resource
[ 0.598681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.598687] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.598751] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
[ 0.598861] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.598862] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.598870] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.599020] PCI host bridge to bus 0000:00
[ 0.599021] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000effff window]
[ 0.599023] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[ 0.599024] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff window]
[ 0.599025] pci_bus 0000:00: root bus resource [mem 0x430000000-0xffffffffff window]
[ 0.599026] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.599027] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.599029] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.599041] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[ 0.599122] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[ 0.599196] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[ 0.599253] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[ 0.599307] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
[ 0.599378] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.599489] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400
[ 0.599560] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.599669] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[ 0.599724] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[ 0.599749] pci 0000:00:08.1: enabling Extended Tags
[ 0.599785] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.599900] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.599997] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.600127] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000
[ 0.600159] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000
[ 0.600191] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000
[ 0.600222] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000
[ 0.600254] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000
[ 0.600290] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000
[ 0.600321] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000
[ 0.600353] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000
[ 0.600454] pci 0000:01:00.0: [10ec:c822] type 00 class 0x028000
[ 0.600473] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.600498] pci 0000:01:00.0: reg 0x18: [mem 0xfd500000-0xfd50ffff 64bit]
[ 0.600618] pci 0000:01:00.0: supports D1 D2
[ 0.600619] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.600813] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.600816] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
[ 0.600818] pci 0000:00:02.2: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.601086] pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
[ 0.601104] pci 0000:02:00.0: reg 0x10: [mem 0xfd400000-0xfd403fff 64bit]
[ 0.601359] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.601364] pci 0000:00:02.4: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.601421] pci 0000:03:00.0: [1002:1636] type 00 class 0x030000
[ 0.601433] pci 0000:03:00.0: reg 0x10: [mem 0x460000000-0x46fffffff 64bit pref]
[ 0.601442] pci 0000:03:00.0: reg 0x18: [mem 0x470000000-0x4701fffff 64bit pref]
[ 0.601447] pci 0000:03:00.0: reg 0x20: [io 0x1000-0x10ff]
[ 0.601453] pci 0000:03:00.0: reg 0x24: [mem 0xfd300000-0xfd37ffff]
[ 0.601463] pci 0000:03:00.0: enabling Extended Tags
[ 0.601475] pci 0000:03:00.0: BAR 0: assigned to efifb
[ 0.601520] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.601630] pci 0000:03:00.1: [1002:1637] type 00 class 0x040300
[ 0.601638] pci 0000:03:00.1: reg 0x10: [mem 0xfd3c8000-0xfd3cbfff]
[ 0.601663] pci 0000:03:00.1: enabling Extended Tags
[ 0.601695] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.601746] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000
[ 0.601761] pci 0000:03:00.2: reg 0x18: [mem 0xfd200000-0xfd2fffff]
[ 0.601772] pci 0000:03:00.2: reg 0x24: [mem 0xfd3cc000-0xfd3cdfff]
[ 0.601780] pci 0000:03:00.2: enabling Extended Tags
[ 0.601874] pci 0000:03:00.3: [1022:1639] type 00 class 0x0c0330
[ 0.601886] pci 0000:03:00.3: reg 0x10: [mem 0xfd000000-0xfd0fffff 64bit]
[ 0.601914] pci 0000:03:00.3: enabling Extended Tags
[ 0.601948] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 0.602006] pci 0000:03:00.4: [1022:1639] type 00 class 0x0c0330
[ 0.602018] pci 0000:03:00.4: reg 0x10: [mem 0xfd100000-0xfd1fffff 64bit]
[ 0.602046] pci 0000:03:00.4: enabling Extended Tags
[ 0.602080] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
[ 0.602137] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000
[ 0.602146] pci 0000:03:00.5: reg 0x10: [mem 0xfd380000-0xfd3bffff]
[ 0.602170] pci 0000:03:00.5: enabling Extended Tags
[ 0.602202] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold
[ 0.602255] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300
[ 0.602264] pci 0000:03:00.6: reg 0x10: [mem 0xfd3c0000-0xfd3c7fff]
[ 0.602288] pci 0000:03:00.6: enabling Extended Tags
[ 0.602320] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold
[ 0.602392] pci 0000:00:08.1: PCI bridge to [bus 03]
[ 0.602395] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
[ 0.602397] pci 0000:00:08.1: bridge window [mem 0xfd000000-0xfd3fffff]
[ 0.602400] pci 0000:00:08.1: bridge window [mem 0x460000000-0x4701fffff 64bit pref]
[ 0.602498] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.602547] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.602582] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.602629] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.602671] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.602703] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.602734] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.602766] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.917713] ACPI: EC: interrupt unblocked
[ 0.917714] ACPI: EC: event unblocked
[ 0.917722] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.917722] ACPI: EC: GPE=0x3
[ 0.917723] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[ 0.917725] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[ 0.917770] iommu: Default domain type: Translated
[ 0.917770] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.917770] SCSI subsystem initialized
[ 0.917770] libata version 3.00 loaded.
[ 0.917770] ACPI: bus type USB registered
[ 0.917770] usbcore: registered new interface driver usbfs
[ 0.917770] usbcore: registered new interface driver hub
[ 0.917770] usbcore: registered new device driver usb
[ 2.837773] pps_core: LinuxPPS API ver. 1 registered
[ 2.837778] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.837787] PTP clock support registered
[ 2.837804] EDAC MC: Ver: 3.0.0
[ 2.838120] Registered efivars operations
[ 2.839359] NetLabel: Initializing
[ 2.839359] NetLabel: domain hash size = 128
[ 2.839359] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.839359] NetLabel: unlabeled traffic allowed by default
[ 2.839359] mctp: management component transport protocol core
[ 2.839359] NET: Registered PF_MCTP protocol family
[ 2.839359] PCI: Using ACPI for IRQ routing
[ 2.843370] PCI: pci_cache_line_size set to 64 bytes
[ 2.843667] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 2.843672] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
[ 2.843675] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
[ 2.843677] e820: reserve RAM buffer [mem 0xc2098000-0xc3ffffff]
[ 2.843680] e820: reserve RAM buffer [mem 0xc757e000-0xc7ffffff]
[ 2.843682] e820: reserve RAM buffer [mem 0xce800000-0xcfffffff]
[ 2.843684] e820: reserve RAM buffer [mem 0x3ef340000-0x3efffffff]
[ 2.844161] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 2.844165] pci 0000:03:00.0: vgaarb: bridge control possible
[ 2.844168] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 2.844173] vgaarb: loaded
[ 2.844230] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.844239] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 2.845287] clocksource: Switched to clocksource hpet
[ 2.845541] VFS: Disk quotas dquot_6.6.0
[ 2.845570] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.845725] pnp: PnP ACPI init
[ 2.846040] system 00:00: [io 0x0f50-0x0f51] has been reserved
[ 2.846048] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 2.846053] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.846058] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.846526] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 2.846531] system 00:03: [io 0x0530-0x0537] has been reserved
[ 2.846534] system 00:03: [io 0x0400-0x0427] has been reserved
[ 2.846537] system 00:03: [io 0x0430] has been reserved
[ 2.846540] system 00:03: [io 0x0440-0x0447] has been reserved
[ 2.846543] system 00:03: [io 0x0b00-0x0b1f] has been reserved
[ 2.846546] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 2.846549] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 2.846552] system 00:03: [io 0x0c14] has been reserved
[ 2.846555] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 2.846558] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 2.846561] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 2.846564] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 2.846567] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 2.846570] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 2.846576] system 00:03: [io 0x0cf9] could not be reserved
[ 2.846579] system 00:03: [io 0x8100-0x81ff window] has been reserved
[ 2.846583] system 00:03: [io 0x8200-0x82ff window] has been reserved
[ 2.846583] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
[ 2.846583] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 2.846583] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[ 2.846583] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 2.846583] system 00:04: [mem 0xfed61000-0xfed613ff] has been reserved
[ 2.846583] system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved
[ 3.154390] pnp: PnP ACPI: found 5 devices
[ 3.161924] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.162068] NET: Registered PF_INET protocol family
[ 3.162526] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 3.167278] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 3.167362] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 3.167550] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 3.168144] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 3.168369] TCP: Hash tables configured (established 131072 bind 65536)
[ 3.168564] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 3.168661] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 3.168742] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 3.168861] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 3.168873] NET: Registered PF_XDP protocol family
[ 3.168896] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 3.168904] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
[ 3.168909] pci 0000:00:02.2: bridge window [mem 0xfd500000-0xfd5fffff]
[ 3.168917] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 3.168921] pci 0000:00:02.4: bridge window [mem 0xfd400000-0xfd4fffff]
[ 3.168931] pci 0000:00:08.1: PCI bridge to [bus 03]
[ 3.168934] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
[ 3.168938] pci 0000:00:08.1: bridge window [mem 0xfd000000-0xfd3fffff]
[ 3.168941] pci 0000:00:08.1: bridge window [mem 0x460000000-0x4701fffff 64bit pref]
[ 3.168951] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000effff window]
[ 3.168953] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xf7ffffff window]
[ 3.168956] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfdffffff window]
[ 3.168958] pci_bus 0000:00: resource 7 [mem 0x430000000-0xffffffffff window]
[ 3.168960] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7 window]
[ 3.168962] pci_bus 0000:00: resource 9 [io 0x0d00-0xffff window]
[ 3.168965] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 3.168967] pci_bus 0000:01: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 3.168970] pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 3.168972] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 3.168974] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfd3fffff]
[ 3.168976] pci_bus 0000:03: resource 2 [mem 0x460000000-0x4701fffff 64bit pref]
[ 3.169416] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[ 3.169478] pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec
[ 3.169870] pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec
[ 3.170013] PCI: CLS 32 bytes, default 64
[ 3.170033] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 3.170114] pci 0000:00:01.0: Adding to iommu group 0
[ 3.170134] pci 0000:00:02.0: Adding to iommu group 1
[ 3.170136] Trying to unpack rootfs image as initramfs...
[ 3.170152] pci 0000:00:02.2: Adding to iommu group 2
[ 3.170167] pci 0000:00:02.4: Adding to iommu group 3
[ 3.170186] pci 0000:00:08.0: Adding to iommu group 4
[ 3.170197] pci 0000:00:08.1: Adding to iommu group 4
[ 3.170216] pci 0000:00:14.0: Adding to iommu group 5
[ 3.170227] pci 0000:00:14.3: Adding to iommu group 5
[ 3.170269] pci 0000:00:18.0: Adding to iommu group 6
[ 3.170283] pci 0000:00:18.1: Adding to iommu group 6
[ 3.170294] pci 0000:00:18.2: Adding to iommu group 6
[ 3.170307] pci 0000:00:18.3: Adding to iommu group 6
[ 3.170319] pci 0000:00:18.4: Adding to iommu group 6
[ 3.170331] pci 0000:00:18.5: Adding to iommu group 6
[ 3.170346] pci 0000:00:18.6: Adding to iommu group 6
[ 3.170361] pci 0000:00:18.7: Adding to iommu group 6
[ 3.170377] pci 0000:01:00.0: Adding to iommu group 7
[ 3.170391] pci 0000:02:00.0: Adding to iommu group 8
[ 3.170410] pci 0000:03:00.0: Adding to iommu group 4
[ 3.170422] pci 0000:03:00.1: Adding to iommu group 4
[ 3.170431] pci 0000:03:00.2: Adding to iommu group 4
[ 3.170441] pci 0000:03:00.3: Adding to iommu group 4
[ 3.170449] pci 0000:03:00.4: Adding to iommu group 4
[ 3.170458] pci 0000:03:00.5: Adding to iommu group 4
[ 3.170469] pci 0000:03:00.6: Adding to iommu group 4
[ 3.172190] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 3.172203] pci 0000:00:00.2: PCI INT A: not connected
[ 3.172666] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 3.172670] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 3.172683] AMD-Vi: Interrupt remapping enabled
[ 3.172684] AMD-Vi: X2APIC enabled
[ 3.172732] AMD-Vi: Virtual APIC enabled
[ 3.172928] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.172930] software IO TLB: mapped [mem 0x00000000be098000-0x00000000c2098000] (64MB)
[ 3.173001] LVT offset 0 assigned for vector 0x400
[ 3.173298] perf: AMD IBS detected (0x000003ff)
[ 3.173305] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 3.176604] Initialise system trusted keyrings
[ 3.176622] Key type blacklist registered
[ 3.176730] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 3.176752] zbud: loaded
[ 3.177008] integrity: Platform Keyring initialized
[ 3.177012] integrity: Machine keyring initialized
[ 3.182868] Key type asymmetric registered
[ 3.182870] Asymmetric key parser 'x509' registered
[ 3.182889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 3.182982] io scheduler mq-deadline registered
[ 3.182983] io scheduler kyber registered
[ 3.182998] io scheduler bfq registered
[ 3.184530] pcieport 0000:00:02.2: PME: Signaling with IRQ 26
[ 3.184670] pcieport 0000:00:02.4: PME: Signaling with IRQ 27
[ 3.184802] pcieport 0000:00:08.1: PME: Signaling with IRQ 28
[ 3.184907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.185738] ACPI: AC: AC Adapter [ADP0] (on-line)
[ 3.185806] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 3.185825] ACPI: button: Lid Switch [LID]
[ 3.185857] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.185876] ACPI: button: Power Button [PWRB]
[ 3.185911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.187543] ACPI: button: Power Button [PWRF]
[ 3.187628] Monitor-Mwait will be used to enter C-1 state
[ 3.187642] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 3.187651] ACPI: FW issue: working around C-state latencies out of order
[ 3.187821] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 3.187828] ACPI: FW issue: working around C-state latencies out of order
[ 3.187969] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 3.187976] ACPI: FW issue: working around C-state latencies out of order
[ 3.188203] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 3.188210] ACPI: FW issue: working around C-state latencies out of order
[ 3.188351] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 3.188358] ACPI: FW issue: working around C-state latencies out of order
[ 3.188528] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 3.188534] ACPI: FW issue: working around C-state latencies out of order
[ 3.188629] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[ 3.188634] ACPI: FW issue: working around C-state latencies out of order
[ 3.188736] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[ 3.188742] ACPI: FW issue: working around C-state latencies out of order
[ 3.188850] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[ 3.188856] ACPI: FW issue: working around C-state latencies out of order
[ 3.189028] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[ 3.189034] ACPI: FW issue: working around C-state latencies out of order
[ 3.189137] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[ 3.189143] ACPI: FW issue: working around C-state latencies out of order
[ 3.189313] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[ 3.189318] ACPI: FW issue: working around C-state latencies out of order
[ 3.189520] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[ 3.189530] ACPI: FW issue: working around C-state latencies out of order
[ 3.189757] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[ 3.189767] ACPI: FW issue: working around C-state latencies out of order
[ 3.189993] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[ 3.190003] ACPI: FW issue: working around C-state latencies out of order
[ 3.190223] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[ 3.190232] ACPI: FW issue: working around C-state latencies out of order
[ 3.190653] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.192609] Non-volatile memory driver v1.3
[ 3.192612] Linux agpgart interface v0.103
[ 3.207785] tpm tpm0: AMD fTPM version 0x3002900000005 causes system stutter; hwrng disabled
[ 3.208182] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 3.208274] ACPI: bus type drm_connector registered
[ 3.210326] usbcore: registered new interface driver usbserial_generic
[ 3.210333] usbserial: USB Serial support registered for generic
[ 3.210451] rtc_cmos 00:01: RTC can wake from S4
[ 3.210699] rtc_cmos 00:01: registered as rtc0
[ 3.210742] rtc_cmos 00:01: setting system clock to 2023-04-02T04:48:29 UTC (1680410909)
[ 3.210773] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.221663] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.222015] efifb: probing for efifb
[ 3.222036] efifb: framebuffer at 0x460000000, using 16000k, total 16000k
[ 3.222040] efifb: mode is 2560x1600x32, linelength=10240, pages=1
[ 3.222043] efifb: scrolling: redraw
[ 3.222044] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.222227] Console: switching to colour frame buffer device 160x50
[ 3.228037] fb0: EFI VGA frame buffer device
[ 3.228088] hid: raw HID events driver (C) Jiri Kosina
[ 3.228233] drop_monitor: Initializing network drop monitor service
[ 3.249211] Initializing XFRM netlink socket
[ 3.249261] NET: Registered PF_INET6 protocol family
[ 3.265671] Freeing initrd memory: 9296K
[ 3.273451] Segment Routing with IPv6
[ 3.273456] RPL Segment Routing with IPv6
[ 3.273474] In-situ OAM (IOAM) with IPv6
[ 3.273517] NET: Registered PF_PACKET protocol family
[ 3.275489] microcode: CPU3: patch_level=0x08600103
[ 3.275493] microcode: CPU2: patch_level=0x08600103
[ 3.275507] microcode: CPU0: patch_level=0x08600103
[ 3.275507] microcode: CPU1: patch_level=0x08600103
[ 3.275509] microcode: CPU4: patch_level=0x08600103
[ 3.275508] microcode: CPU5: patch_level=0x08600103
[ 3.275517] microcode: CPU8: patch_level=0x08600103
[ 3.275517] microcode: CPU6: patch_level=0x08600103
[ 3.275517] microcode: CPU7: patch_level=0x08600103
[ 3.275519] microcode: CPU13: patch_level=0x08600103
[ 3.275519] microcode: CPU9: patch_level=0x08600103
[ 3.275523] microcode: CPU12: patch_level=0x08600103
[ 3.275523] microcode: CPU11: patch_level=0x08600103
[ 3.275527] microcode: CPU14: patch_level=0x08600103
[ 3.275525] microcode: CPU15: patch_level=0x08600103
[ 3.275601] microcode: CPU10: patch_level=0x08600103
[ 3.275650] microcode: Microcode Update Driver: v2.2.
[ 3.276254] resctrl: L3 allocation detected
[ 3.276259] resctrl: MB allocation detected
[ 3.276261] resctrl: L3 monitoring detected
[ 3.276271] IPI shorthand broadcast: enabled
[ 3.279124] registered taskstats version 1
[ 3.280255] Loading compiled-in X.509 certificates
[ 3.285923] Loaded X.509 cert 'Build time autogenerated kernel key: 2d272c21a960141b42dac4dfb979442a035f629d'
[ 3.296518] ACPI: battery: Slot [BAT0] (battery present)
[ 3.297310] zswap: loaded using pool lz4/z3fold
[ 3.299797] Key type .fscrypt registered
[ 3.299801] Key type fscrypt-provisioning registered
[ 3.300607] integrity: Loading X.509 certificate: UEFI:db
[ 3.300617] integrity: Problem loading X.509 certificate -65
[ 3.300683] integrity: Error adding keys to platform keyring UEFI:db
[ 3.300684] integrity: Loading X.509 certificate: UEFI:db
[ 3.300711] integrity: Loaded X.509 cert 'F0S540-13ARE: fc8e1595ddbfada0495b0cfe47321de6'
[ 3.300712] integrity: Loading X.509 certificate: UEFI:db
[ 3.300742] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 3.300744] integrity: Loading X.509 certificate: UEFI:db
[ 3.300768] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 3.302145] PM: Magic number: 3:346:817
[ 3.302158] efi-framebuffer efi-framebuffer.0: hash matches
[ 3.302489] RAS: Correctable Errors collector initialized.
[ 3.302554] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 3.305028] Freeing unused decrypted memory: 2036K
[ 3.305984] Freeing unused kernel image (initmem) memory: 3276K
[ 3.379482] Write protecting the kernel read-only data: 30720k
[ 3.380156] Freeing unused kernel image (rodata/data gap) memory: 1764K
[ 3.451027] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.451035] rodata_test: all tests were successful
[ 3.451070] Run /init as init process
[ 3.451072] with arguments:
[ 3.451074] /init
[ 3.451076] with environment:
[ 3.451077] HOME=/
[ 3.451078] TERM=linux
[ 3.451079] BOOT_IMAGE=/vmlinuz-linux
[ 3.555068] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 3.555223] nvme nvme0: pci function 0000:02:00.0
[ 3.561578] nvme nvme0: missing or invalid SUBNQN field.
[ 3.561692] nvme nvme0: Shutdown timeout set to 8 seconds
[ 3.594144] nvme nvme0: 16/0/0 default/read/poll queues
[ 3.599149] nvme0n1: p1 p2 p3
[ 3.738665] xhci_hcd 0000:03:00.4: xHCI Host Controller
[ 3.738682] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 1
[ 3.738790] xhci_hcd 0000:03:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[ 3.738994] xhci_hcd 0000:03:00.3: xHCI Host Controller
[ 3.739012] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[ 3.739131] xhci_hcd 0000:03:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[ 3.739376] xhci_hcd 0000:03:00.4: xHCI Host Controller
[ 3.739382] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
[ 3.739387] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.739463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 3.739468] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.739472] usb usb1: Product: xHCI Host Controller
[ 3.739475] usb usb1: Manufacturer: Linux 6.2.9-arch1-1 xhci-hcd
[ 3.739478] usb usb1: SerialNumber: 0000:03:00.4
[ 3.739652] hub 1-0:1.0: USB hub found
[ 3.739666] hub 1-0:1.0: 4 ports detected
[ 3.739863] xhci_hcd 0000:03:00.3: xHCI Host Controller
[ 3.739931] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 4
[ 3.739938] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 3.739970] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.740017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 3.740021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.740025] usb usb3: Product: xHCI Host Controller
[ 3.740028] usb usb3: Manufacturer: Linux 6.2.9-arch1-1 xhci-hcd
[ 3.740030] usb usb3: SerialNumber: 0000:03:00.4
[ 3.740175] hub 3-0:1.0: USB hub found
[ 3.740188] hub 3-0:1.0: 2 ports detected
[ 3.740523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 3.740533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.740538] usb usb2: Product: xHCI Host Controller
[ 3.740542] usb usb2: Manufacturer: Linux 6.2.9-arch1-1 xhci-hcd
[ 3.740546] usb usb2: SerialNumber: 0000:03:00.3
[ 3.740649] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 3.740656] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.740821] hub 2-0:1.0: USB hub found
[ 3.740839] hub 2-0:1.0: 4 ports detected
[ 3.741269] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.741336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 3.741343] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.741347] usb usb4: Product: xHCI Host Controller
[ 3.741351] usb usb4: Manufacturer: Linux 6.2.9-arch1-1 xhci-hcd
[ 3.741355] usb usb4: SerialNumber: 0000:03:00.3
[ 3.741544] hub 4-0:1.0: USB hub found
[ 3.741559] hub 4-0:1.0: 2 ports detected
[ 3.741721] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.780420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.986346] EXT4-fs (nvme0n1p3): mounted filesystem ca4a3ec6-04de-4962-9916-4fdca222ba9e with ordered data mode. Quota mode: none.
[ 3.990854] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.990875] usb 2-2: new low-speed USB device number 2 using xhci_hcd
[ 4.091351] systemd[1]: systemd 253.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 4.091361] systemd[1]: Detected architecture x86-64.
[ 4.092352] systemd[1]: Hostname set to <xinbook>.
[ 4.180712] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.d3
[ 4.180721] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.180723] usb 1-1: Product: USB2.0 Hub
[ 4.180726] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 4.191135] usb 2-2: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[ 4.191146] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.191150] usb 2-2: Product: USB Keyboard
[ 4.191153] usb 2-2: Manufacturer: SEM
[ 4.219843] hub 1-1:1.0: USB hub found
[ 4.220235] hub 1-1:1.0: 4 ports detected
[ 4.346537] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[ 4.548242] usb 2-4: New USB device found, idVendor=0bda, idProduct=c123, bcdDevice= 0.00
[ 4.548253] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.548256] usb 2-4: Product: Bluetooth Radio
[ 4.548259] usb 2-4: Manufacturer: Realtek
[ 4.548262] usb 2-4: SerialNumber: 00e04c000001
[ 4.562978] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 4.780209] usb 1-2: New USB device found, idVendor=13d3, idProduct=56ba, bcdDevice=99.08
[ 4.780219] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.780223] usb 1-2: Product: Integrated Camera
[ 4.780226] usb 1-2: Manufacturer: Azurewave
[ 4.780228] usb 1-2: SerialNumber: 200901010001
[ 4.929740] systemd[1]: bpf-lsm: LSM BPF program attached
[ 5.036867] systemd[1]: /usr/lib/systemd/system/xray.service:7: Special user nobody configured, this is not safe!
[ 5.047303] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.063063] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
[ 5.249658] systemd[1]: Created slice Slice /system/getty.
[ 5.250336] systemd[1]: Created slice Slice /system/modprobe.
[ 5.250956] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 5.251445] systemd[1]: Created slice User and Session Slice.
[ 5.251612] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.251763] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.252046] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.252213] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.252315] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 5.252437] systemd[1]: Reached target Remote File Systems.
[ 5.252520] systemd[1]: Reached target Slice Units.
[ 5.252624] systemd[1]: Reached target Local Verity Protected Volumes.
[ 5.252785] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.253008] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.261356] systemd[1]: Listening on Process Core Dump Socket.
[ 5.261593] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.261807] systemd[1]: Listening on Journal Socket.
[ 5.262054] systemd[1]: Listening on udev Control Socket.
[ 5.262246] systemd[1]: Listening on udev Kernel Socket.
[ 5.263707] systemd[1]: Mounting Huge Pages File System...
[ 5.265167] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.266273] usb 1-1.3: New USB device found, idVendor=248a, idProduct=8566, bcdDevice= 1.00
[ 5.266284] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.266287] usb 1-1.3: Product: Wireless Receiver
[ 5.266289] usb 1-1.3: Manufacturer: XCTECH
[ 5.266523] systemd[1]: Mounting Kernel Debug File System...
[ 5.268015] systemd[1]: Mounting Kernel Trace File System...
[ 5.269831] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.273110] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.276228] systemd[1]: Starting Load Kernel Module configfs...
[ 5.279225] systemd[1]: Starting Load Kernel Module dm_mod...
[ 5.282100] systemd[1]: Starting Load Kernel Module drm...
[ 5.285003] systemd[1]: Starting Load Kernel Module fuse...
[ 5.287790] systemd[1]: Starting Load Kernel Module loop...
[ 5.289495] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 5.293083] systemd[1]: Starting Journal Service...
[ 5.296450] systemd[1]: Starting Load Kernel Modules...
[ 5.298092] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 5.299320] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.301545] device-mapper: uevent: version 1.0.3
[ 5.301665] loop: module loaded
[ 5.301793] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 5.303239] systemd[1]: Starting Coldplug All udev Devices...
[ 5.306098] fuse: init (API version 7.38)
[ 5.307559] systemd[1]: Mounted Huge Pages File System.
[ 5.307882] EXT4-fs (nvme0n1p3): re-mounted ca4a3ec6-04de-4962-9916-4fdca222ba9e. Quota mode: none.
[ 5.308762] systemd-journald[279]: Collecting audit messages is disabled.
[ 5.309856] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.311612] systemd[1]: Mounted Kernel Debug File System.
[ 5.313197] systemd[1]: Mounted Kernel Trace File System.
[ 5.324315] vboxdrv: loading out-of-tree module taints kernel.
[ 5.326109] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 5.349033] vboxdrv: Found 16 processor cores/threads
[ 5.354641] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.357152] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.374843] vboxdrv: TSC mode is Invariant, tentative frequency 1796692391 Hz
[ 5.374849] vboxdrv: Successfully loaded version 7.0.6 r155176 (interface 0x00330004)
[ 5.378844] VBoxNetAdp: Successfully started.
[ 5.385732] VBoxNetFlt: Successfully started.
[ 5.418030] systemd[1]: Finished Load Kernel Module configfs.
[ 5.419920] systemd[1]: Started Journal Service.
[ 5.430853] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd
[ 5.602517] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[ 5.602529] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 5.602533] usb 1-1.4: Product: USB 10/100/1000 LAN
[ 5.602536] usb 1-1.4: Manufacturer: Realtek
[ 5.602538] usb 1-1.4: SerialNumber: 001000001
[ 6.099984] systemd-journald[279]: Received client request to flush runtime journal.
[ 6.115188] systemd-journald[279]: /var/log/journal/ee00b495d0084db6b4d69751f656f6f0/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[ 6.115199] systemd-journald[279]: Rotating system journal.
[ 6.823907] acpi_cpufreq: overriding BIOS provided _PSD data
[ 6.839822] Serial bus multi instantiate pseudo device driver INT3515:00: error -ENXIO: IRQ index 1 not found
[ 6.841879] Serial bus multi instantiate pseudo device driver INT3515:00: error -ENXIO: Error requesting irq at index 1
[ 6.868496] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.868503] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 6.873601] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.887685] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 6.887691] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.896379] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.0/0003:1A2C:2124.0001/input/input4
[ 6.917064] Adding 15646716k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:15646716k SSFS
[ 6.928692] input: MSFT0001:00 04F3:3138 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-MSFT0001:00/0018:04F3:3138.0002/input/input5
[ 6.949233] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.959191] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input8
[ 6.959864] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:03:00.3-2/input0
[ 6.962478] input: MSFT0001:00 04F3:3138 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-MSFT0001:00/0018:04F3:3138.0002/input/input7
[ 6.962579] cryptd: max_cpu_qlen set to 1000
[ 6.969072] hid-generic 0018:04F3:3138.0002: input,hidraw1: I2C HID v1.00 Mouse [MSFT0001:00 04F3:3138] on i2c-MSFT0001:00
[ 6.981229] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.1/0003:1A2C:2124.0003/input/input9
[ 7.047129] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb2/2-2/2-2:1.1/0003:1A2C:2124.0003/input/input10
[ 7.047251] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:03:00.3-2/input1
[ 7.068067] input: XCTECH Wireless Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input11
[ 7.068231] input: XCTECH Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input12
[ 7.130164] input: XCTECH Wireless Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8566.0004/input/input13
[ 7.130261] hid-generic 0003:248A:8566.0004: input,hidraw3: USB HID v1.11 Mouse [XCTECH Wireless Receiver] on usb-0000:03:00.4-1.3/input0
[ 7.130309] usbcore: registered new interface driver usbhid
[ 7.130311] usbhid: USB HID core driver
[ 7.138734] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 7.138894] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 7.139055] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 7.140293] AVX2 version of gcm_enc/dec engaged.
[ 7.140530] AES CTR mode by8 optimization enabled
[ 7.190873] ACPI Error: No handler for Region [ECSI] (0000000061f27c56) [EmbeddedControl] (20221020/evregion-130)
[ 7.193242] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20221020/exfldio-261)
[ 7.195015] ACPI Error: Aborting method \_SB.UBTC.ECRD due to previous error (AE_NOT_EXIST) (20221020/psparse-529)
[ 7.196932] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_NOT_EXIST) (20221020/psparse-529)
[ 7.198884] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f (0x6)
[ 7.200849] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 2
[ 7.206236] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input14
[ 7.211150] ideapad_acpi VPC2004:00: Keyboard backlight control not available
[ 7.221050] ideapad_acpi VPC2004:00: DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable
[ 7.221054] ideapad_acpi VPC2004:00: DYTC interface is not available
[ 7.267819] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.281984] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.283015] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.286535] cfg80211: failed to load regulatory.db
[ 7.288028] input: MSFT0001:00 04F3:3138 Mouse as /devices/platform/AMDI0010:02/i2c-2/i2c-MSFT0001:00/0018:04F3:3138.0002/input/input15
[ 7.288161] input: MSFT0001:00 04F3:3138 Touchpad as /devices/platform/AMDI0010:02/i2c-2/i2c-MSFT0001:00/0018:04F3:3138.0002/input/input17
[ 7.293960] hid-multitouch 0018:04F3:3138.0002: input,hidraw1: I2C HID v1.00 Mouse [MSFT0001:00 04F3:3138] on i2c-MSFT0001:00
[ 7.300907] ccp 0000:03:00.2: enabling device (0000 -> 0002)
[ 7.301205] ccp 0000:03:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[ 7.311369] ccp 0000:03:00.2: tee enabled
[ 7.311378] ccp 0000:03:00.2: psp enabled
[ 7.317152] mousedev: PS/2 mouse device common for all mice
[ 7.331874] snd_rn_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002)
[ 7.530393] mc: Linux media interface: v0.10
[ 7.636894] usbcore: registered new interface driver r8152
[ 7.637698] Bluetooth: Core ver 2.22
[ 7.637747] NET: Registered PF_BLUETOOTH protocol family
[ 7.637750] Bluetooth: HCI device and connection manager initialized
[ 7.637762] Bluetooth: HCI socket layer initialized
[ 7.637767] Bluetooth: L2CAP socket layer initialized
[ 7.637774] Bluetooth: SCO socket layer initialized
[ 7.654794] SVM: TSC scaling supported
[ 7.654801] kvm: Nested Virtualization enabled
[ 7.654803] SVM: kvm: Nested Paging enabled
[ 7.654824] SVM: Virtual VMLOAD VMSAVE supported
[ 7.654825] SVM: Virtual GIF supported
[ 7.654827] SVM: LBR virtualization supported
[ 7.656323] videodev: Linux video capture interface: v2.00
[ 7.669045] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[ 7.669217] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[ 7.669243] usbcore: registered new interface driver cdc_ether
[ 7.669436] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
[ 7.681177] MCE: In-kernel MCE decoding enabled.
[ 7.697647] usbcore: registered new interface driver r8153_ecm
[ 7.698102] rtw_8822ce 0000:01:00.0: enabling device (0000 -> 0003)
[ 7.712651] rtw_8822ce 0000:01:00.0: Firmware version 9.9.14, H2C version 15
[ 7.723282] rtw_8822ce 0000:01:00.0: WOW Firmware version 9.9.4, H2C version 15
[ 7.728338] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input18
[ 7.728464] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input19
[ 7.731163] usbcore: registered new interface driver btusb
[ 7.732043] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
[ 7.733052] Bluetooth: hci0: RTL: rom_version status=0 version=3
[ 7.733062] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
[ 7.734834] usb 1-2: Found UVC 1.50 device Integrated Camera (13d3:56ba)
[ 7.735831] intel_rapl_common: Found RAPL domain package
[ 7.735839] intel_rapl_common: Found RAPL domain core
[ 7.739976] rtw_8822ce 0000:01:00.0 wlp1s0: renamed from wlan0
[ 7.741304] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
[ 7.741354] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-2/1-2:1.0/input/input20
[ 7.743419] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35458
[ 7.743561] usb 1-2: Found UVC 1.50 device Integrated Camera (13d3:56ba)
[ 7.745541] input: Integrated Camera: Integrated I as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb1/1-2/1-2:1.2/input/input21
[ 7.745629] usbcore: registered new interface driver uvcvideo
[ 7.853147] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.853160] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.853165] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.853168] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.853170] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.853173] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 7.853175] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 7.867557] usb 1-1.4: reset high-speed USB device number 5 using xhci_hcd
[ 7.900782] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input22
[ 7.900928] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input23
[ 8.051092] Bluetooth: hci0: RTL: fw version 0xffb8abd3
[ 8.103063] r8152 1-1.4:1.0: load rtl8153b-2 v1 10/23/19 successfully
[ 8.157292] Bluetooth: hci0: AOSP extensions version v1.00
[ 8.157300] Bluetooth: hci0: AOSP quality report is supported
[ 8.166991] r8152 1-1.4:1.0 eth0: v1.12.13
[ 8.327578] ucsi_acpi: probe of USBC000:00 failed with error -5
[ 11.581143] [drm] amdgpu kernel modesetting enabled.
[ 11.584986] amdgpu: Virtual CRAT table created for CPU
[ 11.585008] amdgpu: Topology: Add CPU node
[ 11.585154] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[ 11.585223] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x17AA:0x3811 0xC1).
[ 11.585320] [drm] register mmio base: 0xFD300000
[ 11.585321] [drm] register mmio size: 524288
[ 11.586971] [drm] add ip block number 0 <soc15_common>
[ 11.586974] [drm] add ip block number 1 <gmc_v9_0>
[ 11.586976] [drm] add ip block number 2 <vega10_ih>
[ 11.586977] [drm] add ip block number 3 <psp>
[ 11.586979] [drm] add ip block number 4 <smu>
[ 11.586981] [drm] add ip block number 5 <dm>
[ 11.586982] [drm] add ip block number 6 <gfx_v9_0>
[ 11.586984] [drm] add ip block number 7 <sdma_v4_0>
[ 11.586986] [drm] add ip block number 8 <vcn_v2_0>
[ 11.586987] [drm] add ip block number 9 <jpeg_v2_0>
[ 11.587007] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[ 11.587010] amdgpu: ATOM BIOS: 113-RENOIR-025
[ 11.590274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.590281] Bluetooth: BNEP filters: protocol multicast
[ 11.590287] Bluetooth: BNEP socket layer initialized
[ 11.590451] r8152 1-1.4:1.0 enp3s0f4u1u4: renamed from eth0
[ 11.590715] [drm] VCN decode is enabled in VM mode
[ 11.590718] [drm] VCN encode is enabled in VM mode
[ 11.590720] [drm] JPEG decode is enabled in VM mode
[ 11.590947] Console: switching to colour dummy device 80x25
[ 11.591017] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 11.591021] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[ 11.591027] amdgpu 0000:03:00.0: amdgpu: PCIE atomic ops is not supported
[ 11.591039] amdgpu 0000:03:00.0: amdgpu: MODE2 reset
[ 11.591102] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 11.591111] amdgpu 0000:03:00.0: amdgpu: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[ 11.591114] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 11.591117] amdgpu 0000:03:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[ 11.591125] [drm] Detected VRAM RAM=1024M, BAR=1024M
[ 11.591127] [drm] RAM width 128bits DDR4
[ 11.591252] [drm] amdgpu: 1024M of VRAM memory ready
[ 11.591255] [drm] amdgpu: 7424M of GTT memory ready.
[ 11.591280] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 11.591416] [drm] PCIE GART of 1024M enabled.
[ 11.591417] [drm] PTB located at 0x000000F43FC00000
[ 11.592987] Bluetooth: MGMT ver 1.22
[ 11.603120] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[ 11.603137] amdgpu 0000:03:00.0: amdgpu: PSP runtime database doesn't exist
[ 11.605881] NET: Registered PF_ALG protocol family
[ 11.614401] [drm] Loading DMUB firmware via PSP: version=0x01010026
[ 11.670161] [drm] Found VCN firmware Version ENC: 1.19 DEC: 5 VEP: 0 Revision: 0
[ 11.670190] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[ 12.120999] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f4u1u4: link becomes ready
[ 12.122064] r8152 1-1.4:1.0 enp3s0f4u1u4: carrier on
[ 12.357439] [drm] reserve 0x400000 from 0xf43f400000 for PSP TMR
[ 12.417053] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 12.423918] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 12.428051] [drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7)
[ 12.428186] [drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
[ 12.428196] amdgpu 0000:03:00.0: amdgpu: Secure display: Generic Failure.
[ 12.428203] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: query securedisplay TA failed. ret 0x0
[ 12.428396] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[ 12.428701] [drm] Display Core initialized with v3.2.215!
[ 12.429342] [drm] DMUB hardware initialized: version=0x01010026
[ 12.448624] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 12.564255] [drm] kiq ring mec 2 pipe 1 q 0
[ 12.566781] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 12.566801] [drm] JPEG decode initialized successfully.
[ 12.569182] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 12.569286] amdgpu: sdma_bitmap: 3
[ 12.619703] memmap_init_zone_device initialised 262144 pages in 4ms
[ 12.619716] amdgpu: HMM registered 1024MB device memory
[ 12.619754] amdgpu: SRAT table not found
[ 12.619763] amdgpu: Virtual CRAT table created for GPU
[ 12.619864] amdgpu: Topology: Add dGPU node [0x1636:0x1002]
[ 12.619868] kfd kfd: amdgpu: added device 1002:1636
[ 12.619924] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 8
[ 12.620041] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 12.620044] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
[ 12.620046] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
[ 12.620048] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
[ 12.620050] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
[ 12.620052] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
[ 12.620055] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
[ 12.620057] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
[ 12.620058] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
[ 12.620060] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
[ 12.620063] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
[ 12.620064] amdgpu 0000:03:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0
[ 12.620066] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 12.620068] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 12.620070] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 12.620072] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 12.620074] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 12.622283] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:03:00.0 on minor 0
[ 12.622832] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 12.630182] fbcon: amdgpudrmfb (fb0) is primary device
[ 12.630544] [drm] DSC precompute is not needed.
[ 12.632649] Bridge firewalling registered
[ 12.698045] Console: switching to colour frame buffer device 160x50
[ 12.721155] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 12.954907] docker0: port 1(vethfef3112) entered blocking state
[ 12.954915] docker0: port 1(vethfef3112) entered disabled state
[ 12.955000] device vethfef3112 entered promiscuous mode
[ 12.955109] docker0: port 1(vethfef3112) entered blocking state
[ 12.955112] docker0: port 1(vethfef3112) entered forwarding state
[ 12.955586] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 12.955942] docker0: port 1(vethfef3112) entered disabled state
[ 13.424711] eth0: renamed from vethc23ab4f
[ 13.461598] IPv6: ADDRCONF(NETDEV_CHANGE): vethfef3112: link becomes ready
[ 13.461649] docker0: port 1(vethfef3112) entered blocking state
[ 13.461655] docker0: port 1(vethfef3112) entered forwarding state
[ 17.006180] systemd-journald[279]: /var/log/journal/ee00b495d0084db6b4d69751f656f6f0/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[ 24.048404] Bluetooth: RFCOMM TTY layer initialized
[ 24.048425] Bluetooth: RFCOMM socket layer initialized
[ 24.048435] Bluetooth: RFCOMM ver 1.11最近编辑记录 hying (2023-04-02 13:45:35)
离线
页次： 1