Acer4745G过热关机

Huozic · 2012-11-10 17:14:37

[Huozic@ArchLinux-Acer-4745G ~]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +83.0°C (crit = +105.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +83.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +83.0°C (high = +95.0°C, crit = +105.0°C)

radeon-pci-0100
Adapter: PCI adapter
temp1: +91.5°C

==================================================

一开机就上面这个温度了，折腾了很久，不知道怎么解决啊，求坛友们分享下经验。我到底需要装什么东西，要配置什么，如何检测自己的安装配置是否正确？

依云 · 2012-11-10 18:16:27

现在是冬天啊，CPU 全速运行也不至于的啊……检查下硬件？

Huozic · 2012-11-10 19:01:01

百合仙子说：

现在是冬天啊，CPU 全速运行也不至于的啊……检查下硬件？

可是我win下什么问题都没啊……

依云 · 2012-11-10 19:06:25

Huozic 说：

百合仙子说：
现在是冬天啊，CPU 全速运行也不至于的啊……检查下硬件？
可是我win下什么问题都没啊……

cpupower -c all frequency-info 看看？

Huozic · 2012-11-10 19:39:42

百合仙子说：

Huozic 说：
百合仙子说：
现在是冬天啊，CPU 全速运行也不至于的啊……检查下硬件？
可是我win下什么问题都没啊……
cpupower -c all frequency-info 看看？

analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.40 GHz
available frequency steps: 2.40 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 1.20 GHz and 2.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.40 GHz
available frequency steps: 2.40 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 1.20 GHz and 2.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
analyzing CPU 2:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.40 GHz
available frequency steps: 2.40 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 1.20 GHz and 2.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
analyzing CPU 3:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 10.0 us.
hardware limits: 1.20 GHz - 2.40 GHz
available frequency steps: 2.40 GHz, 2.40 GHz, 2.27 GHz, 2.13 GHz, 2.00 GHz, 1.87 GHz, 1.73 GHz, 1.60 GHz, 1.47 GHz, 1.33 GHz, 1.20 GHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 1.20 GHz and 2.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.20 GHz.
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores

lightning1141 · 2012-11-10 19:47:59

关掉独显试试

Huozic · 2012-11-10 19:53:43

lightning1141 说：

关掉独显试试

如何关独显？我bios只能禁用集显。

sigma · 2012-12-17 18:28:34

独显驱动是编译进内核还是用的模块？

枫叶饭团 · 2012-12-20 20:35:39

显卡问题而已

Arch Linux

#1 2012-11-10 17:14:37

Acer4745G过热关机

#2 2012-11-10 18:16:27

Re: Acer4745G过热关机

#3 2012-11-10 19:01:01

Re: Acer4745G过热关机

#4 2012-11-10 19:06:25

Re: Acer4745G过热关机

#5 2012-11-10 19:39:42

Re: Acer4745G过热关机

#6 2012-11-10 19:47:59

Re: Acer4745G过热关机

#7 2012-11-10 19:53:43

Re: Acer4745G过热关机

#8 2012-12-17 18:28:34

Re: Acer4745G过热关机

#9 2012-12-20 20:35:39

Re: Acer4745G过热关机

页脚